Use for the Tesla Switch

[scratchrobot]

What I was saying is that if you wanted to try and use the "input" batts drive the pulser and then "charge" the "input batts" (kind of a self runner) then you would have issues and could fry components.

Good Job

Bit's

Thank U, I learned a lot from your circuit's

I made another video with the solar panel as input and the input current stay's stable

SolarPanel_In-Out

I also found some video's I made a while back of my Scalar Charger (self runner), maybe someone find's them interesting...

Scalar Charger1
Scalar Charger2

scratchrobot

[Jules Tresor]

Hi scratchrobot, do I have to read the all thread to find the details on your setup, or do you have a file or a website with all resumed ?
Thanks for sharing

[Bit's-n-Bytes]

Thank U, I learned a lot from your circuit's

I made another video with the solar panel as input and the input current stay's stable

scratchrobot

You may have one of the tranny's not turning fully off, or your cap bank is not fully getting charged in the time you pulse to empty them. You also may have a "Leaky Cap".

Just my thoughts

Bit's

[scratchrobot]

Hi scratchrobot, do I have to read the all thread to find the details on your setup, or do you have a file or a website with all resumed ?
Thanks for sharing

I posted the circuit earlier today so just go a few post's back and U will find it.

Since the sun is shining so bright today I couldn't resist to do another video with my tiny solar pannel TS_PVAmp_Panel2.jpg as the input

I love the Sun

scratchrobot

[Bit's-n-Bytes]

I posted the circuit earlier today so just go a few post's back and U will find it.

Since the sun is shining so bright today I couldn't resist to do another video with my tiny solar pannel [ATTACH]5557[/ATTACH] as the input

I love the Sun

scratchrobot

Scratchrobot, are you using the PIC to control the pulses?

[scratchrobot]

Scratchrobot, are you using the PIC to control the pulses?

Yes I am using the picaxe.

[mksboysal]

Tesla Switch "mechanical version"

Hi all, I thought you guys may want to see the latest project that I am working with: Mechanical version of the Tesla switch, all is left is switch contacts wire terminals, diode bride and the capacitors.

It's not an easy project to tackle with, but I was so curious about it so
decided to get on with it. I don't know that it will work but here it's guys.

See the video: YouTube - Tesla switch

One thing I am thinking right now is what type of brushes to use?
If you have any idea or a suggestion please share it.
thanks
Mehmet


this one it's an interesting need tool, you may want to save the link.
http://www.physicshelp4u.com/physics...LC_circuit.swf

[Jules Tresor]

@scratchrobot:
It's amazing how you last video shows the same effect as Bedini's Solar Switch

I think he puts several such circuits in parallel in his larger models, and with the same input he can pulse several cap banks (just my opinion)

And the wire moving with each impulse is also the same on Bedini video ... he could send pulses showing 60 A on the output through a very small wire. This give to think that it's cold electricity, not the normal one !

Just his output pulses seem a bit longer than yours, but that might just be tunning, or one of his secret inside his pulsers ...

Are you member of Panacea with Ashtweth ?

[Jules Tresor]

Those tubes ...

@scratchrobot:
Sorry I didn't see your question about the 'tubes'.



They are modified transistors, By John Bedini, to make negative resistors/oscillators.
He talked about a few years ago, but we never knew what was inside.
Now he revealed it in the DVDs, number 12 'Petrovoltaics', and number 18 'transmutation'. The Tom Bearden Website - online store

(they are not related to the patent, but I included them on the picture, at that time I didn't know how it was made)

IMO it's a piece of stone connected to the transistor contacts, to create a non linear transistor, that is connected to the Lattice. See the DVD attentively

About the following picture:
Notice that the values of elements might not be exact.
I made this picture a few years back, and values are from the patent's text, but the text is somewhat confusing at some points.



So please check the patent yourself to be sure of the right values (don't forget I know nothing in electronics, but by doing this 'pictures' I just wanted to help with the little I could at that time)
The complete webpage is here: Zero Point Energy - John Bedini Solid State Generator - MDG 2007

[scratchrobot]

@scratchrobot:
Sorry I didn't see your question about the 'tubes'.

Thank U very much for answering my question and doing the 'pictures'
I also know almost nothing in electronics but find Bedini's circuit's very interesting and read this patent many times already.

I'm gonna search for some rocks now

scratchrobot

[Xenomorph]

Thank U very much for answering my question and doing the 'pictures'
I also know almost nothing in electronics but find Bedini's circuit's very interesting and read this patent many times already.

I'm gonna search for some rocks now

scratchrobot

I consider that rock-issue very interesting.
What kind of mineral could it be?
According to Bearden, that is Bedini´s speciality.
As a kid he used to build his own transistors out of rocks.
So i guess just putting "any rock" onto the pins won´t do it.
If the circuit really amplifies, it must be mainly attributed to
negative resistance or non-linearly operating components, which should
be investigated.

[Jules Tresor]

He shows the rock in the video and explains how it works, and we can see for a fraction of a second the inside of this modified transistor.
Then in DVD 18 he explains how he made the negative resistors, the process to extract the material from different kind of rocks.

In DVD 12 he also describes that Moray machine was using this kind of valves, and Bearden tells us how many of those valves/diodes Moray has in his converter.

Bedini says A LOT in those DVD, but he still stops several times in the middle or start of a sentence, and we can feel that he still scared to reveal much because of SEVERAL death threats he received during his life of discoveries ...

I wish I had his knowledge and ability to manufacture free electricity devices, because I would have spread them all around without scaring to die.

Of course you can not stay in a huge house with a brand new corvette and delicious meals everyday if you want to fight to change this world !

But everyone has freedom of choice, everything as a purpose ... not judging, nobody is to be blamed as says Dr Lindemann ... people is not ready for free electricity ... energy monopole in the hand of those gangsters is not a problem, see BP's latest innovation, viva el petrol !
(this last paragraph was sarcastic)

[Jules Tresor]

Back to the switch

To come back to your very interesting experiments, I wanted to add that if you load the charging battery with lights for example, the pulses should become higher.
As we saw in the video by Bedini for Energenx (taken off youtube already) named "Tesla Switch Solar Amplifier with Solar Panels-high"; he was running the switch from 2x200W solar panels, and then when he asked to Rick to switch on the load (car headlights), the pulses to the battery went from 7A peak to 12A peak !!! And Bedini said "it's gona regulate to compensate for the load"

This brings me to the idea that, after the pulse in the caps and disconnection from the source, floating time, the caps are charging from the environment, and when you connect the load battery, it increases the pumping effect, and that why if the battery are bigger or more load is added, more energy is pumped from the environment in the caps, and sent to the load ...

Can you try with added load in // of the batteries ? If the pulses increase that might prove that you have the exact same effect has Bedini.

[scratchrobot]

Yes I have tried that already.. the circuit I use does not disconnect from the source but YES my caps are charging from the environment (PV panel)

I do get the same effect, the bigger the load the higher the output, while the battery is getting charged the pulses are getting lower.

Made a video of shunting the LED an adding a load to the battery, because the Sun was not shining I used my power supply as the input
TS_PV_Amp_No_LED_Bulb.MOV

scratchrobot

[Xenomorph]

To come back to your very interesting experiments, I wanted to add that if you load the charging battery with lights for example, the pulses should become higher.
As we saw in the video by Bedini for Energenx (taken off youtube already) named "Tesla Switch Solar Amplifier with Solar Panels-high"; he was running the switch from 2x200W solar panels, and then when he asked to Rick to switch on the load (car headlights), the pulses to the battery went from 7A peak to 12A peak !!! And Bedini said "it's gona regulate to compensate for the load"

This brings me to the idea that, after the pulse in the caps and disconnection from the source, floating time, the caps are charging from the environment, and when you connect the load battery, it increases the pumping effect, and that why if the battery are bigger or more load is added, more energy is pumped from the environment in the caps, and sent to the load ...

Can you try with added load in // of the batteries ? If the pulses increase that might prove that you have the exact same effect has Bedini.

Well to achieve that effect you would have to make sure that your circuit is having a negative resistance or inductance, then every now ohm of load resistance will increase the energy.