Awarded machine multiply force from a motor (free energy)

[daveportland]

Any time you have acceleration you are opening a connection between the dimensions allowing an access to energy sources beyond the physical. This is true of linear acceleration, rotational acceleration, mass acceleration. The rate of change and the change of the rate of change, first and second derivatives in calculus access higher dimensional properties. This is true in electricity with waveforms, change of voltage. Once you open the doorway you can access the energy beyond through resonant tuning or focused intention. You are created in Gods image and therefore you are a God and the physical world will bow unto you if you know who you are and use it. If you open the door, command the energy to move, and have the faith that it will, as you believe so it will be done unto you by our father in Heaven. The energy here is in fixed form due to our collective will but as you go up the dimensions through these derivatives it is less mass, more energy, and more fluid. All reality molds to our will. It is the inventors will that sets the purpose, and the faith that gives him the means to achieve the purpose. Going into free energy is easier if you understand some basic metaphysics because the free energy comes from a metaphysical realm not a physical one.
I really want to thank you all for the good work you are doing! God Bless you and may everyone bringing forth this knowledge be protected and safe.

[Antonio90]

Hi..

language is Bulgarian...I know few words ,he told output 180 volt,he told is works and explain size of flywheels ....he had not exact RPM


Antonio

[Fr4nK7]

Sorry for my english but. has anyone seen these videos?

Fernando Sixto Ramos - YouTube
Fernando Sixto Ramos II - YouTube

Is a russian guy who has built the sixto ramos's system. But i can't understand what is he saying. Can you?

[Rubberband]

Sorry Peter

Hey Everybody,

This thread is about Sixto Ramos Force Multiplier design. Let's take ALL of these other ideas to a new thread, so this one can get back ON TOPIC.

I have started a new thread here: Mechanical Devices with Energy Gain

Thanks,
Peter

[/I]I didn't read to your post until after I posted, again my appology, wally

[Rubberband]

gravity wheel

Stealth,

I am not a newbie, rather a retired machinist, a master builder. Some of my projects...

rohndoe's channel - YouTube

I have worked with other inventors and have had COP 3 devices. My Ramos replication has had over 1000 views. It would not take much on your part to indicate a new direction for me. You have made the claims, I am prepared to follow up on them.

Ron

Hello Ron, I've enjoyed watching your videos. Your work is excellent, and I was wondering if you have ever worked with pendulum controlled swing weights as shown in my video here....
Title07.mpg - YouTube.....
I saw your work with your reversing switch one, mine uses spring controlled advancing wheel, like the centrificals in an old style ignition distributer. My life, has kept me from being able to build it in only the manner shown in the video. Please let me know here if you would like more info, as to build it. Thanks, Wally

[vrand]

One way or another I will do something soon. I hope you all can obtain and benefit from this design. Good Luck. stealth

Thank you for the info on your interesting energy devices, looking forward to your designs and research results.
Cheers

[Peter Lindemann]

Starting a New Thread

Hey Everybody,

This thread is about Sixto Ramos Force Multiplier design. Let's take ALL of these other ideas to a new thread, so this one can get back ON TOPIC.

I have started a new thread here: Mechanical Devices with Energy Gain

Thanks,
Peter

[tachyon]

I have designed similar machine.

[spiner]

Generation of Free Momentum

Stefan Marinov perpetuum mobile, mechanical. I´ve not constructed it, but the maths are easy , i´m sure it works. It is simple, construct a inertial engine and the movement of it is free energy, make it run in a circle and close the loop.

[spiner]

Stealth:

You can try to record a video. Record the video in front of one official act, like a sport competition or political act. Explain the invention in the video. Keep the video in safe site, spread your invention in an anonymous form, later when your invention is known worldwide, you can publish the video. All people will know that you are the inventor because all people would know the record date of the video.
You recorded the video in front of an official act, so people know the exact date of the video.

[markusbraunfe]

Stealth, my logic is the following:
if the government wiill hinder you to patent it because it is a free energy device, then if you release the idea on the internet for free and some other guy will try to patent it, then he will run into the same problems as any free energy device inventor and he will not get the patent.
So I see no danger from posting it here. Moreover if you post it on serveral sites on the internet and copywrite it (and perhaps release an official E-Book on Amazon) with your real name, then I think there is enough evidence that your idea constitutes prior art and cannot be patented.

Of course if you fear the backlash againt free energy inventors and want to release in an anoymous form then it will be more difficult to prove that you are the original inventor.
One way I could think of, would be to release your plans on several sites at once and include a cryptographic public key (PGP,GPG etc). This way in future you can sign messages, post them online and still prove that you are the original inventor and if you wish at a later time you can come forward with your real name.

Meanwhile Mikhail Dimitriyev seems to make progress with his gravity wheel (COP 3.0). He says he could extract up to 10kW from 250kg of rotating masses.
http://www.energeticforum.com/renewa...ar-3000-w.html

The concept seems simple and easy to reproduced, and he described the how it works on peswiki.com.
10kW is a considerable power. (with 3-5kW you can run most one family house). With 10kW you could even heat your (insulated) flat or house.
Add an electric car and you are energy independent.
I think his device can be constructed for a couple thousand $. This means it pays back in under a year.
This is what I call "good enough technology".

So I think the first viable machine like this one will begin to spread fast and other, better ideas will stay underdeveloped because their inventors do not want to release them or at least don't give all clues how to reproduce the device.
Like Fernando's force multiplier. Seems trivial from the videos and information posted so far, but no one has yet managed to show an overunity effect yet.

So Stealth, consider releasing something that let's people replicate a working device and steal some accolades from Mikhail
Two heros are better than one.

[leely1]

What I don't want, is to post it, let someone patent it, then be forbidden for me and everyone else to build and use it. Seems this is an ongoing topic on this forum, expecially. I can see why some wont post certain diagrams and or details about their projects. The best advice I recieved was to make it into a book and copywirte it, but I don't really want to have the expense of doing that and having to charge for the book. If I were to write a book, I would include many of the diagrams I made in it and and also the prototypes. I wish we lived closer together so we could work together. I will be glad to help you if I can. Good luck. stealth

How many people replicate the machine in other to patent it? It is still one person. I believe a machinist can make an invention and share it to the world, anyone who copies it to patent it, the patent will not be recognised by the world because it is known to be a free info.

[i_ron]

I like your youtube video. I too, am a retired machinist, and CNC Machinist. You are on the right track already with your motor assembly. I have reexamined the posted motor-generator more closely and it has forces working in it that mine does not. Mine is a simpler easier built system. I am not sure how much COP his has as it is could be a complicated build. I have been talking to some people about posting my "torque converter", and have been given mixed answers. What I don't want, is to post it, let someone patent it, then be forbidden for me and everyone else to build and use it. Seems this is an ongoing topic on this forum, expecially. I can see why some wont post certain diagrams and or details about their projects. The best advice I recieved was to make it into a book and copywirte it, but I don't really want to have the expense of doing that and having to charge for the book. If I were to write a book, I would include many of the diagrams I made in it and and also the prototypes. I wish we lived closer together so we could work together. I will be glad to help you if I can. Good luck. stealth

I agree, however email and Skype make the world smaller. You could write a book while working with a small group also. but that is your decision.
I have no patents and wish to have no patents as I believe it is just a control institution of the PTB to have their finger on the pulse of invention and knowing when to intercede to limit certain items that are contrary to their agenda.

For starters if you wish to contact me through my public email it is... iron1of1(at)yahoo.com and from that will follow my regular email.

Ron

[Peter Lindemann]

Digital Publishing

I like your youtube video. I too, am a retired machinist, and CNC Machinist. You are on the right track already with your motor assembly. I have reexamined the posted motor-generator more closely and it has forces working in it that mine does not. Mine is a simpler easier built system. I am not sure how much COP his has as it is could be a complicated build. I have been talking to some people about posting my "torque converter", and have been given mixed answers. What I don't want, is to post it, let someone patent it, then be forbidden for me and everyone else to build and use it. Seems this is an ongoing topic on this forum, especially. I can see why some wont post certain diagrams and or details about their projects. The best advice I received was to make it into a book and copyright it, but I don't really want to have the expense of doing that and having to charge for the book. If I were to write a book, I would include many of the diagrams I made in it and and also the prototypes. I wish we lived closer together so we could work together. I will be glad to help you if I can. Good luck. stealth

Stealth,

Writing a book or creating a filmed lecture and publishing it is EXACTLY what Aaron and I have been doing for the last 4 years. We can provide a wide variety of services to put the material in final form, create and maintain the websites where it is marketed and pay you a royalty. You can see that we have produced a number of the lectures from last July's Conference, covered all of the costs of production and post-production, and made the finished product available at a nominal price. We would be honored to work with you on a project like this.

Thanks,
Peter

[i_ron]

I am flattered by the invitation to become a protege of mine. It is hard to do over the internet, and even when its live many problems can arise. Mostly because of the way people have been schooled. I have taken a young man who had formal schooling and trying to teach him what I have discovered. It is hard to get him to forget some of the things taught to him in school. If you really want to be a protoge, look at some of the master builders here on this forum, follow their teachings and do their experiments. No matter which field of expertise you want to pursue, there are many here doing the same thing. Many newbies are replicating and building, trying to understand how it all works. There are many very diversified fields and individuals in those fields, who are only happy to help guide your path. I wish it were so that I could teach many the things I have discovered over the last 25 years. Many of the designs I have drawn, I haven't had the time to build. Many are on notebooks, done long before computers were made. I am mostly involved with mechanical, magnetic and gravatational devices, but have replicated some of the electronic systems here, especially the Tesla switch. Good luck. stealth

Stealth,

I am not a newbie, rather a retired machinist, a master builder. Some of my projects...

rohndoe's channel - YouTube

I have worked with other inventors and have had COP 3 devices. My Ramos replication has had over 1000 views. It would not take much on your part to indicate a new direction for me. You have made the claims, I am prepared to follow up on them.

Ron