Awarded machine multiply force from a motor (free energy)

[daveportland]

Any time you have acceleration you are opening a connection between the dimensions allowing an access to energy sources beyond the physical. This is true of linear acceleration, rotational acceleration, mass acceleration. The rate of change and the change of the rate of change, first and second derivatives in calculus access higher dimensional properties. This is true in electricity with waveforms, change of voltage. Once you open the doorway you can access the energy beyond through resonant tuning or focused intention. You are created in Gods image and therefore you are a God and the physical world will bow unto you if you know who you are and use it. If you open the door, command the energy to move, and have the faith that it will, as you believe so it will be done unto you by our father in Heaven. The energy here is in fixed form due to our collective will but as you go up the dimensions through these derivatives it is less mass, more energy, and more fluid. All reality molds to our will. It is the inventors will that sets the purpose, and the faith that gives him the means to achieve the purpose. Going into free energy is easier if you understand some basic metaphysics because the free energy comes from a metaphysical realm not a physical one.
I really want to thank you all for the good work you are doing! God Bless you and may everyone bringing forth this knowledge be protected and safe.

[ashtweth]

I agree, however email and Skype make the world smaller. You could write a book while working with a small group also. but that is your decision.
I have no patents and wish to have no patents as I believe it is just a control institution of the PTB to have their finger on the pulse of invention and knowing when to intercede to limit certain items that are contrary to their agenda.

For starters if you wish to contact me through my public email it is... iron1of1(at)yahoo.com and from that will follow my regular email.

Ron

Stealth, i agree, Ron would be the best direction and will change every thing, he has been waiting for an opportunity like this please consider connecting with Ron

Ash

[Danny B]

Ash, good to see you. I just joined.
The OTG list seems to be in paralysis.
I'm replicating the Ramos device. I have a couple of insights that might be of interest.
The device has to be built extremely rigid. I'm using 12" I-beam. The device must be "clocked" with 1 eccentric down the the other eccentric "up". It will only counter-rotate in this iteration. If both eccentrics are in the "up" position, it will rotate both axles in the same direction.
As has been posted here, the axles are constantly accelerating and decelerating during each revolution. I'm using a strobe tach that freezes action very nicely.
There has been speculation that the device causes some kind of pulsation in the GEN armature that is some kind of over unity effect. It is doubtful.

Ramos was asked about using the device to pump water. He replied that a motor wouldn't be necessary,,, that it could be done with a bicycle-pedal arrangement.

I believe that the 2 axles go into a free oscillation. I believe that this dictates that the drive belts must be loose. People have suggested a one-way clutch to drive. I don't believe that a one-way clutch would allow adequate freedom of oscillation. Ramos is a smart guy. He could have brought the axles up to speed in another manner other than leaving the belts loose. I believe that the belts need to slip in either direction

If you look at his blue machine, you see that it is all painted. The unpainted wheels on the primary axle appear to be additions. I believe that; when he added the mass of the armature on the GEN to the secondary axle, he had to increase the mass of the primary axle. You can also see the unpainted mass added to the painted mass on the lolipop device.

It appears that one has to balance the mass of the 2 axles and allow them to freely oscillate. Apparently, the big lolipop device augments/aggravates the oscillation. Like the milokevick? device, it needs to be unbalanced.
I suspect that the "Aspden effect" is coming into play.

I built a nice replica of the device designed by Raoul Hatem. It has 4- 7" wheels,,, 96 mags 3/4 X 3/4. I'm hoping to mate it with the Sixto Ramos device. I would like to eventually drive it with a big "window motor".
I have several 3.5 " by 10.5 " magnets for a start. I'm lacking in motivation and electrical experience.
Dan

[Apolopy]

News from Sixto System

Hi Every one:

I just want to tell you all something intresting, as you know I live in Paraguay that is relative close to Peru, so I finaly hire a Patent Lawyer here to search for a copy of the Sixto's Patent, my lawyer said that it would be easy to get couse Peru is in the WIPO, but after a 3 weeks looking for and talking to his Peruvian friends he realize that the Peruvian goverment is breaking the normal rules in this matter and is not alouding any one to get a copy, he say to me that it was the first time it happend to him.

So maybe, just maybe this is real deal.


Apolopy.

[Peter Lindemann]

Thank You for the News!

Dear Apolopy,

Thank you for this post. It certainly is an interesting development. From what your Patent Lawyer said, it seems we will not have access to copies of the Patent through Peruvian channels. The one good piece of news is that the Patent is being registered through the WIPO system, and therefore we may be able to search it out through European websites listing WIPO documents.

So far, this is all that exists at EPO: Espacenet - Bibliographic data

In any case, it is looking more and more likely that home experimenters will be the ones who replicate this invention and report their findings.

Thanks, again.

Peter

[cubalibre]

Hello

After the filing to the patent office it will last 18months till publication.
This period allows the inventer to use as head start, as well as change the wording of the filed idea a little bit, to get better protection. Of course during this time nobody is allowed to see the files, except the guys from the patent office doing research.

That is my understanding of the procedure of a patent.

Regards
cubalibre

[Danny B]

Interesting quote from DePalma relevant to Ramos.
"The archetypal gravitational engine or Free Energy machine is a combination of two counter-rotating gyroscopes with axles parallel and rotors co-planar."
The Secret of the Force Machine

[Danny B]

Ramos, Ucros

I found a schematic vid for Ucros that looks SO much like Ramos.
https://www.youtube.com/watch?v=_WPZZkGyM8I
Ramos uses discs. Ucros uses sectors. Judging by the results of Chalkalis and Purely primitives, I believe that sectors are superior.

[iwosof]

https://www.youtube.com/watch?v=eGFuR6NOtoo

[BroMikey]

https://www.youtube.com/watch?v=eGFuR6NOtoo

[VIDEO]https://www.youtube.com/watch?v=dPe1zB5JQmU[/VIDEO]




It has been about two years since the publication of my innovation, in which I basically show that in order to exploit earth's attraction we must initially add external energy as in any combustion engine. Today, we have scientific confirmation of its functionality with mathematical explanations and analyses.
Some people's comment that if it works I should place a generator, even to use one from a car, in order to I show them that we have more energy. (overunity)

I DECLARE
1) As I've written in the past, my electrical knowledge as well as the means available to me are meager if not completely missing.

2) I have NO obligation to anyone to prove something and in particular to persons that cannot estimate the torque and force that we have in the axis of the system, in relation to the energy required in order to operate the system.

I do know that someone's interests are at stake. I have my doubts about those who govern us as well as about some organized activists, supposedly fighting for a better world. If they are really interested, why don't they change the system of registration of innovations? Why do they force most inventors to take their innovations to the grave with them? All it requires is a law where you have the first publication to protect the rights of an inventor.

I have donated the work of life with the belief that there are people that can benefit of my idea and of what I show and explain. From the comments that I am receiving until today, I understand that some people act ironically and negatively to anything that goes beyond of their limited knowledge as well as that their inability to analyze something new, before expressing their negative opinion.

Honorable ladies and gentlemen, irrelevantly of all the above mentioned and with the hope of a better tomorrow, I am presenting you my latest work. Believing that the exploitation of gravity is subject of geometric relations and proportions of the rotated bodies, I am showing you today in video, my new innovation. A revolution in free energy, a phenomenon which I believe that finally opens the way for the exploitation of the inexhaustible energy source of earth's gravity.

A big thank you to all of you who were involved and all of you who encouraged me with your good words. Especially to Dr. F.M.Kanarev.

The video that you will see is clear enough and probative.

The rotating mass is 45 kilograms with arm length 700mm.

This innovation is a donation for any non commercial use.
Commercial use, can be carried out only with the written consent of the inventor.
Fotios Miltiadis Chalkalis

Link 1: http://www.energeticforum.com/renewa...nati*on-9.html

[BroMikey]

F.M.CHALKALIS ENERGY MULTIPLIER


[VIDEO]https://www.youtube.com/watch?v=iHhZZ9DuzK4[/VIDEO]


We all know about the inexhaustible energy produced by gravity. Through the years a lot of people have tried and are still trying to make use of it, especially nowadays that the energy problems are so serious.
As far as I know, a lot of inventions have been made regarding this resource but none has been exploitable.
After 28 years of hard work, many disappointments, personal expenses and the valuable help of my son in the last couple of years, I have recently ended up with the conclusion of something unbelievably simple. So simple that many people could build it on their own.
Just by making use of common known natural phenomena such as the earth's attraction (gravitational force), centrifugal power, the lever, the flywheel etc
It is about a mechanism that multiplies any kind of kinetic energy by 800% to 1100% and functions with speed regulation as a common motor.
The referred data are based on an already existing prototype that has been constructed with simple materials.
It could also be auto supplied (run on its own power) with the appropriate technical means which unfortunately I do not have. It is absolutely friendly to the environment, its functionality and performance are not affected by weather conditions and it has a low cost of construction.
For greater needs, more than one mechanism can be connected by freewheels and work independently transmitting their power to a single drive shaft.
Before the presentation of the video and the designs that are attached regarding its construction, I must conclude by saying that if people lived in harmony with nature and paid more attention to its laws and the way it works without "abusing" it, a lot of our problems would have been solved.
This innovation is donated to humanity and I'm hoping for your help to make it known and useful to all.

Yours Sincerely
F.M.Chalkalis.

[BroMikey]

ETHELOTIFLIA

(Willful Blindness)


Happy New Year.
My wish for everyone to have good Health and that there
be Peace and Love which unfortunately lessen more and more everyday in our civilization.
The congratulation messages of some
people that even equate me to the great Leonardo Da Vinci
give me the strength to continue my work.
I did not have the opportunity to study physics.
Maybe if I had studied I would have never got involved
with this matter.
For many years now, there are scientists shouting that
Newton's theory is wrong.
I have also proved that in practice using my invention.
Because in my opinion, in this theory the centrifugal force
is misestimated and the effect (the phenomenon) of the lever
disregarded, as well as Gravity.

Dear fellow humans, considering the amount of information
exchange and communication available today, e.g. internet,
it really makes me sad to realize that the Willful blindness
of a large proportion of humanity place us in a situation,
worse than it was in the Middle Ages. They are prisoners of
what they have been taught being unable to think on their own.
What I do not understand and troubles me, is that great
scientists got to the point of searching the God in CERN and
yet they could not change fundamental errors in physics we
are being taught for more than 300 years now.
Also, I do not understand the other scientists and leaders
of this world, who supposedly care for alternative energy,
yet all the various development programs, adopt only solar,
wind, bio-fuels, etc. ignoring Gravity, the endless energy to
which we owe our existence as written by great scientists
such as Stephen Hawking, F.M. Kanarev and others.





ONE MORE ENERGY OUTPUT POINT OF THE SYSTEM



At number 4 of the comments I wrote, I say that special
attention should be given to the base and the elastics.
Later I realized that my calculations
«300 RPM x 50 kg = 15000 kg / min which means 900 tons
per hour » were wrong. I did not calculate that at the 300 RPM
of the existing prototype, the main weight is rotating at a speed
of 57,650 Km / h and the external weight is rotating (running)
at a speed of 126,604 Km / h.
Therefore the pulse pressures are much higher and at
300RPM exceed the 25.000 N
Witnessing the size of that force made me realize that
we can get output energy from another point of the system
as well. Without changing any of the previous data.
Since then, I have conducted various experiments, trying
to convert these pulse pressures to a rotary motion, but
with no successful results so far. Other, larger forces, appear
in the system, changing the expected behavior.
Some friends advise the use of a piezoelectric system for
the collection of that power. Insisting and emphasizing, that
this energy alone is enough.
Unfortunately I have no knowledge of this technology,
nor access to it.

This innovation has been donated and belongs to humanity.
Hopping to the help of Every One of Us for further development.
In the past I have written about who I am and how I work.
I have never asked for anything personally.
A kind request. It would be great, if anyone willing
and able to help in any way to this effort, would communicate
through email.

Fotios M. Chalkalis


These are the latest data and development:

CHANGES IN THE DRIVING SYSTEM
The driving system is placed at 36° degrees and
the first pulse is given while the second weight is
located at the 1° degree. As a result, there is Smoother
operation, almost silent and impressively less power
consumption in the driving system.

[Arker]

Sixto Ramos, the old Warrior

Hi all,

This thread is about Sixto Ramos Multiplier, isn't ?
Someone reminded this on post #130 on this page :

Hey Everybody,

This thread is about Sixto Ramos Force Multiplier design. Let's take ALL of these other ideas to a new thread, so this one can get back ON TOPIC.

I have started a new thread here: Mechanical Devices with Energy Gain

Thanks,
Peter Lindemann

I am preparing a post on the last marked knock of the old Master, always on the road.

You remember what Apolopy exposed in his post #139 above :

I just want to tell you all something intresting, as you know I live in Paraguay that is relative close to Peru, so I finaly hire a Patent Lawyer here to search for a copy of the Sixto's Patent, my lawyer said that it would be easy to get couse Peru is in the WIPO, but after a 3 weeks looking for and talking to his Peruvian friends he realize that the Peruvian goverment is breaking the normal rules in this matter and is not alouding any one to get a copy, he say to me that it was the first time it happend to him.

Well, Sixto has taken back control ...


Best regards,
Arker

[Arker]

New patent ... (This post is about Sixto Ramos Amplifier)

Hi every one,

I had built a replica of this machine in 2012. But no O.U.
Since then I interrogate the patent platforms from time to time, hoping to read one day the famous peruvian patent ...

It is done ! And I report it immediately on this good Energeticforum because I have not seen this info on any of the major forums, although the publication would go back to 3 years.

Fernando Sixto has therefore foiled the peruvian authorities' embargo on his invention, quite simply by addressing elsewhere than INDECOPI-LIMA.

It was in Madrid, at the OFICINA ESPANOLA DE PATENTE, that he submitted a new file on march 27, 2013. But not for a Spanish patent : he managed to reunite the money for an expensive world patent ...

number : WO2014158036,
officially released on : october 2, 2014,
language of publication : spanish,
english title : "Device for increasing the mechanical energy supplied by a motor"

____________

This patent is in fact an improved variant of the original patent. Here is my redescription (personal and minimalist) :

- The first patent had 2 identical parts, coupled by a connecting arm. One assured the action, and the other the reaction.
An approximate Kapitza pendulum stabilized the system as soon as it entered parametric resonance. (Piotr Kapitsa is a physicist, Nobel Prize.)

- The 2nd patent retains only the action part of the initial model; and has only one shaft. Here the reaction is provided by coupling to two magnets in opposition, this via a short sliding arm and a ball joint.

- It is therefore the spring which undergoes the variations of the eccentric and feedbacking favorably on the single shaft.



I don't speak well english -I live in France.
Friendly,
Arker

[Cloxxki]

Good find!

Any hope there may be physics allowing it to work? Wouldd you like a stab at explaining it to the world better than (invariably) any OU inventors can explain their own?
Thanks!