My Asymmetric Electrodynamic Machines

[Ufopolitics]

As everyone know, heat is our enemy.
Keep it Clean and Green
Midaz

What you mean heat is our enemy??!!

For example...Heat is no enemy to Mark Ross A1mOgEn replication!!...as a matter of fact it has served greatly as the Highest Heating Producing Unit He ever had for the past very cold nights in Great Britain!!

It has kept Him and all his family very warm during all this very cold winter!!

And He says is pretty simple to build...the only thing to really worry is the electric Bill$$$$!

[Ufopolitics]

Nice Video...why deleting it?

Why having such nice video deleted...??

[VIDEO]https://www.youtube.com/watch?v=7AqR4qso5KI&feature=youtu.be[/VIDEO]

ORIGINAL DELETED VIDEO

Well, that video inspired me to make this video-song below (the so many times repeated "stop" it actually "blends" into a "top,top,top"..., plus the screaming at the end!, Oh that was the base rhythm "Uh", yeah!)... I sequenced them all...repeating into a nice "beat"......all dedicated to the a1mogEn...excellent engineering designer work !!.

A1MOGEN RHAPSODY

[VIDEO]https://www.youtube.com/watch?v=SDwkIUC6GlI[/VIDEO]

Hope you guys enjoy it...because I did while mixing it...

And yes you could use it to advertise your a1mOgEn Campaign...My pleasure!

If you want to add any rapping lyrics...I will add them up...something like:

Yo, yeah My Mo Gen Man!
I built this piece of crap,
and all I've got is this rap
Holy Smoke it ran!

Then repeat...and so on...you know, just an idea

Oh!...and a nice Pic advertising it!

[IMG][/IMG]

I believe is a heck of a "package"!!


Japanese Engineers for sure are going to be dying for it!


Ufopolitics

[Midaztouch]

As everyone know, heat is our enemy. If your thinking about racing buy the highest temperature wire coating.

When making the Singular Coil = A1MoGen... Keep in mind that the singular coils are usually smaller diameter than pair or group winds.... The A1MoGens will need thinner wires for correct ohms.

For Asymetric Motors. the specs that was set 2yrs ago was a target of 1.2 ohms - 1.4 ohms.... UFO, has that spec changed for the all North motors?


Keep it Clean and Green
Midaz

Now that the crazy & simple petty minded talk is done, let's keep moving forward.

[Midaztouch]

The only problem I see with the A1MoGen... Is YOU can claim it as your idea.

Raul,

Please tell everyone when and were to find the post when YOU made the three pole first... It looks like another member made the 3pole motor first. Then, as usual, you only made the CAD and put you name all over it.

Just checking. Things need to be factual around here.

Midaz

Ufo, this is a trap. Keep your mouth shut about the 3pole

[Midaztouch]

You are so FULL of it...

18 awg is the PERFECT Gauge for this Motor.

"Yesterday" was a "MUST" to use Higher Gauge...and "Today" is much Thinner wire...

What would be your "Tomorrow's" prediction Sir?


What happened...not "happy" with your amps "liking"?

Please keep posting...it will keep "My Thread Rating" so High!

I would like to reach OVER the 1,000,000 responses ASAP...

Thanks!

Yes, I wrote thicker. Months ago, Mark made his motor with thicker wire and it ran hot. Then I asked him, "How would YOU fix it?" ... I already know the answer back then.

You can do better than that petty post.

Midaz

Come on, 1,000,000 views.. That nothing to brag about... I can see if it was 1,000,000 motors in people's hands or even watched on YouTube.LOL

BTW, How are you getting my original deleted or edited posts from months ago!? I noticed that a while back ago, too.
Are you hacking into this sight? Or just generating a wrong quote to make trouble? Either or is no good.

[Ufopolitics]

Please keep posting...it will keep "My Thread Rating" so High!

I would like to reach OVER the 1,000,000 responses ASAP...

Thanks!


Ufopolitics

[Ufopolitics]

I made the motor with 18awg that I had left over. It was just for testing. It's already disassembled and ready to be rebuilt.
It should be thinner wire. We know that already.

Tell us something new


Midaz

For my design you must use one or two wire gauges thicker than previously used or the amps will be too low for my liking..

You are so FULL of it...

18 awg is the PERFECT Gauge for this Motor.

"Yesterday" was a "MUST" to use Higher Gauge...and "Today" is much Thinner wire...

What would be your "Tomorrow's" prediction Sir?


What happened...not "happy" with your amps "liking"?

[Midaztouch]

Raul

The thing is, there is nothing special. It's pretty much straight forward.
Anyone can build it.

What is important is the brushes and extra brushes to collect the collapsing field.
That is Tesla's Gift. It works for every singular coil motor = A1MoGen.

It doesn't work every pair or group motor. For the ones that work, the performances is lower that of the singular coils.

Midaz

I share everything. RPMs on these motors without the torque is nothing.

[Midaztouch]

I made the prototype A1MoGen motor with 18awg that I had left over. It was just for testing. It's already disassembled and ready to be rebuilt.
It should be thinner wire. We know that already.

Tell us something new


Midaz

[Ufopolitics]

a1mOgEn

a1mOgEn quick "review":

The A1MoGen worked fine on a DC Power Supply. After I review the vid, I will put it up soon.

The "great Testing Video"...

[VIDEO]https://m.youtube.com/watch?v=xwcPckoSbtA[/VIDEO][/QUOTE]

The "poor" motor consumed over 20 AMPS AT NO LOAD NO MATTER what Voltage was applied...


Text copied from "The Designer's You Tube Channel":

Published on Apr 27, 2015

1.9volts @ 21amps... 40 watts starts RPMs. Start of vid
20Volts @ 21apms... 420 watts vid's peak RPMs at the end of vid

I invited DADHAV to our group because I got tired of the runaround. I needed a big boy to set thing straight. And he did his thing!

Dad's Hav opinion on video tests...

The DadHav Post's Title was: "What's up, Watts R Up"...

Richie, Do I understand what I saw? The power supply had an output setting of 2 volts with a maximum current limit of 40 amps. The monitor voltage of the running motor was 1.9 volts and was drawing over 20 amps with no load? Did you happen to notice the amp draw at 26 volts before you shut the power supply down? I'm just guessing but I wouldn't expect an OEM motor to draw less than 20 amps at it's full voltage specification if there was no load. I could be all wrong and I hope your up coming tests will prove it so.
John

Yes, definitively DadHav did "his thing right"!!...and with great class!

Hunting Ross opinion......

I think I'm the first and only to report on a build that I believe replicates your A1MG and found it to be a very efficient heater unit. Not strong and not particularly fast and a 'gas' guzzler, which your recent posts is starting to confirm.

Happy Hunting

mark

What a "Dream Machine"...

Yeah Man, a1mOgEn...best way to build a fast and reliable pulsating Heater Unit!

Oh!...forgot another great improvement from this awesome thing!!...

if you need to drain your batteries very fast...I mean, really fast, there is no need to buy an expensive 'balanced discharging unit'...just hook a1mOgEn to battery and voltage is gone in less than nano seconds!


Excellent work!


Congratulations!

Now you must realize why such HUGE Interest from the Japanese Chief Engineer that observed such tests...

Did you get to sell them your "Idea"?

[Midaztouch]

This is open Forum. Anyone can post and build

[IMG][/IMG]

Nice CAD Raul/Ufo but...

Can you ADD extra brushes to either designs to collect the collapsing field? I don't want to reduce the performance of the machine/magnetic drag.

In your opinion, is it possible to do what I'm saying? Because anything besides that would be a waste of time. Don't you agree!?

Midaz

As soon as P2 and P16 gets fully disconnected from Input, this coils would be in a kind of "limbo", where their previously oriented domains with North direction would get somehow in a 'loose status' just for nano seconds, then easily influenced by both South Stators Magnetic Fields...this would cause a Counter Orientation of the ferromagnetic comprehended core, which would be completely "compatible" with the natural collapsing field and Voltage polarity reversal.

We must realize that every time a ferromagnetic core approaches a magnetic field Pole, the field will "expand" and that specific Pole will take over that portion of the core under the inflluence.

IMO, at this early, primitive stage is too soon and too close to start collecting energy (by setting extra brushes), since it may create "Influence Conflicts" with the Coils being energized by direct input, since they are too close.

I recommend to set the Generator Brushes further away as possible from this 'conversion' stage, and as closer as possible before entering the next Input Cycle, this way we will 'suck out' all the reversed plus the induced energies, leaving a "Blank" clean Coil to receive next input, resulting in much less sparking.

However, all this are just assumptions based on magnetism and electrical behavior 'theories' as well as "not theories but reality", however, complex interactions requires that all of this must be tested/checked at different angles in order to determine which setting will deliver better performance and output.

Just my opinion.


Ufopolitics

It seems like the A1MoGen meets the requirements.

With the Singular Coils = A1MoGen, I believe that you can add extra brushes to collect the collapsing field... There is plenty of room to add the extra brush with no interface.

Look at the CAD. They fit and with with room to find that "Sweet Spot". Don't you think so!?

UFO

The only Chance we have to get maximum performance and extra brushes, is with the singular coils = A1MoGen.

It's seem to me that pair winds and group winds there is NO possibility of adding extra brushes to collect the collapsing field without hindering asymetric motors.

Not to waste anyone's time... shouldn't checking the extra brush and Singular Coils be the main/top priority!? Wouldn't you agree?


Midaz

Mark's half a motor, 1 commutator design, proves that you can add extra brushes. But when you add extra brushes to the Singular Coils = A1MoGen there is room to adjust them for Sweet Spot and maybe acceleration underload.

Mark, with your pair & group winds, I'm sure it created magnetic drag when you collect energy from the collapsing field to power a load with your design. Is that correct?... If you want to try for acceleration unload. Frist you shoud try 4poles Singular Coils = A1MoGen adjusting your gen brushes towards the repultion bisector. Then try the 5poles Singular Coils = A1MoGen


Keep it Clean and Green
Midaz

Don't forget to use thinner wire... More turns = more Torque

[Ufopolitics]

Anything else?

Midaz

Yes, disappear from here, get lost, go to your thread

[Ufopolitics]

Here is a drawing with both versions of the All North Five Poles, the AN-1 (Pairs) and the AN-2 (Single Coils).

[IMG][/IMG]

AN-1 & AN-2 CHARTS TOGETHER:

[IMG][/IMG]

The Higher RPM's from the AN-1 is understood as each motor actuating circuit (Pairs) comprehends Three (3) Poles, versus Single Coils which takes Two (2) Poles...here comes the Throw Out Angle difference that I have explained before.

Garry utilized the same amount of turns and same awg contained in the Pair, and duplicated into the Single Coil, as He did for all other replications, that is why there is no much amp draw difference between them when the sweet spot is found (green high light).

Here it would be very interesting to see the Torque difference or equal mechanical loads applied to both machines.

Ufopolitics

@Garry Childers:


Garry, could you do me a favor?

Could you just run for at least a steady half hour both -at no load- AN1 & AN2 while measuring heating on each of them?

Please have some damped cold towels handy when testing the A2 (Single Coils)

And please, let Us know the results.


Regards


Ufopolitics

[Midaztouch]

Just an opinion on the a1 mogEn...from Hunting Ross

Raul



Your trying to say the wire gauge was too thick. Every motor builder here knows it.
That why I asked Mark, " How would YOU fix the motor?" It was a simple fixable mistake.

Anything else?

Midaz

[Ufopolitics]

Originally Posted by Midaztouch View Post
Singular coils work for EVERY... Not some... but every!

Not so !

I built your single coil motor months ago and it remains the most power hungry space heater I have ever built in my short motor career...@ 7.0A @ 5v @ 1795 rpm 'no load'.

So I'm not surprised at your recent 'test' results indicating huge 'no load' power consumption.

Happy Hunting

mark

Just an opinion on the a1 mogEn...from Hunting Ross