My Asymmetric Electrodynamic Machines

[iankoglin]

Hello there Kogs!


Nice Testing Friend!


That Motor never imagined to go up to those speeds Uh?...

I like your steady amps draw, no matter how much voltage you increase at source.

One thing that We concluded from this testing...is that C1 & C2 (Series connected related to Output Coils) take most of the Higher Voltage charges, and we could see there over 200 V on each bank.

[IMG][/IMG]

Now, a second test, eliminating the Parallel connected C3 & C4 Banks...and just adding them in Parallel to the existing C1 & C2 Series connected between Output Coils,this connection would give Us another view of results Kogs.

Also splitting the Batteries into Two Side Banks to the Input side of Coils (L1, L3), and here realize that when we do this we are adding the Coils resistance in the circuit...so, easily you could add first 12V + 12V (one battery at each side), then 24V + 24V Banks...

Meters should go one on each side bank (Caps and Batteries) connected parallel to read Voltages, so Four Meters total, two for batteries, two for Caps.

Also, you could add a second Amp meter to read Caps Output current as well as Batteries Input...

EDIT 2: The way to do this Test is first turn ON S1, and read RPM's Motor reaches with just Batteries, while checking other parameters (V&A)...Then turn ON S2, and notice how RPM's drops...but slowly increasing, and the point here is to allow system to recover to previous Battery running RPM's and watch Caps V.

EDIT 3: We could also check by feeding Machine both ways (Batteries), (Parallel like Kogs have on Video and Series, like on this Diagram) while keeping Caps in Series to Coils/ Parallel between them (as Diagram above)...and watching which way is better feed for faster charging cap banks/faster reaching running RPM's.

Great work Kogs!!


Kind Regards


Ufopolitics

EDIT 1: We all could do this Test, even using N-S Systems...then get to see the differences between them.

I will be doing it with my N-S Imperial as well, since the UFO Kit I ordered for All North, is kind of behind because some delay with Commutators I believe, as Dyann was not sure...

@Kogs: Be careful IF using your new "Super Babies"...realize that when paralleling the Voltage will remain as one Cap...so it would be 2.7 V and you could damage them by over charging...the way to do this, is to make "Cells" in series til reaching operating voltages and then adding each Cell in Parallel between them.

G'day UFO
Please where do you want me to place the amp meters

https://www.dropbox.com/home/Motor%20Testing%20DRawings

I am setting up so as to do the test But am unsure where you want the Amp meters to be
I really appreciate all you are doing here

Kindest regards

[Ufopolitics]

Please Refresh Page...

@Glen,

Please, refresh page, as I have done some Editing on previous post. related to Comm Elements position, as this is VERY Important!...before you keep going.


Thank You


Ufopolitics

[Ufopolitics]

Hi Glen

That is a really new motor. What are you planning to do with it so I can understand the experiment please. Re-wind motor low torque and charging a battery?????

Re-wind motor to run free but runs slow?

Hello BroMikey,

What may you think it will run "slower"..?

I will try to answer your questions, if you allow me to.

This is multiple choice thinking as I wonder what's up with each experimenters viewpoint.

Ok, Glen has an Imperial Electric Motor, 33 poles, 66 commutator Elements, so called "P66 BODY".
I draw for him a method to convert it to Asymmetrical Wind based on the new concept of All North Rotor Groups configuration (Homo-polar Machines). Same concept I have been showing/developing on smaller replicas in my latest videos (all north five poles).
This means Rotor Coils always would be projecting outwards a North Pole (toward Stators) (North Pole is a guidance, but it could be "All South" as well)

Coils-Groups will orderly be Turned On then Off North during Motor Action. This way flux will travel -for all- in the same direction at all times. And, as they are overlapped with a common core, the transfer "from to" will not suffer much deviation in the "down hill curve" as it would be "inherited" from Group to next Group orderly.

Look at the Diagrams (I posted before) for Glen to wind His Machine below...

[IMG][/IMG]

[IMG][/IMG]

Re-wind motor to use as generator?

Re-wind motor to spike a battery for free while the motor runs 50-90 power level?

This Machines do a "50/50" Motor Generator...

[IMG][/IMG]

In that Diagram, Glen's Machine would be the bottom right "N-N Config on Four Stators"..

The Blue semi-circumferences would be Motor stage, while the Green would be Generator Stage, collected by the Output Brushes at that end.

Do you have batteries to charge in your coming experiment?

I am pretty sure He will...

We have a nearby rewind shop (just a few miles) and these guys will rewind a motor for me anyway I want them to. They gave me some 11awg magnet wire for a science project I did.

Thanks Glen for everything.

Mike

It would be great if you decide to go for one of this powerful machines Mikey!

Imperial has a "UFO Kit" for a P56, available for a very low price of $276.00 USD (Thanks to Machine Alive great work negotiating with Imperial Electric)...it contains all you need to assemble one unit...normally an Imperial P56 Symmetrical costs $698.00 USD...

It would be nice to understand each persons experimental goal as I watch from the side lines.

We all have same goals here...different machines...different windings...same results, which is to obtain a greater output while having a low amp draw motor that delivers high torque and high speed as mechanical attributes, all in one compact machine...

Glen Machine is unique, very powerful embodiment, and a newer technology in the windings that would run even smoother and with better output results than before we had here with the N-S Types.


Regards Mikey


Ufopolitics

[Ufopolitics]

P66 Update from Glen WV

Greetings all:

I have started winding my armature for the P66 motor.

First crack out of the box, I wound four strands then noticed the commutator had twice the number of segments as the rotor has slots. That means skipping one segment between winds instead of starting the wind 'next to' the one just completed.

Had to fix that.

Hello Glen,

I was waiting for your update!...it is great to hear again from you

Yes, your Motor is a 33 Poles/ 66 Commutator Elements, same as P56 is a 28 Poles/56 Comm Elements.

You DON'T jump each one of the Elements...leaving one not connected!...but, instead, you JOIN each Two Elements and attach Two to each Group wire, upper and bottom...that way we have a continuous contact On at all times.

Take a look at this Video...will give you many hints on the start.
I use a 16 gauge piece of "U" wire to make that fastening and to join each two elements together.

[IMG][/IMG]

It is VERY IMPORTANT that you assign the correct Two Commutator Elements for each Group!!.

For example, and as a MAIN GUIDE, look at Group 1 above on Left...and notice the corresponding Two Commutator Elements that are in RED(Red for positive Input Upper, as connecting shaft is pointing towards you, out of screen)...So, note that those Two Elements are EXACTLY at the end of Coil #6 LAST POLE...of Group 1

Now looking at your Stators positioning and Rotor, again, looking at Group 1 and Comm Elements in Red:

[IMG][/IMG]

Note Brush "M1" is JUST STARTING to make contact with the two elements that belong to G1...Then look at N1 and S1 Stators positioning related to G1...That is exactly when G1 should start getting fired/energized, according to Rotation R....And G2-which is ahead of G1- is "leaving contact" with Brush M1.

Then, I looked at Mr. UFOPolitics' drawing and recommendations again....

Oooopppsss, I was winding only on one side. So, stopped that and started on the opposite side to keep things balanced.

Its coming along nicely now.

Each coil gets 7 turns of #18 gauge wire. Each group consists of 6 coils for a total of 42 turns of wire. This may be one turn too many, but it is easier to make the coils shorter than longer......

Pics are here: P66 Motor Wind Photos by GlenWV | Photobucket

Comments and suggestions are welcome.

GlenWV

Seven (7) turns per each coil is great!...Just make sure you will have enough room at each slot for other Group-Coils that will overlap/cross that slot.

You will be fine with just 5-6 turns per coil, just in case you need to reduce to lesser turns.


Thanks for sharing your work!


Regards


Ufopolitics

[Matthew Jones]

It seems that Mathew jones has had the desired effect here, and started a ball rolling ( AGAIN ).

Please Guys don't let it knock over too many skittles.

Warm Regards Cornboy.

Thanks for noticing.

[BroMikey]

Motor (Nice)

Greetings all:

I have started winding my armature for the P66 motor.

First crack out of the box, I wound four strands then noticed the commutator had twice the number of segments as the rotor has slots. That means skipping one segment between winds instead of starting the wind 'next to' the one just completed.

Had to fix that.

Then, I looked at Mr. UFOPolitics' drawing and recommendations again....

Oooopppsss, I was winding only on one side. So, stopped that and started on the opposite side to keep things balanced.

Its coming along nicely now.

Each coil gets 7 turns of #18 gauge wire. Each group consists of 6 coils for a total of 42 turns of wire. This may be one turn too many, but it is easier to make the coils shorter than longer......

Pics are here: P66 Motor Wind Photos by GlenWV | Photobucket

Comments and suggestions are welcome.

GlenWV

Hi Glen

That is a really new motor. What are you planning to do with it so I can understand the experiment please. Re-wind motor low torque and charging a battery?????

Re-wind motor to run free but runs slow?

This is multiple choice thinking as I wonder what's up with each experimenters viewpoint.

Re-wind motor to use as generator?

Re-wind motor to spike a battery for free while the motor runs 50-90 power level?

Do you have batteries to charge in your coming experiment?

We have a nearby rewind shop (just a few miles) and these guys will rewind a motor for me anyway I want them to. They gave me some 11awg magnet wire for a science project I did.

It would be nice to understand each persons experimental goal as I watch from the side lines.

Thanks Glen for everything.

Mike

[GlenWV]

P66 Motor Wind

Greetings all:

I have started winding my armature for the P66 motor.

First crack out of the box, I wound four strands then noticed the commutator had twice the number of segments as the rotor has slots. That means skipping one segment between winds instead of starting the wind 'next to' the one just completed.

Had to fix that.

Then, I looked at Mr. UFOPolitics' drawing and recommendations again....

Oooopppsss, I was winding only on one side. So, stopped that and started on the opposite side to keep things balanced.

Its coming along nicely now.

Each coil gets 7 turns of #18 gauge wire. Each group consists of 6 coils for a total of 42 turns of wire. This may be one turn too many, but it is easier to make the coils shorter than longer......

Pics are here: P66 Motor Wind Photos by GlenWV | Photobucket

Comments and suggestions are welcome.

GlenWV

[Cornboy 555]

Sh-t

It seems that Mathew jones has had the desired effect here, and started a ball rolling ( AGAIN ).

Please Guys don't let it knock over too many skittles.

Warm Regards Cornboy.

[TheoriaApophasis]

IF anyone is not involved in replicating any of UFO's Projects Please do not Post here Make your own thread we do not want you here. You are only wasting your time as well as ours.

Dont assume people aren't. Ive been winding magnet wire coils now for days.
I am working on a motor of which , unlike the OP, I will give NO details on.
I have 2 investors who have made supply purchases for this motor and signed a NDA

Please keep your fingers crossed that I can "make it work".
I gave my book away, but am not giving away my motor until it both A: is done and working and B: I have a patent on same.
I think we are all on the "same page" Peace to you all.


.....and warm regards to the OP on his motor design and great contributions to energy extraction.

Pardon if I caused ANY disruptions.



Lux et Veritas

[Midaztouch]

the UFO Kit I ordered for All North, is kind of behind because some delay with Commutators I believe, as Dyann was not sure...

Let me place my bet now! I'm betting on, over 50 amps on the two outputs of the all north group windings @36volts.

UFO, do your thing!


Keep it Clean and Green
Midaz

Ps. Order your UFO Imperial Kits sooner than later

[iankoglin]

@ all those not replicating here

G'day All
This thread Started By UFO is called My Asymmetric Electrodynamic Machines

This thread encourages people to replicate or try to replicate the things that UFO has disclosed to us about what he has built and has or is in the process of trying to improve on what he has previously achieved.

This thread is NOT for other people to tell what he or she can do or not do or on theories on how to Improve what UFO has disclosed without being an active replicator nor is it for discussing what goes on in other threads.

If anyone is actually Replicating or trying to replicate what UFO is demonstrating here then they are really welcome to post here their achievements or problems in trying to do so.

In the last three pages of 63 posts you have to wade through 27 posts that are not related to this subject Some of which are from UFO himself. Even this post of mine makes it 28 Posts of just Rubbish that.

Every one involved in replicating here has looked over the posts meditated on what they have read then decided there maybe some merit to what UFO is disclosing and decided that they want to try and see for themselves if there really is any merit in what UFO is disclosing and therefore are welcome to have some input.

IF anyone is not involved in replicating any of UFO's Projects Please do not Post here Make your own thread we do not want you here. You are only wasting your time as well as ours.

Kindest Regards to all replicators and ones just perusing



Kogs sick of wading through the rubbish

[BroMikey]

Rules for breaking?

Hello there BroMikey,

Thanks, and yes, indeed there are many, many motors out there...and so, many, many ways to hook them up.

However, it is very unfortunate that a Member of this Forum, comes here -at this stage of the "game"- to claim that I have Plagiarized "his replication" of an existing "Tesla Switch" introduced in the 1800's...where I have shown -exactly- what it is all about...a whole bunch of batteries connected reversed polarity and using AC-DC diodes bridge to capture whatever left through a whole bunch of other diodes...that has ABSOLUTELY NADA in common related to my work here

I was attacked many times in the beginning of my first Thread here, it is "all on record"...back and forth, by same people, same old...and then on this Thread...many were bringing Motor Schematics back from the 1800's and dumping it on my lap...the Father whoever, the Alexander Patent, etc,etc...all this understood, because it is the beginning, when a "no name" in the "Art of the Trade" guy... "walks in"...and shows his work, and wants to share it for FREE...understanding, this "action" generates all kind of "bad feelings"...(let's not call them by their "REAL NAMES")....but now, this Member just feels like walking here and making all kind of FALSE ACCUSATIONS about MYSELF...as well as asking me to reveal my real name...along with all kind of racial insults, VIOLATING all this Forum Rules

But for "some reason" this guy can get away doing this...without nothing happening...and am NOT happy about it, at all.

If I mentioned your name above, BroMikey, it was because thanks to your comment I found what this guy was talking about..."my plagiarism"...but I HAVE NEVER , EVER visited that "Use of the Tesla Switch Thread"...til now.

It is very simple and EASY, to "walk in" a Thread and start accusing the owner, of all kind of FALSE ACCUSATIONS...Trying for others to DOUBT of the VERACITY of his work...However, WHAT IS NOT SUPPOSED TO BE, IS TO ALLOW THAT TO HAPPEN BY THE OWNERS OF THIS FORUMS WITHOUT ANY KIND OF DELETION, NOR REMOVAL, NOR BANNING HIS NAME.

He has said he is a "good donor" to this Forum...so then we are falling in the same exact CORRUPT SYSTEM we have out there...same crap!

Sorry about this rant, BroMikey, not meant to you, but you Quoted the whole thing over...so that triggered my "SPIC TEMPER" again


Cheers


Ufopolitics

No Problem UFO

I just went through the same thing last week on the "CAP DUMP" thread I made . here he comes with his hate and degrading right after he makes a comment that is suppose to help me.

I was going to say "I don't get it" but I am catching on. Same thing happened on that other forum adjacent to this one, a mod get's a hair up his nose and decides he can bully, antagonize, belittle and interrogate. Of course this guys picked a weekend when everyone was away then deletes me.

Of course for months nothing is said about the way the mod was violating their own rules. My statement is "I DON"T CARE" see but Aaron won't delete me here. I try to be kind and forgiving of these younger snot noses.

I use to be worse than a monster, UFO so it is easy for me to forgive.

I think the big thing here is that everyone wants to be loved and admired through the acknowledgement of their work and should be.

I have seen this so many times. One man working independently from the other on the same designs thinking they must have read the other ones mind or look on the other guys post to copy and paste.

I thought I invented the opto 20 years ago when I taped an led and the light sensor together in one package. then i find it had been in the works before I was born.

Either way a seasoned experimenter sees all of this and just laughs. It is like Larry, Curly and Moe. Also some folks want to be in the free energy tabloids.

The owners will put a stop to the bullying on this website and I love these guys because they are slow to anger giving everyone their opportunity to speak with and open heart.

When the hammer falls it ain't no fun cause we lose valuable participation.

You ain't the only one UFO go read the half deleted mess on the "CAP DUMP" thread. I just let it go because I know people will keep violating the rules and hang themselves.

Mikey PS gonna Be watching your progress

LOL Closed group HUH? Where did you read that. Your gonna get that mad because I told you Dave was polite? And of course I misread, "It all FUN.."

Thousands of people HUH? LOL

Stop your making my stomach hurt your just laughable. LOL

You might learn something one day if stop trying to know it all. All I wanted to do was help ya. Its your own hard head that stops that. Your failing yourself. Like I told you before I have Walmart chargers that work better than the crap you have put together. You have no clue, and anybody who has taken the time to look can see it.

Grow up Mikey, clean your house, its filthy. Be humble and listen to people who know more than you. All your doing is burning coal.

Matt

[Ufopolitics]

It is an Honor to have People like you here...Welcome!

Pesky humans (not meaning you) complicate things.

All energy is coupling off field perturbations.

There has NEVER been, and NEVER will be a single VOLT in the entire universe that was "had", or "created" or generated without using BOTH ends of the 'Ether fulcrum' , ...

that being spatial fields (divergent Ether perturbations) and counterspatial fields (centripetal, radial, CONvergent, inertial Ether 'points')



Define "free" energy? Any drunk moron can go place a small turbine hidden under a waterfall in the woods and get electrification.


If by "free energy" you mean getting "energy from no movement" (of ANY field(s)...), then NO, there is no such thing as free energy.


Can we PIERCE the Aether 'membrane' and get electrification without using fields or movements? NO, utterly impossible.


However human critters live in an ocean of fields compounded on fields upon fields......... so , some dumb humans THINK you can get same. But they're only ignoring moving fields and wrongly CLAIMING "free energy from nothing"


If you can stretch a wire into space I can 'do nothing' and get a charge, but its still all field movements. The issue obviously is easily tapping same.


However, can a smart person get "free energy" every &#*@ -where? YES.



They do it all the time in India, they string wires out the window and tap the power lines.

"here be FREE"

Hello and VERY Welcome here TheoriaApophasis!

You are like some huge, powerful bright and white light in the middle of a long Power & Light Company outage Darkness...

Completely agree with you.

If we are inside, deeply immersed within a Ocean of Water...how could we possibly measure any amount of water "specifications" within that massive ocean?...completely impossible.

Our Planet is full of Free Energy...everywhere we look at it...and we are just morons, ignorant like cave men...that have not been able to tap it...plus all the seizing of the ones who did it...and still...a cave man tells the other next to him...that it is not possible to communicate through an I Phone 5S at a remote distance...

Kind regards and great, excellent work on your FREE Book!!


Ufopolitics

[TheoriaApophasis]

Pesky humans (not meaning you) complicate things.

All energy is coupling off field perturbations.

There has NEVER been, and NEVER will be a single VOLT in the entire universe that was "had", or "created" or generated without using BOTH ends of the 'Ether fulcrum' , ...

that being spatial fields (divergent Ether perturbations) and counterspatial fields (centripetal, radial, CONvergent, inertial Ether 'points')



Define "free" energy? Any drunk moron can go place a small turbine hidden under a waterfall in the woods and get electrification.


If by "free energy" you mean getting "energy from no movement" (of ANY field(s)...), then NO, there is no such thing as free energy.


Can we PIERCE the Aether 'membrane' and get electrification without using fields or movements? NO, utterly impossible.


However human critters live in an ocean of fields compounded on fields upon fields......... so , some dumb humans THINK you can get same. But they're only ignoring moving fields and wrongly CLAIMING "free energy from nothing"


If you can stretch a wire into space I can 'do nothing' and get a charge, but its still all field movements. The issue obviously is easily tapping same.


However, can a smart person get "free energy" every &#*@ -where? YES.



They do it all the time in India, they string wires out the window and tap the power lines.

"here be FREE"

[dR-Green]

If You use (Input) 2000 W and you get out 4000 W...Aren't those "extra" 2000 Watts FREE?...Just like buying a Pair of Shoes and getting another pair, same type for "FREE" in a "Clearance Sale"... ?

As we have seen, meters and such can be deceptive and people are not taking fundamentals into consideration so are not doing measurements properly or in a convincing way. If your house meter shows 2000W load but you are measuring 4000W worth of heat output then it would appear to be free, and assuming the meter will measure your cooker load just the same as it would normally, then 4000W worth of heat output would be pretty hard to argue against.

If the second pair of shoes simply look the same but are made out of paper rather than leather then they will fall apart when you try to use them. They are the same type after all, no one ever mentioned what the materials were.

On another end, dR-Green...I really don't know where is your real "GREEN SIDE"...cause every time you make your "entering", your "sudden entry", unexpected... into a thread...is to create this EXACT Doubts...over and over, and over...to the point of becoming very annoying.

<Written and posted from a computer powered by free energy.>

Sorry, but I ain't in a good mood friend to stand any more crap...it is starting to stink...so yes, not a good timing , not a good moment to "walk in"...

I'm not trying to give you crap. I simply asked Mike where is the free energy. Where is the free energy ANYWHERE in those so-called "free energy" pdfs, they simply waste people's time because they are compiled by people who have no comprehension and no research on any of the devices, just a bundle of google search results spreading/promoting all kinds of useless (dis)information. Most of the people don't currently have free energy because they're too distracted by the more appealing fictional devices. The energy corporations who sell the energy to people who do useless experiments love it! More free energy promotion please!

It's also a fact that a lot of the "strange" behaviour that people see is not strange at all, unusual in terms of being commonly seen by Joe Sixpack perhaps, but it's certainly not magic. Maybe it's unfortunate that it's come up in your thread that's all.