Slayer Exciter Specs?

[Nick_Z]

Although a low current circuit is nice for an "Infinity Light" type of set up, the important thing is to make some real useable amount of light.
I will try Slayers newest two transistor circuit, soon. I don't have any 2n2222 transistors anymore, they are really the best for this purpose, other transistors will work, but not as well.
Slayer has come up with some of the most economical circuits so far, that output the most amount of light. His big Exciter coil is really where the gain comes from. To light a 2 watt gutted Ac Led bulbs to full brightness on less than 30mAs is pretty amazing. Especially when using the single AA battery.
My point is to obtain useable light, but not only from small batteries, but also from solar panels joined in series at 12, 24, or 36 volts. Although current levels are much more important than voltage levels.
The Lasersaber type of E-core transformer, or similar coil circuit that was made by Slayer is not spewing RF all over the place. Nor do the circuits that are "closed circuits", with their secondary coils not being open ended.
I don't think that having high voltage open ended Exciter circuits in ones house, is the best way to go.

[slayer007]

Sorry people but this is why I will not be showing any more of my circuits on line.

TeslaTronix- Tesla Power For The Masses by TeslaTronix — Kickstarter

He is selling the slayer exciters, kits, and also selling my circuit diagrams.

I tried to get kickstarter to stop the project but no emails from them yet.

I tried to talk to TeslaTronix many times. His response was to F off.

[Joit]

I would report him and comment all his Videos that he has stolen your work and try to sell it.

[slayer007]

I did report him to kickstarter. And showed them a link to my video were I showed the circuit that was dated, signed, witnessed and used Slayer as my trade mark.
In the video you can hear me say this is for private use only not to be sold for profit or gain.

I have also left comments and so has one of my subscribers but comments are just deleted.

[citfta]

Reported also.

Hi slayer,

I just joined Kickstarter so I could complain about Teslatronics too. I told them I had followed your work for the last few years and knew you had designed that circuit first. I haven't gotten a response yet.

Maybe if Aaron would also complain that would carry more weight as he is the moderator of this forum. I know of at least 2 other people from this forum the same thing has happened to.

Good luck,
Carroll

[slayer007]

Hi slayer,

I just joined Kickstarter so I could complain about Teslatronics too. I told them I had followed your work for the last few years and knew you had designed that circuit first. I haven't gotten a response yet.

Maybe if Aaron would also complain that would carry more weight as he is the moderator of this forum. I know of at least 2 other people from this forum the same thing has happened to.

Good luck,
Carroll

Thank you guys this is very much appreciated. Maybe if enought people do complain they will finaly do something about this.

Thank you.

[Slider2732]

He's pushing nearly $12,000 in pledges

Don't worry Slayer, we all know who's circuit that is and, even though you have given it away freely for personal use, that clause is well known.
This is Plagiarism.

I too am stepping back some. Documented ideas and circuits are not given credit where credit is due. Not only my stuff of course or that would be my own insecurity, but that of others too.
Perhaps TeslaTronix didn't realise where you said it should be for personal use.
But - the phrase "loosly based off a slayer exciter circuit variant" is the key. He even admits it was your circuit and then vagues it out as though inconsequential.
Had he designed his own there would hardly be the same problem.
I have a feeling, based on my own experiences that nothing will be done.

Ya know, I don't like Kickstarter one bit after my experience with them.
There's something not ringing true with their setup. A project for my Garden Lights was rejected, I appealed and asked why (such that any corrections may be made) and got no answer.
They like completely finished professional devices, that only need advertising (the superb PengPod for example), or, random things that seemingly only they know why they like them.
They have you join Amazon with a business account, detail all about your idea, write up the Pledges, shoot a video etc and all of that takes around a week, especially for the Amazon account. Then, Reject and give no reason why.
I did call the project 'Free Energy Garden Lights' and we all know the problem there, but could they show how the energy from soil is not free ? no solar, no batteries. The things run from water or even when held in the hand (especially the MK1 circuit, which i'll be going back to because it's more efficient).
But, in my case, I also don't have Twitter or Facebook and some people are very strange about you not giving away everything of your life.

My experience doesn't matter - your experience does - to a lot of us.
Should a guy make a buck off something he can do well ? sure.
But not when personal use only is well known and right there pointed out to Kickstarter by the actual designer !

[Aaron]

@Slayer

Slayer, pm me, I'll try to help.

[boguslaw]

Hmm....... is that really so easy to get money using kickstarter ? Not good if somebody is not giving the credit to the inventor , however what did you expected ? this world is going down....

I wonder what someone could get for self-running circuit

[b_rads]

What a shame

@slayer;
For those of us who have only been participating in the last couple of years, months, or days – the Slayer Exciter is as famous as the Bedini SSG, or the Big Clive Joule Thief. It is so unfortunate when the money grab starts and the originators and innovators sour and turn off the show. For a lot of us replicators, you guys are our heroes and open our minds to the great many possibilities within each of us. 3 years ago, I would not have dreamed that I could make a Joule Thief, a Slider Blocking Oscillator, a Lidmotor Penny Circuit, or many of the other things I have already built. The Slayer Exciter is a definite on my to do list as well.

I have to admit though; $12,000 in 10 days is pretty impressive and speaks more to what you have done than the person attempting to peddle your build. I hope those who plagiarize for profit make tremendous profits to find later down the road that those profits would have to be given back to the originator of the product. Unlikely that will happen but you know the saying “What goes around – comes around”, and possibly that will be the case for you.

Thank you for all you have given us and hope that you will reconsider and continue to share in the future.
Brad S

[Nick_Z]

@ Slayer:
Although it may be impossible to stop this kind of action, once someone posts a circuit or shows a video on youtube.
Rest assured that we that have been following your work for a while now, acknowledge the source of this work. YOU!
Please, don't let this stop you from continuing to show your amazing circuits. There is still much to learn... and open source is all we have to draw from, for now.
Thanks for all that you've done.
Nick_Z

[totoalas]

Slayer
Sad to hear on your decision
been a mentor friend and and guru to me
my electronic s enthusiam was powered by you
MY 20 plus coils are all ready still waiting for each new one that you make

Ive built my thread name on your builds with positive results

totoalas
Ive just spread the news on in the IAEC and OU so everyone knows who Mighty Slayer is

[totoalas]

Slayermatics

There will always be a slayer imprinted on my builds and will be better and best as always
ok builders show off your new builds with Slayer
this week end I will use the Slayer in my Energy Amplification Pt 2 In / Out going Up YT totoalas in tribute to Gbluer

totoalas

[SkyWatcher]

Hi folks, Hi slayer, let us try and put a little more perspective upon this scenario.
First, no one can control another, one can only truly control themselves.
Second, if one shares kindness, one does not stop sharing kindness just because another does not share this kindness as well, to stop sharing that kindness would show a disingenous kindness to begin with, or a kindness based upon conditions for the offering of that kindness.
Third, it is our feeling, that to truly share, is to truly share freely, without conditions.
peace love light

[slayer007]

Sorry Guys I did get a little carried away.
But I see this as just a scammer, Charging $15 for diagrams that are on the internet for free. And charging $325 for an exciter when it should cost under $25 to make.