Colman Beta Decay, New Energy Source

[stivep]

EVERYTHING BELOW IS DONE FOR FREE ENERGY experiments:




SPECTROSCOPY/ NUCLEAR/ PART#2 :X-ray https://www.youtube.com/watch?v=CQ3gPFfgDp8


All one need to know to understand science of radiation in respect to Colman FE, Andrea Rossi LENR, and mechanisms of nature. DIY is always easier for me when help comes from scientific community in easy to swallow form.That is what I provide to my Colleagues in science and that is what they provides for me:


parts of video in time frame:


- time 00:00 easy introduction to identification of periodic table elements in anything you have around.Explanation of device.
How much gold is in your ring,(how much gold is in GOLD?

- time 03:37 Basic theory and how the measurement is created.( easy, but not for idiots, -directed to strongly motivated viewers)


- time 09:30 How big specimen can I measure? ( solids, liquids, powders)


- time 10:51 Calibration( that is to be applied to any spectroscopy- alpha, beta , gamma, x-ray) by comparing to calibrating fixture -( just a piece of material that has known elements of known values)


- time 17:50 Can we place the sample now? (.......granules of Gold in plastic bag)


- time from 20:57 to 23:48 It does not always pay to educate someone you trying to convince to give it you. I almost lost it...........gushhhhhh but............... he is a good man..........


- time 24:13 My first measurements and crushes.... nice chunk of gold under scrutiny,


-34:30 some reflections ......


Wesley

[stivep]

SPECTROSCOPY/ NUCLEAR/ PART#1 :https://www.youtube.com/watch?v=k2PJVIkyW5Y


more of explanation in: part#2 look at link from above post

Wesley

[RAMSET]

Nothing but grattitude

Wesley
I also have shared your Post here [actually for quite some time ]

Colman_Gillespie Device

thanks for all you do to help this community and this world.

I would love to buy you a nice Steak dinner some day!

Chet

[mikrovolt]

The post here informs the forum readers that Stivep's work on the Colman
energy source shows that while fissionable elements have isotopes other elements may have value in energy conversion and can undergo transmutation in the process.

The Colman reaction gives off a secondary emission and a modest yield of energy. The power density is less than U238 however the safety implications show promise. The technology would require some level of control. This means a long debate between nukes and open source. Cost effectiveness versus safety, also the benefit of the determination of energy science to be open. This requires a strong communicator and effective demonstration of viable power.

The advancement of materials science will benefit. Those schooled can
learn moral ethics and later understand that elite entities control employment.

The winners of Linux Technology are few and many sacrificed their time.
Having an operating system open sourced allowed design outside proprietary control. The science of energy also has freedom to team up and grow.
Energy open source is logical because we need to advance.

The internet is an immense library and people exchange what they read
and a few put it to use. The discussion has merit if the right parties can organize efforts come into mutual agreement.

The introduction of the Terranova NMR coil may be useful in other various energy schemes. Thankyou for sharing.

[stivep]

https://www.youtube.com/watch?v=1BNgo09N0yM

Wesley

[stivep]

Wesley Translate's Akula video #16: Akula's TPU part 5



https://www.youtube.com/watch?v=Lpx1...ature=youtu.be






Wesley
Modify message

[JohnnBlade]

Hi Wesley,

I tried to do yr ferrite experiment, it worked, but the coils use a bit more amps since they are so short. I did manage to get my bulb runnjng a bit, with only using 1 signal gen, untill i burned out my 555 timer. But it is good enough for me to test all parts, as i have everything ready to do yr tests.

( why was the project stopped? Cause of a bit of radiation? Or weird feelings while busy testing? )

And thnx for all yr effort into translating movies for us, i appreciate it!

Greets JB

Wesley Translate's Akula video #16: Akula's TPU part 5



https://www.youtube.com/watch?v=Lpx1...ature=youtu.be






Wesley
Modify message

[stivep]

https://www.youtube.com/watch?v=0hVM...ature=youtu.be


Wesleys News video#1 of Ruslan Kalabuhov Free Energy




Wesley

[stivep]

Hi Wesley,

I tried to do yr ferrite experiment, it worked, but the coils use a bit more amps since they are so short. I did manage to get my bulb runnjng a bit, with only using 1 signal gen, untill i burned out my 555 timer. But it is good enough for me to test all parts, as i have everything ready to do yr tests.

( why was the project stopped? Cause of a bit of radiation? Or weird feelings while busy testing? )

And thnx for all yr effort into translating movies for us, i appreciate it!

Greets JB

Thank you my friend
for your comment
I'm on go and I just got a time to write few words.
The best guy to ask questions is Arunas as originally he was the most advanced one . He might also have more time than I have now.

[stivep]

https://www.youtube.com/watch?v=mG_FsBn2qxk


Wesleys News Overunity com presents :
Free Energy Device - Akula 1 KWatt Unit - no fuel needed


Wesley

[stivep]

I have made translation of part nr 1 but I can not post it as That russian side was banning others for using their video.
I will write letter to them .



Validation:
This is extremely valuable material




lets start from this one:
http://hopegirl2012.files.wordpress....al-3-25-14.pdf


https://www.youtube.com/watch?v=CMTD3pHj9Ck
this one was already posted by me does not give you much.
Free Energy Live In Action! This Is Breathtaking As Science Is Being Re-Written | Collective-Evolution



Чудеса свободной энергии. Часть 1
https://www.youtube.com/watch?v=PWjVaORKlfA


shows device
2 transformers one working as transformer and another as choke


120V from transformer connected to power cord and from power cord to motor,
Bank of capacitors where only one of them is connected as 3rd phase angle simulator.
Rest of them are connected in parallel or in series to three legs of wingdings
He mentioned three-angle connetion but in video #2 he shows schematic in star configuration.










Чудеса свободной энергии. Часть 2
https://www.youtube.com/watch?v=tn9un_9a8ag


schematic, how to play with windings and capacitors
by series and parallel capacitor connection



Чудеса свободной энергии. Часть 3
https://www.youtube.com/watch?v=l4X4zKZ4udI


Very much about how to play with windings


Чудеса свободной энергии. Часть 4 2
как просто, не имея достаточных знаний, построить мощный генератор - двигатель на магнитах. Автор А. Седой. чудеса свободной энергии часть 4 2 продолжение - YouTube

Magnetic motor


Чудеса свободной энергии часть 5 строим двигатель
как просто и быстро построить двигатель на магнитах.
А.Седой Чудеса свободной энергии часть 5 строим двигатель - YouTube

Magnetic motor




summary:
TK started from HHO than motor than electrostatic generator than hydroelectric geherator Презентация 2005
A Siedoj started from HHO than motor than magnetic motor
Stanley Mayer started from HHO


Palladium Magnetic Generator by Platinum Invests, May 20142 motor / magnetic motor
https://www.youtube.com/watch?v=2M89QnJaPY8&app=desktop


Final note:
This set of videos was created somewhere about 2011 posted at 2012.
Now we have number of russian and other nations showing us some of their devices with 2 motors.






pictures are at

Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze









Wesley

[stivep]

https://www.youtube.com/watch?v=Knq_...ature=youtu.be


Some more of secrets of Vasmus Free Energy Device part #9.
Free Energy is the energy that is Free of charge but energy must come from somewhere and be converted to usable form of energy


at minute 5:46 :
please note that 0.44 A current is clearly showing that voltage must be high on the tungsten light bulbs. Total power written in the light-bulbs divided at 0.44A gives you voltage.


at minute 5:17 :
Vasmus is increasing current on the ground wire using potentiometer.
That clearly states about push- pull electron pump mechanism with time delay.
The inertia of the mass particles electrons once activated has its own free flow mass delay.
Once activated electrons flow ( move) from the ground and loosely coupled coil of load winding ( big coil) is dissipating that energy at "pull' interaction not allowing mass to stop as next demand for electrons flow is just continuation of inertia.
The low frequency carrier is modulated with high frequency picks at very top of the amplitude presenting as DC of given with.
The amplitude of that square pics is much bigger as low amplitude carrier.

Modulation:
You could picture it as very narrow very high square picks of DC at frequency higher that the carrier.
The rising edge and falling edge of such impulse is very short however for us the important is that in the sloping down time there is at certain point the carrier of its very unique time base amplitude level.
The picks are present only - from 0 to maximum of the carrier.

That is very much like Lithuania Experiment.





Wesley

[stivep]

As Colman is involved in this discussion.
I can say that I'm on it, very much.
The steps that have been taken are not to advance in publications of ready to use device but to find fundamental principals behind .
That made me to get access to very sophisticated lab in area of particles and particles properties- easy to be translated as measuring nuclear processes of the matter.
The equipment is very much exotic and not easy to find.
Thanks to scientists around I got a grip on it.

I state that device is 100% legitimate as described in patent.



for your curiosity I'm posting today Video#2 of Ruslan.
It is electrostatic concept that has nothing in common to Colman.
At the end it is important to Have it in your house and in your car.
for the end user it isd good as long as it works
https://www.youtube.com/watch?v=r-9MqTGywdI

Wesley


Wesley

[stivep]

https://www.youtube.com/watch?v=bJWxJsaxNvE

Wesley

[genessc]

Thinking to try and build the gillespie cell... any recommendations?

Ordered powdered cobalt, red phosphorus, cadmium all around 300mesh.

Also the zinc and copper powders at about the same 300mesh.

The quartz tube I have on order is 8mm ID, 12mm OD.

Thats about all I've ordered so far, have a driver that I'll prolly try and use to get the 300mhz RF on the cell once its setup.

Looks like given the patent that the test cell was 45mm long and 14 of the triplets were fit into that length making each single layer about 1mm thick, and each triplet roughly 3mm thick...

I also have various b&w coils kicking around to use as needed.

Willing to try and replicate this work, let me know if there is interest. I have a mazur prm9000 but I think its gone bad due my kvdc work. Might have to buy another of those at 600 a pop to be able to see if any radioactivity evolves after the RF soaking of the cell.

Cheers,
Gene