Free energy already exist

[SkyWatcher]

Hi folks, hi ewizard, very wise words,

I think it's partly that so many things have come and gone that did not work out that people turn negative because they are clinging to past bad experiences and don't want their hopes crushed once again. I've learned to try to stay "in the moment" and look at each situation as a new and individual and not related to any past experiences.

Our power is within the present, that is why it is also considered a gift (present).
This present moment is how we can all create unity and then no manipulating influences can try to separate us, to attempt to dominate us by the old divide and conquer method.
Fear energies reside in the past and the future, both of which, do not exist.
Let us all come together and unite, in the present moment, forever and we will create paradise forever, like it was before.
peace love light
tyson

[Ruphus]

I still call B.S.

@inventionmaster

If the first try was a failure just say so, you would get more respect from me at least. We have all ate humble pie at some point.

Please prove my instincts incorrect here and continue to work on your projects.

Good luck!

[Ein~+ein]

I have repeatedly stated that I will not asked for money to complete this alpha FE project so there is nothing to scam.

Perhaps not, but are you not aware of just how big the FE Scam industry is? It's got to be in the 100s of millions globally. Did you read the link to Explosion at California water fuel research company kills inventor that Silver2Gold cautioned you about? It alone netted $7 million from unsuspecting investors.

I'm sure you'd have at least collected enough for that 'cosmetic makeover', 'a wattage meter and cool looking switches'. You've repeatedly told us you have very little money and now you suddenly have the funds to scrap what you initially claimed works to build something better. Did Skywatcher and ewizard send you a few hundred out of sympathy?

[AllPhase]

Looking at the BELT on the Engine-Generator FLYWHEEL, it looks like he is trying to spin it with an Electric Motor.

UNFORTUNATELY, the internal FRICTION of the Crankshaft, Pistons, Rings, Crankshaft Bearings, Camshaft Lobes raising the Valves, etc, will be ADDING a Great Deal of INEFFICIENT DRAG on the entire assembly.

Doesn't look too efficient to me.




.

[citfta]

HI AllPhase,

I think he has actually taken the piston out as best I can tell from the picture. It also looks like he has taken one of the valves out but it looks like the other one is still there. I am pretty sure the camshaft is still there as it doesn't look like he had the crankcase apart. I really believe the piston and rod are out because he said it is shaking really badly which it would if the piston was gone but the counterweights on the crankshaft are still there.

What amazes me is his insistence he is a genius when it comes to mechanical things but he can't even take the engine off the generator and connect it properly to a pulley or flywheel and pulley if he thinks he needs the flywheel. Also anyone that knows anything about mechanical things would realize the belt probably won't last 10 minutes trying to turn a load like that. Vbelts have a vee on them for a reason. Trying to drive a load on the flat of a vbelt will eat it up in a very short time. Even the serpentine belt like he is using has several small vees that need to ride in the grooves of the serpentine pulley.

Respectfully, Carroll

[Turion]

This guy comes on here and takes the name InventionMASTER, is only in his 20's (don't get me wrong...there are some exceptional individuals in their 20's, but that is a piece of it) and claims to have solved the problem people have been busting their butts to solve. He claims it is "simple" and then refuses to share his "simple" solution. Why come on here at all unless it is to yank our chains?

Again I ask: InventionMASTER, do you or do you not have a working machine that puts out more power than it takes to run, or is this just your "theory"???

Dave Bowling

P.S. PM me with your location and I will be happy to come and video a WORKING machine and you can disguise it any way you want so I can't see what is inside. Then I can post the video and put an end to the discussion as to whether or not you are for real. As many people on the forums know, I am in San Jose, CA.

[ewizard]

Hi folks, hi ewizard, very wise words,

Our power is within the present, that is why it is also considered a gift (present).
This present moment is how we can all create unity and then no manipulating influences can try to separate us, to attempt to dominate us by the old divide and conquer method.
Fear energies reside in the past and the future, both of which, do not exist.
Let us all come together and unite, in the present moment, forever and we will create paradise forever, like it was before.
peace love light
tyson

I think we have some of the same background and have very probably studied some of the same things

[inventionmaster]

If the first try was a failure just say so,

This particular project has not been proven to be a failure. The only difficult challenge I come across is obtaining the material and tools I need in order to fully complete it.

[inventionmaster]

I'm sure you'd have at least collected enough for that 'cosmetic makeover', 'a wattage meter and cool looking switches'. You've repeatedly told us you have very little money and now you suddenly have the funds to scrap what you initially claimed works to build something better. Did Skywatcher and ewizard send you a few hundred out of sympathy?

Unfortunately I don't have and probably will never have the funds for a full cosmetic makeover

However once I have the improved design up and running I might have an easier time saving for it (I hope).

BTW
I don't magically suddenly have funds for this project. There are sacrifices I make an order to do these projects.

[inventionmaster]

Looking at the BELT on the Engine-Generator FLYWHEEL, it looks like he is trying to spin it with an Electric Motor.

UNFORTUNATELY, the internal FRICTION of the Crankshaft, Pistons, Rings, Crankshaft Bearings, Camshaft Lobes raising the Valves, etc, will be ADDING a Great Deal of INEFFICIENT DRAG on the entire assembly.

Doesn't look too efficient to me.




.

After gutting most of the internal engine parts I managed to get rid of most of the drag and it spins quite well

Personal thoughts ("I do love to watch it spin. Cant believe the sound of a spinning motor without the timed explosions to make it spin, sounds different and interesting")

[inventionmaster]

What amazes me is his insistence he is a genius when it comes to mechanical things but he can't even take the engine off the generator and connect it properly to a pulley or flywheel and pulley if he thinks he needs the flywheel. Also anyone that knows anything about mechanical things would realize the belt probably won't last 10 minutes trying to turn a load like that. Vbelts have a vee on them for a reason. Trying to drive a load on the flat of a vbelt will eat it up in a very short time. Even the serpentine belt like he is using has several small vees that need to ride in the grooves of the serpentine pulley.

Respectfully, Carroll

First off since I'm kind of poor I can't afford all of the proper tools and equipment to do what I'm doing so I'm forced to come up with different ways to make my project work mostly with what I already have. Scraping up enough money to get even the most simplest supplies and tools I need is not easy.

BTW I hate using the flywheel and I know that I don't need it but until I can get something better I have to make do with what I got. I've had it running for about more than 15 minutes before the belt flies off, goes airborne, and almost makes it into a neighbors yard ("I'm glad it has not hit me in the face when it flies off). I'm forced to be more creative with making small ridges underneath the tape on the flywheel to that it can stay on. I did however manage to obtain a normal pulley for the force that is spinning the motor and that at least helps the belt to stay on the flywheel (which has small ridges under the tape). A day might come to where I can get all of the proper things I need once I'm able to prove everything (I hope).

[inventionmaster]

Again I ask: InventionMASTER, do you or do you not have a working machine that puts out more power than it takes to run, or is this just your "theory"???

Dave Bowling

P.S. PM me with your location and I will be happy to come and video a WORKING machine and you can disguise it any way you want so I can't see what is inside. Then I can post the video and put an end to the discussion as to whether or not you are for real. As many people on the forums know, I am in San Jose, CA.

Answer to first question is yes. It does indeed put out more power than it takes to run. The problem I'm having now is like a bad capacitor or something within the circuitry. Since my main goal is getting off the grid and living on 100% free energy I cannot use this machine simply because it does not put out enough power to power the entire house (and still more noisy than I would like). That is why I'm building this more efficient design that almost works the same way. This new design will make it possible to power the entire home off free energy as it will be far more efficient (which I'm getting tired of saying).

After I complete my new and much more efficient design I may finish and open source the first one (with this old motor).

After I have completed my new super efficient design (compared to the first one) sure you will be more than welcome to make a film of it.

I've never made an Internet video before and neither have I ever posted on Youtube but I normally learn how to do just about anything pretty quick. There are however a few more components I need in order to make the first design perfect (regulator and new control panel with circuit board). A brand new 4000 watt generator in tip top condition would solve all my issues also

[inventionmaster]

BTW the larger flywheel I'm using (first design) provides the advantage of a large spinning force and makes it harder for the generator to slow down while under heavier loads

[Turion]

Inventionmaster,
If you are under the impression that you will be able to patent your device and make large sums of money, please read on. If you come up with the funding to obtain a patent in the first place, you are then required by law to defend that patent in the courts against anyone who brings suit claiming that ANY part of your device is an infringement on a previous patent owned by them. This could amount to DOZENS of lawsuits by large corporations who have bought up patents and stored them on the shelves for this expressed purpose. The minute you are unable to afford to defend the patent in court, you lose it. Period.

Your only realistic hope is to sell your invention outright to someone who has pockets deep enough to deal with these lawsuits. Investors are NOT the answer. My wife works in intellectual property law and this is HER advice, speaking from experience. The Sillicon Valley in California is a place where intellectual property law is a MAJOR issue.

Open source it man, before it is taken from you. Become famous as the person who changed the world. That is really your best course. Make your money doing interviews and tv appearances. Lecture tours, and all that kind of thing.

Dave Bowling

[Ufopolitics]

Yeah do that...

BTW the larger flywheel I'm using (first design) provides the advantage of a large spinning force and makes it harder for the generator to slow down while under heavier loads

Yes Inventionmaster...do that...Open Source it...then become famous...and attend TV Shows/Conferences...become a "Celebrity"...someone really famous...


just like Me...





Regards


Ufopolitics