Announcement

Collapse
No announcement yet.

Here's looking at Euclid (Bogart)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Q-Mo-Gen

    I became rather ashamed of my own actions on this thread particularly as I promised a 'hell of a ride' and most have followed . I seem to have got held up in a lay by for a while and I guess that need explaining a little bit . As you'll notice a little while back MJN talked a little about intimidation some of you may not know but in the late 1970s Mike was one of a group that advanced water splitting technology and eventually ran a ram jet test bed engine .. the efforts where suppressed .A few years ago Mike quite bravely tried to release the bulk of that information on this forum. In fairness To Mike he did warn me of Intimidation of course in my inthusiasum to try the concept I didn't really believe him … Bad mistake !!! These are not nice people . The nay sayers on this forum are opposition as are the people who simply can't get out of the groove of power in and power out It simply does not apply and those who insist it doe's are a huge part of the problem . The actual act of trying to measure the power in power out ratio usually destroys the COP>1 advantage.
    The very act of adding instruments closes the dipole.
    If that wasn't the case the likes of John Bedini or E.P.D would have walked off with the 1 million or ten Million or whatever the bull **** is now .. and thank you very much sir !

    1 watt challenge.wmv - YouTube

    any way I digress I didn't like intimidation when it happened . My car vandalised was enough to seriously balls my life up despite all my bravado . Now this power in / power out stuff . Is these same guys .. Its their mantra if I get a bit prickly and paranoid now and again Its because I've had dealings.
    Here is how it really is .. one of the few things that Albert said that was true before he became a major part of the disinformation conspiracy himself is this maxim known by every ten year old
    “Energy cannot be created or destroyed, it can only be changed from one form to another.”
    If that's accepted as right (and it is) then there is just as much energy in our universe today as there was one million years ago not a penny weight more or less . One of these nit wits trying to measure things that are being transformed into something they are to stupid to understand with instruments that can't see it,... are just a perpetual nuisance value , IMHO these oxygen thieves should be thrown off alternative energy forums , They are quite frankly a distraction they either do not believe or they are opposition in my opinion if they don't believe it can be done then out of simple respect they should be taken away from the people who are actually doing it !
    The real reason I stopped posting on this thread is as I explained at the outset all of this so called “free energy” comes from a common source , It was a sweeping statement but no less true for that ! At one point In this thread I was asked (quite reasonably I guess) to describe how the Chas Campbell machines work

    Chas Campbell Free Energy Generator - YouTube

    I tried to ignore that question not because I don't know and cant relate it, but because at that time I considered doing so was a serious risk to my well being . Going into the technicalities of this machine and its ilk exposes every nuance of what tptb are putting their efforts into hiding.
    To put it bluntly I chickened out, (And I might again) still things have changed a little bit in my favour first is the fact that there is something of a revolution going on (although you may not be aware of it) In many impoverished countries the very poor have managed to master the application of this technology, They perhaps don't fully understand it but that's irrelevant for these people a power source is life and death and hundreds of these machines are being produced in one form or another. This basically means as far as the energy strangle hold and tptb are concerned .. THE JIGS UP . Here's many examples of builds going on right now .. which of course is
    only a fraction of a percent of the activity

    Directory:Motor-Generator Self-Looped with Usable Energy Left Over - PESWiki

    Added to this two members of this forum who I have the greatest respect for are building the device that is Boguslaw and Jetijs both of which have been a great help to me in the past and I feel I want to contribute by explaining from A to Z how these machines work,where the energy comes from and how its transformed.
    So I don't have to banish the power in / power out guys who are just stupid (and not opposition) I'll make it clear right now I intend to demonstrate a stand alone system that requires no visible input you would understand and yet provide many Kws of power.
    Although this may seem to you to be a 'Mechanical' system it is not . It is electrical and indeed extremely High frequency RF at that . You'll see that the tendency of this thread thus far been me doing lots of research and writing only to have as a reward people firing bloody silly questions at me (another reason I stopped) I have no Idea if anyone’s reading what I am spending hours writing, or understands what's being shown , I have no Idea if anyone understands the basic principles outlined by EPD, Bedini, Bearden, and others which I'm really just amplifying.
    Anyway you don't all have one of these machines powering your house do you? Soooo that means there is at least some small part of the theory of what’s going on here you don't understand . I really have no choice but to cover the whole operation of this particular machine whilst assuming you have captured the gist of what has gone before. If you have fine .. if not revise it .. It all applies to this machine … to every machine and life itself.
    I am going to change the format here a little bit .. your going to have to take some time to learn and understand what ever it is you don’t understand , your going to have to let me know that you have grasped at least some of it , your going to have to do some homework .. and then give me some feedback . You do not … a/ disrupt the flow of the thread by asking questions off topic .b / disrupt the flow of the thread by trying to leap ahead, Instead if you fully understand a section that others do not and which I may be struggling to get across myself give me a hand on the thread or PM a member who may be a little lost . Don't be greedy and selfish ! I will do my best to find the most relevant information explained in the easiest way .. however if you find a better source .. Post it! Post it for every ones benefit . There really is no pot of gold any more as regards the miraculous “free energy machine” there never was , sure people have been bought off , threatened , murdered Its been nothing but a long agonizing 130 year fight to expose lying ,cheating ,robbing very nasty people who have stolen every bodies real wealth and freedom. I don't know what the reparations will be due to this filth but for the moment Its not the issue !
    Instead of what should have been an honest natural progression of humanity due to technology we had collectively learnt
    The Truth is having to be bulldozed through critical mass by hundreds and hundreds of people in countries around the world, mostly poor people who have to do it. This then is why there is no money to be made , What use is a magicians trick when everyone knows how its done? (not that this is a trick)
    There is no Bedini system, or Besslar system or Chas Campbell system or 3BGS system as I said before they all tap a common source, The Chas Campbell system is just another spigot off the main pipe. I still don’t feel entirely comfortable doing this but as I say the cats out of the bag already
    depending on who responds and how many folks are interested in knowing the ins and out's of this machine .. I'll continue ... of course I'm not going to knock my pan out for one or two guys who don’t really care one way or the other
    however If lots of bodies are happy to get back on the bus I'll try and get on with this trip I promised. There are four video's I'd like you to watch the first being just information and a re-cap Its a harsh truth that will be driven home to you in due course.
    the stupidest circuit - YouTube
    These next to video's are quite important and I'd like you to consider what both of these machines have in common .. there is actually one common factor to all these machines and its very important that you see what it is. Let me tell you right now .. both of these machines are absolutely legit and I'm happy to put my house on that !

    Chas Chambell Free Energy Generator Replica - Generating 2340 Watts using 750W - YouTube

    FREE ENERGY Motor Flywheel energy for freedom - YouTube

    Just for fun …
    Here's a guy who built a beautiful machine without a clue how or why it should work but its a bloody good effort!

    FREE ENERGY MY ASS!!! - YouTube

    Don't let this be you!

    Me Hotel California by Camper Van Dan - YouTube

    Homeless with 2 ton of junk !

    Chris Devine aka .. camper van Dan (I have emailed it doesn't work. I would have even considered going to Ireland for a couple of days to help this guy make his machine work)
    cdevine53@gmail.com

    And here's Chas Campbell effectively demonstrating he really hasn't got a clue what’s at the heart of his own system In this informative video called ' what a load of balls' .. (don’t let this be you either!)
    Chas Campbell - Gravity Wheel - YouTube
    Last edited by Duncan; 12-22-2013, 11:18 AM.
    Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

    Comment


    • The response is deafening Duncan, the power amplification, and smoothing out, in a flywheel must never be underestimated.

      I havn't yet heard an explanatation of what gravity is!!, guess we will have to lump it in with Magnetism.

      So much we havn't been taught, funny that!!.

      Warm Regards Cornboy.
      Last edited by Cornboy 555; 12-23-2013, 08:07 AM. Reason: crappy spelling.

      Comment


      • Originally posted by Cornboy 555 View Post
        The response is deafening Duncan, the power amplification, and smoothing out, in a flywheel must never be underestimated.

        I havn't yet heard an explanatation of what gravity is!!, guess we will have to lump it in with Magnetism.

        So much we havn't been taught, funny that!!.

        Warm Regards Cornboy.
        Cornboy this is not essentually a mechanical device at all. It is a High frequency RF device more suited to radio engineers to understand than mechanics It is being driven by magnetic current
        Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

        Comment


        • Thanks Duncan, how do you define magnetic current?

          Comment


          • Originally posted by Cornboy 555 View Post
            Thanks Duncan, how do you define magnetic current?
            If you were to look in aged text books what you now call reactive current used to be called Magnetic current . The powers that be considered it politic to alter that name after a publication by a little chap called Edward Leedskalnin lest folks managed to put two and two together.
            John Bedini in one of his writings assumes reactive current to be one and the same as radiant energy , that isn't quite right IMHO although I don't really want to lock horns with a giant of that stature radiant energy is transformed to reactive current .. magnetic current .. in a state of series resonance just as a radio wave is turned to voltage in a state of parallel resonance . Radio engineers with the exception of one never use series resonance .. the theory of magnetic current … The corresponding wave is all vigorously denied and never taught here is EPD describing that very state in operation from 1M40 >
            Part 3 of 6: Eric Dollard Tesla Longitudinal Wave Energy SBARC Ham Radio with Chris Carson - YouTube PS you'll get on quicker spotting what is similar with those two machines and Chas Campbells too if you wish

            Last edited by Duncan; 12-23-2013, 11:36 AM.
            Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

            Comment


            • Ready to start

              Ok.
              I watched all the vids on YouTube, went to the Nest website to look for the plans. But they wanted a donation. If so many others around the world have built this , then can we find the plans too?

              Or can this be replicated from the vids? Not wanting to get you or anyone targeted by tptb, cause it's not that big a secret if so many are building it.

              An ac motor, large flywheel, generator, pulleys, belts. What did I leave out.

              Just as my name states,
              wantomake

              Comment


              • Hey Duncan, i am trying to understand the direction from you.

                Are you saying that the flywheel etc are not necessary?, that you can directly couple the motor and alternator, and the magnetic current exchange, is what produces the effect?

                Regards Cornboy.

                Comment


                • I plan it simple. I have old 650VA gasoline generator , old style with a big alternator coupled to the engine shaft. I dissassembled what I could and because I was unable to remove crankshaft completely I just cut then piston. Now it's time to lag a little , I have to make or get a part to connect shaft to the DC motor....

                  Comment


                  • cornboy and boguslaw I have actually explained this system A to Z on another forum but some didn't grasp what I was saying I was trying a different approach here .. however if you go here

                    The Jigs Up !

                    you may pick up what's happening and why
                    Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

                    Comment


                    • So looking at the video of the fellow running gens in parallel, he was trying too keep them out of phase. Dollard was talking about the "Burn Through" at resonance.

                      So what your saying is the motor and the gen need to be In phase with each other at an accelerated RPM. IE the first article on driving an induction motor as a gen.

                      Either way if you could just lay it out simple step by step the flow of power, that will give starting point anyway.

                      I got some leads on a few things I can get cheap so I am going to give it try. Might take some time to build.

                      Cheers
                      Matt

                      Comment


                      • Originally posted by Matthew Jones View Post
                        So looking at the video of the fellow running gens in parallel, he was trying too keep them out of phase. Dollard was talking about the "Burn Through" at resonance.

                        So what your saying is the motor and the gen need to be In phase with each other at an accelerated RPM. IE the first article on driving an induction motor as a gen.

                        Either way if you could just lay it out simple step by step the flow of power, that will give starting point anyway.

                        I got some leads on a few things I can get cheap so I am going to give it try. Might take some time to build.

                        Cheers
                        Matt
                        its series resonance your aiming to achieve and hold Matt just the same as the 3BGS and that big flywheel is there to keep you pretty much on it with different loads. The extra power is from the same source as well the electrostatic wave and magnetic current . Two induction machines joined together will synchronise obviously the voltages must be the same and normally the currents are .. pretty much, .. however you want to force a state of resonance where the voltage and current are out of phase by 90deg you can do that by overloading the small motor to just the right extent. That makes the machines respond to the linear electrostatic wave and magnetic current just as the 3BGS did.
                        (When you could get it into resonance). .. I haven't attempted a build of this thing but they are popping up like mushrooms. and that's how I see the dots joining. I have been thinking of ways to try make a small .. dirt cheap demonstration one but I'm bit tied up with a Steve Mark attempt right now if that works as I think it will I wont be bothering with any rotating things .. I all ready got machine gunned with flying magnets by the Hatem machine when I lost control of it.
                        Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

                        Comment


                        • woo hoo!!

                          Thanks Duncan!
                          What a great Christmas gift you have shared! I'm not saying I understand it all, but now we all have a direction to go! Hopefully a few of these mushrooms can now pop up around my neck of the woods! Thanks again, and wishing you and your family a Merry Christmas and A happy Prosperous New Year!
                          When time allows ill be digging through my "collectables" and see what I can find!

                          Merry Christmas everyone.
                          Jason

                          Comment


                          • Thanks Duncan,

                            I am one of the "lurkers" who have been following your revalations with great interest. Whilst family commitments restrict ability and time available for experimentation that does not prevent a wish to understand the process and hopefully partake in building in the not too distant future.

                            I, for one, appreciate your time and energy in this thread and will try my best to understand and keep up. I hope I am not the only one on this forum who only has a basic education and does not understand electronics fully yet.

                            On behalf of the silent majority, please, please continue to enlighten us.

                            http://www.energeticforum.com/images/smilies/thanks.gif

                            All the best for the New Year to all Members

                            Mike

                            Comment

                            Working...
                            X