Announcement

Collapse
No announcement yet.

Gen-E-Sys II & Liberty EN-GEN technology

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gen-E-Sys II & Liberty EN-GEN technology

    Hello,

    If you are interested in "renewable" "energy" you might enjoy having a look at this website backgauges.com/Gen-E-Sys II/

    It is about SUSTAINABLE "energy" for you.

    It is about PRACTICAL "energy" for Mankind. (Ladies too)

    It contains Keys to E=mc2 on a practical level right now.

    There is much to read, some pictures, evidence, math, physics, science, gifts etc.... to back it all up. You decide.

    It is new and there is much more to be added and SHARED if given Time and help.

    I look forward to your responses here, though I have little time to "blog".

    Skeptics: see the page about skeptics and the contact page for what is required/how to engage. I do not waste time on "unhealthy" skeptics.
    Last edited by Gen-E-Sys II; 06-02-2013, 12:51 PM. Reason: wrong address

  • #2
    Originally posted by Gen-E-Sys II View Post
    Hello,

    If you are interested in "renewable" "energy" you might enjoy having a look at this website backgauges.com/Gen-E-Sys II/

    It is about SUSTAINABLE "energy" for you.

    It is about PRACTICAL "energy" for Mankind. (Ladies too)

    It contains Keys to E=mc2 on a practical level right now.

    There is much to read, some pictures, evidence, math, physics, science, gifts etc.... to back it all up. You decide.

    It is new and there is much more to be added and SHARED if given Time and help.

    I look forward to your responses here, though I have little time to "blog".

    Skeptics: see the page about skeptics and the contact page for what is required/how to engage. I do not waste time on "unhealthy" skeptics.
    Do you claim to have an OU device, or not?

    Comment


    • #3
      You decide - I gave you what I decided to share.

      Comment


      • #4
        I spent some time looking around your site. Fast skimming mostly but I believe you say overunity is not possible. The definition of overunity leaves some room for debate but I won't get into that. Most people here believe there is a possibility of getting power from unseen and not well understood things such as the 'aether' or zero point. When that source is tapped (like solar or wind which we do know about) it can seem like we have 'overunity' but in reality it is just tapping a source not easily seen.

        I was not able to quickly determine exactly what you have in the En-Gen II system. It reminds me of a couple other systems I've seen which 'seem' to have more power out than in. Is this what you have? Can it be looped to self run and have enough power left over to do useful work. If not then I laud your efforts to create a better highly efficient non-polluting mode of power generation but it may not get a lot of interest if it still needs the electric grid to power it as that grid is powered by partly by coal and nuclear power neither of which is a good choice.
        There is no important work, there are only a series of moments to demonstrate your mastery and impeccability. Quote from Almine

        Comment


        • #5
          stargate22 Look again. I found essentially the answer to my own question:

          Page 42

          It says "It is my intention to gift the information provided, my original work product and intellectual property to all people of the world hereby making the discoveries and inventions revealed herein common knowledge in the public domain.

          They are revealed and deliberately published and disseminated on the Internet for the express purpose of foreclosing any possibility of patent being issued for the concepts, arrangement and methods revealed, hereafter, now to be "prior art", worldwide.

          "The “gift” presented you is named: "The Liberty EN-GEN".
          The gift can provide: Power, free electrical, and mechanical power. "

          Sounds like he IS sharing some very good things here.
          There is no important work, there are only a series of moments to demonstrate your mastery and impeccability. Quote from Almine

          Comment


          • #6
            It seems to be a self sustained generator. He sounds pretty honest about giving the info out open source. Its alot to read and not very direct "to the point" directions of how to build it. Just the concepts at work. Sort of a way of giving out the info without claiming its free energy or overunity....back to reading...

            Comment


            • #7
              Yes it sounds similar to Bedini's friend Watson's machine and also to Chas Campbell's machine as seen in Patrick Kelly's free energy book. It also reminds me of several other motor-flywheel-generators that have come along but often seem to disappear under suspicious circumstances.
              There is no important work, there are only a series of moments to demonstrate your mastery and impeccability. Quote from Almine

              Comment


              • #8
                ewizard thank you for pointing that out, yes I AM ATTEMPTING to SHARE.

                What IS there: is but a scintilla of what can be made available to those who attempt to do likewise. Read it all carefully, digest it and make contact.

                Comment


                • #9
                  Originally posted by Gen-E-Sys II View Post
                  ewizard thank you for pointing that out, yes I AM ATTEMPTING to SHARE.

                  What IS there: is but a scintilla of what can be made available to those who attempt to do likewise. Read it all carefully, digest it and make contact.
                  The more I read on your site the more I like what I'm seeing. It has inspired me to look once again at a project I started last year but when the inventor disappeared suddenly I and the group I had assembled for that person by creating a forum for him essentially dissolved as we had no more input to work with and only had hints at what he actually had. It was a motor - generator setup but we were left with a lot of doubt as to whether it was actually a working setup and not enough info to move forward. I suspected a flywheel was involved in his setup. Now that I've started looking at your info I'm inspired to get back to that project. I think the part I need most to try this will be a small efficient generator as the motor I have is fairly small (but I believe efficient). I'll look at other options too for a motor though. Again thank you very much for sharing and all the work you have put into your web site to share this work.

                  There is no important work, there are only a series of moments to demonstrate your mastery and impeccability. Quote from Almine

                  Comment


                  • #10
                    Originally posted by ewizard View Post
                    The more I read on your site the more I like what I'm seeing. It has inspired me to look once again at a project I started last year but when the inventor disappeared suddenly I and the group I had assembled for that person by creating a forum for him essentially dissolved as we had no more input to work with and only had hints at what he actually had. It was a motor - generator setup but we were left with a lot of doubt as to whether it was actually a working setup and not enough info to move forward. I suspected a flywheel was involved in his setup. Now that I've started looking at your info I'm inspired to get back to that project. I think the part I need most to try this will be a small efficient generator as the motor I have is fairly small (but I believe efficient). I'll look at other options too for a motor though. Again thank you very much for sharing and all the work you have put into your web site to share this work.

                    ewizard - find the calculator and video on it. Keep reading - tie it all together.

                    Thank you for your kind words, and you are Welcome.

                    Comment


                    • #11
                      Michael thank you for sharing these pages, you have invested some time and have developed a very “Layman Friendly” approach to your presentation,
                      always thought things should have a flywheel.
                      I will be reading this in finer detail as time permits, but at first glance all we can say is

                      Comment


                      • #12
                        It is deliberately written at a "Laymen friendly" level because they are the intended "audience" being addressed.

                        They and their children are the Future of Man.

                        Hope to be of help, You are quite welcome.

                        Michael

                        Comment


                        • #13
                          The task ahead of you is clearly laid out and awaits only your WORK effort and "will".

                          Consult at: "unhealthy" skeptic and contact

                          Until such point in Time, no time or effort for you. Otherwise: Consider following your own earlier advice: "move along ....."

                          Comment


                          • #14
                            stargate22, Maybe you missed the page where he said he was not an especially 'religious' person in the past. I think his near death experience may have changed that and I firmly believe people who have had that experience often get great insights. I've personally known several people who came back from an NDE with incredible insights and some with healing powers and other special abilities. Whether you believe that or not doesn't really matter. In my opinion he has enough very technical detail on his web site to convince me this is worth looking into.

                            There seems to be a 'thing' many older people are noticing lately (and I've seen mainstream news articles along this line) about how the Internet has changed many people into needing a sort of 'Instant gratification' or maybe in this case an 'Instant proof' of something and if it isn't provided as proof positive instantly then people just tend to move on to the next page. Personally I think I'll stick around this page for now
                            There is no important work, there are only a series of moments to demonstrate your mastery and impeccability. Quote from Almine

                            Comment


                            • #15
                              I honestly have no desire to engage you. - You are probably beyond anything I might write to befriend you.
                              That you failed to read and comprehend my first post:
                              "Skeptics: see the page about skeptics and the contact page for what is required/how to engage. I do not waste time on "unhealthy" skeptics."

                              Is your failure AB INITIO, not mine. Then that you fail to quote words from "unhealthy" skeptics is yet another failure, which is fine with me. Haven't seen your thesis refuting the totality of my WORK from your own "personal knowledge" or any contact info either. Please don't cherry pick and spin attempting to shift the burden. If you deny God, or mock God that is between you and yours.

                              You have no "case" - you have a burden - a very large burden.

                              Perhaps I have you all wrong? Please be so kind as to explain yourself fully.

                              Comment

                              Working...
                              X