Announcement

Collapse
No announcement yet.

Lets start the new year with a bang!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lets start the new year with a bang!

    I am an electrician I don't even make any claims to the vaunted title of 'engineer' I used to work on oil rigs some times however for my sins of writing openly on forums particularly this one I got 'Blacked' that's an unofficial list that virtually makes you unemployable which like the linear wave isn't supposed to exist .. yeah right !
    To those of you who have been kind enough to read my performances some I must confess scribbled drunk and some stone cold sober and very angry I am very obliged.
    I promised at the start of this trip that you would be in for a 'hell of a ride' I didn't really fully comprehend what a dangerous and frightening drive it would be for me. Put yourself In my shoe's for a moment , unemployed and somewhat down at heel , and you win a huge lottery ticket .. your saved! Ah but then your asked to give every ha’p’orth of it away , Not even a button left to give your children. For all the comments on here of people being selfish and greedy and playing mind games ask yourself this … If it was you could you give the only thing you had ever won in your life away?
    Except this isn't even 'won' by chance Its hard fought for, and Its a question many have had to face I suspect , you have seen Matt and David claim success and clam up and then go ''the investment route' I don't blame them at all as I said .. Its a big .. Its a huge ask and that route is a holding cell for the gollum that’s Inside of us all. Its possible to convince yourself your 'developing and perfecting' for the sake of all whilst actually keeping the precious ring .. well hidden. Well I've tried each of the pieces of this .. or at least as far as I can I durst not build the whole thing .. yet. If I am right and I am very sure of it .. and it works as I predict , could I trust myself to give it away?
    In this hard fought battle I have been helped by many but before I could become a trooper I didn't realise I had to do a great deal of basic training. I like to think I have many friends on this particular forum. In truth I have few in real life I have been far to busy engaged in this war .. one way or another.
    One of the most shocking and really frightening discoveries I made was this is nothing what so ever to do with energy. It is all to do with good and evil, (and in the case of energy it happens to take the form of greed) . To be a free people or to be slaves? A frightening concept stares us right in the face .. will our son's or daughters even understand the concept of something that used to be called privacy ? Never mind freedom.
    At that point I really felt the battle to be a rout but have kept doggedly at the task battering my head yet again against the wall, luckily there are but few brain cells inside to be disturbed, In fact were there to be another one , It would be lonely. Every one knows free energy researchers are deranged lunatics anyway don't they?
    However Soon their smirks will change to astonishment I promise. In days if I'm right and in weeks if I'm wrong.
    Gradually I have learned who the enemy is, where he is, I like to think I’ve managed a few pot shots
    in the right general direction. I have also I think wounded some good friends accidentally and for reasons they are perhaps still puzzled about ..( sorry orion not your fault at all).
    There are a few battle tactics I have watched that don't work, The video for instance … It doesn't
    why ? Because Its a mind twist and if there is any possible way for humanity to believe its a trick
    then they will, The reason ? The alternatives are far to unpalatable to contemplate ! If free energy exists then the rest of the odious stinking midden heap is also true. (and it is I'm afraid. I know it is because I’ve had one or minor successes, enough to know which way to point my cap anyway.)
    They are then obliged to fight! Rather as when Germany invaded Poland Britain was obliged to fight. So will you be for the sake of your sons daughters and grandchildren.
    So you see in the war 'free energy' is just a skirmish never the less it is one I am now determined to help win regardless of cost. I’ve been working quietly alone planning how I might secretly change the course of the fight entirely. I thought of old battle tactics that might be used that could overwhelm and utterly destroy the enemy at one go. And hopeful before he could destroy me,although no doubt he will destroy me, I'll try to ensure its a Pyrrhic victory.
    so you can see the plan and be part of it. here is what I conceived the battle tactic is based on one from nearly a hundred years ago combined with one of seventy years ago I rather hope it catches the enemy (tptb) by surprise the first world war was in full swing, It was a bitter conflict that developed into two trenches stretching for many miles a total stale mate, exactly as we have on these forums … power in … power out rubbish , sell your machine make a fortune , well I'm sure you all know the banter be you friend or foe as we take pot shots and lob the odd Mortar at each other.
    Well I remembered an action called the ' Lochnagar mine ' It wasn't particularly successful at the time but I think it has possibilities here providing my side is prepared to quickly assemble and help,
    by doing the right thing, not the profitable thing but the right thing! If not my sacrifice is for naught.
    At Lochnagar a team of British basically 'coal miners' tunnelled quietly across no man's land, then working as quietly as mice they dug a cavern under the German trench. Of course every morsel of earth had to be carried back to the British lines and disposed of surreptitiously so as not to arouse the suspicions of the enemy and particularly their observation pilots , The British then began to quietly fill the cavern with tons and tons of high explosive. At 7.30 in the morning On the first of July 1916 exactly 97 ½ years ago today … the plunger was pressed, Nearly a hundred years later this is a picture of that attempt to break the stalemate



    Lochnagar Crater, La Boisselle, Somme Battlefields

    I thought perhaps such a tactic might prevail here and so I've been quietly assembling the explosives under the enemy trench , win or lose I'm sure the opposition tptb (the powers that be) won't like this bang very much.
    you may then be wondering what the other vintage tactic is I try to bring into play why it was called
    kamikaze all my own personnel dreams are sacrificed.
    I have committed my explosives to a PDF I have published it under my own name most I have come to the conclusion these guys know who you are anyway If you think your anonymous think again ! of the protagonists at Lochnagar most were vaporised in the conflict .. at least I have the option to be known. I view that as a great privilege.
    In one page I have dissembled the Steve Mark TPU for you, with a rough explanation of its operation . But that alone won't take and hold the enemy line I'm sure!
    I go on to explain how each part fits into the whole of the machine. IMHO that still won't hold the line either! I go on to describe some of the detective work involved in the investigation of Steve Mark and the material he must have stolen from his company and how its used …. perhaps then enough to blow the line but not to hold it, .. I go on to explain the resonance and the waves that have been hidden from you and the way they fit into the whole issue .. you see I want you to fully understand each step. Savour each morsel. Whilst our oppressors taste only ashes.
    I get hold of lenz law by its scuff and turn it back on its self .. and show you how its done and why.
    I still didn't think that would be sufficient to take and hold the line … Its the core of the lies and filth of this part of the conflict that needs exposing the Dupe Albert Einstein who in turn has duped all of us.
    I am more a hewer of wood and drawer of water than a man of science still I often watch EPD and hope little gems of the man's genius might rub off on me , Not in a higher maths form you understand but in such a way I can understand and give form to the lies of Einstein such that others might see and clearly understand the filthy tricks being played out on humanity by so called 'public servants' if this bloated filth is the servants one wonders what the masters are like?
    Its certainly extremely difficult to drag them and their criminal bankster friends away from the teats
    of society at large



    I here then add substantial weight to Professor Dollards work in my own humble way and identify the illusion and try to give it form.
    youngsters who's pencils are still sharp can quickly resolve the distance of the deception given the direction I would hope. They can run much faster and harder than I.

    Here's what I would like you to do next then … first and most importantly down load this PDF next download any of the pertaining web pages you might feel you need to learn the material. Because they are sure to be attacked in order to render the PDF worthless.(That is really why I introduced and explain the whole concept on the first page!)

    http://dnp.s3.amazonaws.com/b/b5/Duncan's real doughnut.pdf

    Digest and understand as much of what I have written as you can .. check it out any which way you like. .. I have explained each step as an engineering progression So you can understand why and how and then adapt to what materials you have.

    I wish you all a Happy, and I hope very different new year ! Bless Duncan.

    PS .. for some reason the link on induced magnetism didn't survive the conversion to PDF .. here it is again

    Magnetic Fields
    Last edited by Duncan; 01-01-2014, 05:55 AM.
    Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

  • #2
    We're still here

    Duncan,
    Neither Matt nor I have given up, nor have we sold out to the powers that be. Matt is busy right now with his farm, and I have been concentrating on this generator project. If and when we have something that is PROVEN to work, we will probably dump it here. I have had a major company providing me with parts and things that I have needed, but haven't had to sign away anything to get that contribution. I suppose they could eventually try and steal away the design and patent it, but I have made no promises not to disclose. So we're still around and working on things.

    I posted (just today) on the 3BGS thread EXACTLY where I truly believe we need to concentrate our research efforts. Haven't read your pdf yet, but looking forward to it.

    I have been sharing anything I come up with in emails to a whole group of folks, but so far nothing to write home to mom about. If I discover something incredible, a whole mess of folks will know about it. Never fear.

    Dave
    “Advances are made by answering questions. Discoveries are made by questioning answers.”
    —Bernhard Haisch, Astrophysicist

    Comment


    • #3
      Don't get to bent out of shape David (either of you) . Your going a route I probably would myself
      as I say I stopped before finally proving the thing .. I don't think I could then trust myself to be able to 'give it away' after all nobody has managed to yet, have they? Something s always stopped them.
      One way or another, There's no criticism implied David so please don’t take it so .
      As for Matt he states quite openly that he removes posts and information because Its 'worth money' you know its so ! I'll link to the posts if you insist Do you think I could trust myself not to do the same thing? after all I'm only human (ish) myself
      Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

      Comment


      • #4
        If you build it….

        Duncan,
        You may not know just how committed to the investigation of this stuff I really am. So I will make you this offer. You know my email address. If you want to walk me step by step through the construction of the device you believe will work, I will happily incur the expense of purchasing the specific parts if you will point them out to me. I would follow your directions for the build and post pictures and results here so that everyone can see. I believe I have most of the meters and measuring equipment I would need to complete such a project. As I see it, the first step would be the magnetic material for a torrid? If so, do you have any idea where to obtain such? If not, what IS the first step. I say let's get cracking. Time's a wasting.

        Dave
        “Advances are made by answering questions. Discoveries are made by questioning answers.”
        —Bernhard Haisch, Astrophysicist

        Comment


        • #5
          Originally posted by Turion View Post
          Duncan,
          You may not know just how committed to the investigation of this stuff I really am. So I will make you this offer. You know my email address. If you want to walk me step by step through the construction of the device you believe will work, I will happily incur the expense of purchasing the specific parts if you will point them out to me. I would follow your directions for the build and post pictures and results here so that everyone can see. I believe I have most of the meters and measuring equipment I would need to complete such a project. As I see it, the first step would be the magnetic material for a torrid? If so, do you have any idea where to obtain such? If not, what IS the first step. I say let's get cracking. Time's a wasting.

          Dave
          David I am also assembling material to put this together . As I describe the magnetic material Steve mark would have used initially would have been 'Purloined' from the speaker factory where he worked (actually the material you see the loudspeaker electromagnet wound on) MJN thinks It could have been done later using iron and some thing called 'nuclear acoustic resonance' I have no Idea what that is ! As for myself I have elected to try with “pure Iron” because it obviously has to be very 'soft magnetic' material . Iron is also not easy to obtain however I have 2 meters of 20mm Iron Bar which I am going to try with . I don’t have he means to bend it though . And it needs a forge so It can cool very slowly or else It'll lose the very properties I need to preserve. … so I took the Iron to a black smith … very busy .. after Christmas .
          Anyway David magnetic materials have changed out of all recognition since my schooling and its not a subject I'm well boned up on anyway but I have posted this across three forums and I'm sure there's a magnetic guy who knows more than I do .. that bomb went off just about Now!

          (now two forums .. my post seems to have been taken down from overunity.com) for reasons unknown
          Last edited by Duncan; 01-01-2014, 08:00 AM.
          Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

          Comment


          • #6
            Its back up again now … yeah Its not really a cost thing David .. well apart from bespoke magnetic components that is, Its actually finding alternatives that everyone else can get hold of . I have obviously been thinking quite hard about possible alternatives . And one of the possible alternatives I came up with was two links of an old Iron anchor chain, they could then be cut in half making something like four Leedskalnin PMH s although not a toroid (which is Ideal) they could be wound like PMHs and then put together as the toroid is. I did find some anchor chain but alas when I tested it with a magnet it was not very pure , much better than Mild steel which is quite useless obviously, but this Iron was still to retentive to my mind ! I'm sure you remember I was hunting a big toroid a while ago David ? This was at the back of my mind then. You sent me a link if you remember ?
            I couldn't get the full specifications of the thing and so couldn't work out if it was viable or not . And although it was big .. not really big enough
            Magnetic engineering at high frequency is a bit of a specialist field. I don't even see much in the way of B/H curves and magnetic frequency response times on the WWW,
            Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

            Comment


            • #7
              Core material

              Would the iron core from an old transformer be suitable for an attempted build? I would think so. Would it be okay to chop the transformer core with a bandsaw? I tried to use a hacksaw on a transformer one time and that stuff is hard to saw. I also have some small ferrite beads and odd pieces. Do they need to fit tightly? Do you have any thoughts on that?
              There is a reason why science has been successful and technology is widespread. Don't be afraid to do the math and apply the laws of physics.

              Comment


              • #8
                Originally posted by wayne.ct View Post
                Would the iron core from an old transformer be suitable for an attempted build? I would think so. Would it be okay to chop the transformer core with a bandsaw? I tried to use a hacksaw on a transformer one time and that stuff is hard to saw. I also have some small ferrite beads and odd pieces. Do they need to fit tightly? Do you have any thoughts on that?
                Hi wayne this paste from another thread for .. you to dwell on, as The concept wasn't grasped by a few others there .. there is very fast flux change going on here and I doubt a normal mains transformer core would come close you should see exactly why from this..


                Oh .. please don' t think I chide you, Its not so .. I want you to clearly understand .. Its far far simpler than gauss and the like … so don't worry your pretty heads so!

                We could form a small chain of nails and paperclips as shown below:



                You really don't need to make things complicated So dont! Do you think a fool such as myself could possibly work it out if it was complicated ? And luckily
                'What one fool can do, another can (ancient simian proverb) quoted by Silvanus P Thomson a FE resercher of note hmself


                Silvanus P Thompson

                This is so easy you rush by but don't see . You see the Bar magnet holding Iron nails ? If you very gently removed the bar magnet from the top nail why all of the nails would Immediately separate and fall to the floor …. that’s because Iron is a 'Soft magnetic material' this is what our four separate cores are made of . Soft magnetic material .
                The other end of the magnet is Holding paper clips , They are not made of Iron they are made of mild steel MS It is a very different kettle of fish ! if you carefully remove the magnet all the paper clips will remain stuck together, they will remain magnetised because Mild steel is a very hard magnetic material . Exactly what we do not want .
                Now so you under stand a little better what is occurring picture the particular Iron nail the arrow is pointing at to be one of the four electromagnets I have drawn , (in fact one of the electromagnets supplying the load) what would happen to the poles of that Iron nail if the one above it and the one below it reversed polarity ? Why it would have to instantly reverse poles itself.
                Now to take your Imagination just one step further I'm sure most have an Idea how a transformer works ,, or rather how we are taught it works … now imagine that nail to be the secondary core of a transformer . With windings on it . Each time the flux changes direction .. why It induces a voltage
                and the formula for the voltage produced is

                EMF = -T
                ..............dt

                .. where T is the number of turns
                dΦ is the changing magnetic flux
                dt is the time it changes in

                For those who hate to tangle with calculus in any shape or form

                E = Turns x (Φ1-Φ2) is quite sufficient where Φ1 and Φ2 are the minimum and maximum flux
                .................(t1 – t2) whilst t1 and t2 are the times of each cycle

                For those who would like to 'bone up' a little more on Transformer theory you can fill ya boots here ..

                EMF Equation of Transformer | Turns Voltage Transformation Ratio of Transformer | Electrical Engineering
                So now do you grasp how simple it really is ? There is no need to get complex .. there is nothing complex or complicated happening here or else I couldn't possibly under stand it I assure you.
                Now perhaps you also see why Steve Mark was so busily engaged in working out turns ratio's It is essentially a transformer action.. although much faster than you would normally be used to . Which is why as I say I am struggling to find suitable core material. I hope that clears things a little bit for you all. and lets you see whats required and why ! PS Steve Mark tells us his frequency was 8KHz .. I see no reason to doubt that Its the center of a loud speakers spectrum (ish) Its material he would have mmmm whats the word I'm liiking for
                Last edited by Duncan; 01-02-2014, 07:12 AM.
                Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

                Comment


                • #9
                  Hi Duncan,

                  Just wondering if a ferrite material would work for the core?

                  Comment


                  • #10
                    Originally posted by Netica View Post
                    Hi Duncan,

                    Just wondering if a ferrite material would work for the core?
                    Hi Netica It probably would ... depending there are various grades and types of ferrite. I did buy some ex USSR ones to try about 5 inch Dia .. Its difficult stuff to cut very nicley as you probably know but an electric Tile cutter managed a fair job (eventually) I tried the cores with a signal injector and a few windings into a scope to see the transfer .. pretty worthless, which of course doesn't mean all ferrite cores are worthless .. again its down to magnetic engineering and I dont even see to much avaliable for even freq responce curves on the WWW .. obviously the stuff does exsist every loudspeaker uses the principle some up to a 1000watt s
                    Last edited by Duncan; 01-02-2014, 09:16 AM.
                    Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

                    Comment


                    • #11
                      Hi Duncan,

                      Might be to expensive to find something to use in ferrite then. But I could imagine that it would be quite feasible with some money and engineering.

                      I don't know much about the material construction within a speaker other that what I have seen when pulling one apart, and to me it just looked like a coiled wire floating within a permanent magnets magnetic field attached to the speaker.

                      Soft mild steel as you are trying out, might be one of the easiest cheap materials to use. I have found that it is important to use steel with the least amount of carbon content that can be found for switching magnetic fields on and off and not retaining magnetism.

                      I have also experimented with Leedskalnin's perpetual magnet holder and found it only works with carbon in the steel, take the carbon away and it doesn't work.

                      Comment


                      • #12
                        Originally posted by Netica View Post
                        Hi Duncan,

                        Might be to expensive to find something to use in ferrite then. But I could imagine that it would be quite feasible with some money and engineering.

                        I don't know much about the material construction within a speaker other that what I have seen when pulling one apart, and to me it just looked like a coiled wire floating within a permanent magnets magnetic field attached to the speaker.

                        Soft mild steel as you are trying out, might be one of the easiest cheap materials to use. I have found that it is important to use steel with the least amount of carbon content that can be found for switching magnetic fields on and off and not retaining magnetism.

                        I have also experimented with Leedskalnin's perpetual magnet holder and found it only works with carbon in the steel, take the carbon away and it doesn't work.
                        I am going to try pure Iron I have bought some from these guys but I don't have the means to bend it , Its at a black smiths .. far from Ideal but its got to be worth a try

                        Legg Brothers - Specialist Hot Rollers of Small Steel Sections - Wolverhampton West Midlands

                        don't know how long he's going to take to bend the stuff but I'll report in due course if some one doesn't beat me to it . Its a big ask isn't it for something to reverse polarity 8ooo times a second very efficently but of course that's exactly what a loudspeaker must do there's no question about that !! it also must transduce wow those things at Rock gigs .. 1000s of watts efficiently and be a very soft magnetic material ... give me a name and a source for that stuff my kingdom for a bit of magnetic stuff
                        Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

                        Comment


                        • #13
                          Duncan, thanks for all your sharing, and helping beat back the fog of scientific amnesia into which I and many others been schooled.

                          It seems to me you're saying a few things:
                          - series resonance involves a 90 degree phase shift between voltage and magnetism/current.
                          - series resonance (thru a 90 deg phase shift) is one pathway to negative resistance, or drawing energy into a circuit from the electrostatic ambient/vacuum. In this sense, it is not strictly overunity (for the sticklers), but rather, a circuit's means to extracting additional energy from the environment.

                          There seem to be a number of different ways to skin this series resonance cat (e.g., via placement of capacitor, parallel bifi coil windings, caduceus windings, 555 timer switch before inductor...). Many are approaching it from different directions, like hunters moving through the forest along different paths to warm themselves at the same fire. Surely we're moving toward a common understanding this way.

                          Happy New Year!
                          Bob

                          Comment


                          • #14
                            Iron Source

                            Re enforcing bar for concrete I think would be a good source

                            Regards

                            Mike

                            Comment


                            • #15
                              Originally posted by Bob Smith View Post
                              Duncan, thanks for all your sharing, and helping beat back the fog of scientific amnesia into which I and many others been schooled.

                              It seems to me you're saying a few things:
                              - series resonance involves a 90 degree phase shift between voltage and magnetism/current.
                              - series resonance (thru a 90 deg phase shift) is one pathway to negative resistance, or drawing energy into a circuit from the electrostatic ambient/vacuum. In this sense, it is not strictly overunity (for the sticklers), but rather, a circuit's means to extracting additional energy from the environment.

                              There seem to be a number of different ways to skin this series resonance cat (e.g., via placement of capacitor, parallel bifi coil windings, caduceus windings, 555 timer switch before inductor...). Many are approaching it from different directions, like hunters moving through the forest along different paths to warm themselves at the same fire. Surely we're moving toward a common understanding this way.

                              Happy New Year!
                              Bob
                              Q series resonance involves a 90 degree phase shift between voltage and magnetism/current.
                              A. series and parallel resonance are caused by a 90 deg phase shift between voltage and current but the order is reversed
                              Q series resonance (thru a 90 deg phase shift) is one pathway to negative resistance, or drawing energy into a circuit from the electrostatic ambient/vacuum. In this sense, it is not strictly overunity (for the sticklers), but rather, a circuit's means to extracting additional energy from the environment.
                              A series resonance is the only pathway to COP>1 in these electrical machines. every single one of them. series resonance is in the picture some where. thats why its hidden
                              Bob let me put it in clear --- there are two forces in electricity 1/electrostatic and 2/ electromagnetic
                              Electric forces
                              Magnetic forces
                              also on the same page Bob you'll see the Lorentz/Eienstein force law which is where all the corruptin originates if you look at the magnetic section you'll see a 90 deg vector this would be used for what you commonly call radio waves

                              now look at the electrostatic offering .. its just missing , so's all the maths technology and information ... as a radio wave is tuned into a feeble voltage at resonance
                              so at linear resonance the electrostatic wave Teslas wireless wave .. which you may know as the sea of energy is turned to massive ammounts of magnetic current .. which you may know as reactive current. He's a few things to consider Bob .. A lead acid battery will charge just as well on reactive current as it will on real current. Its a huge exception to the rule ! Read through this if you doubt that.

                              Capacitive Battery Charger - John Saves Energy

                              That resonant state is difficult to hold and changes with load and battery condition .. as you know from the 3BGS .. because that's what's happening .. the series resonant impulse wave is making the battery resonant to the electrostatic wave , which allows huge amounts of magnetic current to flow ... IMHO the motors and bad batteries are just a means to develop a sharp impulse wave.
                              And what you call 'in the zone' is being lucky to find series resonance and stay on it for a while
                              Whatever you can do,or dream you can,begin it.Boldness has genius,power and magic in it.Begin it now.

                              Comment

                              Working...
                              X