Analysis of the WITTS Generator

[Joit]

Vidbid
Did you see this Thread?
http://www.energeticforum.com/renewa...g-swindle.html

I wouldnt worry to much about CO2 that it can damage this Planet.
But the bankers with her greed and the politic with her endless need of growing from sales and economy can by destroy and poison all resources.

Just for the QEG now it doesnt looks good.
Someone posted that they anyhow dont have a working prototype, they more or less try to fix it with some engineers. That power what they got out is not more then a light bulb.
And anyhow, they seems got the Plans from witts, posted incomplete Plans,
(beside that someone stated, Witts generator is proven as a fraud, not sure where this info comes from, i didnt found anything about it)
and hope that they can tune it up

But well, anyway, that is what someone did post, not sure how much reliable that is, but right now the whole thing about it is some suspicious, when they once say, its open source but dont give all informations out. And allways ask for money.

My best suggestion is too, that the one who see something in this principle should tinker with it around. Maybe someone can find something more out.

[vidbid]

Vidbid
Did you see this Thread?
http://www.energeticforum.com/renewa...g-swindle.html

I wouldnt worry to much about CO2 that it can damage this Planet.
But the bankers with her greed and the politic with her endless need of growing from sales and economy can by destroy and poison all resources.

Just for the QEG now it doesnt looks good.
Someone posted that they anyhow dont have a working prototype, they more or less try to fix it with some engineers. That power what they got out is not more then a light bulb.
And anyhow, they seems got the Plans from witts, posted incomplete Plans,
(beside that someone stated, Witts generator is proven as a fraud, not sure where this info comes from, i didnt found anything about it)
and hope that they can tune it up

But well, anyway, that is what someone did post, not sure how much reliable that is, but right now the whole thing about it is some suspicious, when they once say, its open source but dont give all informations out. And allways ask for money.

My best suggestion is too, that the one who see something in this principle should tinker with it around. Maybe someone can find something more out.

I think it's a little more complicated than that.

http://www.energeticforum.com/genera...l-rebound.html

Regards,

VIDBID

[moflint]

Hi Mark,

Good question. I don't know if those other devices work. For that matter, I don't know if the QEG works, but I hope it does. ...

Regards,

VIDBID

Ah, I hope it does too - I understand it's built from an existing patent from Tesla - and I have no reason to doubt that HE knew it worked! The James R. et al seem very genuine... it's gonna happen :-)

Best,
Mark

[OrionLightShip]

Flux Switching Alternator

This is a flux switching alternator. What does it have to do with QEG? Perhaps nothing other than to visualize the flux path switching using remnant magnetism of the core. Add a resonant re-enforcement circuit and you have the basic idea.

What hasn't been mentioned is the power needed to spin the rotor in the Taiwan video and of course, light bulbs can be deceiving. Also, where there is magnetism and variable reluctance you will find old man Lenz. Anyone see a way around that with this device?

I also just watched a long youtube interview with hopegirl. She states if you don't believe it will work, then it won't.

I am a believer in the esoteric nature of our existence. However, I don't believe in "Joe Cell Mysticism".

So many unanswered questions for something open source....time will tell all, or nothing at all.

Apologies to VidBid if I posted this on the wrong thread. Haven't been here in a long while.

[vidbid]

This is a flux switching alternator. What does it have to do with QEG? Perhaps nothing other than to visualize the flux path switching using remnant magnetism of the core. Add a resonant re-enforcement circuit and you have the basic idea.

What hasn't been mentioned is the power needed to spin the rotor in the Taiwan video and of course, light bulbs can be deceiving. Also, where there is magnetism and variable reluctance you will find old man Lenz. Anyone see a way around that with this device?

I also just watched a long youtube interview with hopegirl. She states if you don't believe it will work, then it won't.

I am a believer in the esoteric nature of our existence. However, I don't believe in "Joe Cell Mysticism".

So many unanswered questions for something open source....time will tell all, or nothing at all.

Apologies to VidBid if I posted this on the wrong thread. Haven't been here in a long while.

That's cool. I modified old, existing patent drawings to draw a QEG.

I wonder if a FSA could be modified to work as a QEG?

Regards,

VIDBID

[OrionLightShip]

That's cool. I modified old, existing patent drawings to draw a QEG.

I wonder if a FSA could be modified to work as a QEG?

Regards,

VIDBID

I don't see why not. Replace magnets with coils and external circuit components. I looked into this for a windmill alternator but priorities shifted. Core plates can be drawn and ordered using the software from emachineshop.com. Bobbins could be used instead of toroid winding....etc etc.

It seems the QEG depends on a physical, mechanical resonance so probably shouldn't change the physical properties too much.

I'm not really interested in the QEG due to the aforementioned mysticism but I saw the parallel with this FSA and thought I would post it.
good luck.

[JohnnBlade]

Another QEG news



@Shean, dont delete this post, thank you, comments may come from 2 sides, i aint no disbeliever, but i know what we builders do, and understand, what are facts concerning selfrunners and radiant devices.
The real builders have seen all free energy devices sofareonline, but who of them ever shared the real ****, and now they open sourcing, but still keeping info?

@ Shean, i know its yr site, and i respect that, im a Coder to, but dont represent peepz who benifit themselfs, in a new other bussines way.

Did yall see the chat in london? She only showed stuff we already seen on the internet, just a compilation of old news, but she never had the device, or the first device with her, so she only there to give hope to investors, and letting us builders build stuff that has no security that it works. I have an underuntity device, and im more willing to share but i have never the intention to crowdfund it.

My device can make more changes than what you have showed sofare, just be real, you made a hype arround this device so why not open a 24/7 cam so the rest of the world can look allong before its all gone, or yall deleted all stuff?



@ the QEG Team, why isnt there any news?

If the Taiwan device isnt working, why not show the origenal device?


Yall are showing stuff more difficult then i do, even my smallest post is info, but yall more busy crowdfunding then showing the main point

And that a device that can run it self.

Please be straight up and tell the world that you have a selfrunnkng device, or say that yr working on a selfrunning device.

Many peepz like us who build, show more stuff while it not life changing or that important, but it is, and yall device is da bomb for now, life changing and all, open source, everything, but still asking for more funding, for you to travel around, instead of using the money to finish the device, WTF.

Be real to the people, and tell them that yr working on a free energy device, but it hasnt worked sofare, cause if it did, why not give us detail on the first device that ( socalledly worked)

I build stuff, and so do many others. And we share, even if its useless, but yall still being slow, then it breaks down, never any real movie on the real first device before japan, and in last chat session, yall acted like yall never had a working device but know how to fix it.

Like somany fake peepz.

The moderator may delete my post again, but ima tell yall one thing, dont play with people minds who have more good willing then what yr all are doing.

The principle works, but yall keep comming acros more like you all are just figuring out new stuff, that doesnt make sense, since you have a first working device!?


@Shean dont delete my posts anymore, everybody has the right to say anything, and kf you delete my post or account you know that im right and you wanna be on the side of peepz who you dont even know and bull**** you and yr memebers on yr site.

Any forum has trolls or haters or whatever, and their posts are not being deleted, and you did so, cause people are only allowed to post good ****, and i am a coder and builder, but i know stuff, but that to much for you and i aknt selling anything and still you remove my posts?

@Shean, dont delete this post, its a forum, my comments might stimulate the qeg team to do more better, and if the cant delivier what they talking about then the are liers, but they Int liers sofare, cause if they really have a free energy device, the wanna make lots of money before they would really share it


Again, dont delete this post Shean, with all Respects






( i aint a trol/hater, but i know that if i share i share it as pure as i can, no funding needed ( maybe only for a new oscilloscope or sognal gen) but no taiwan, ima always show the origenal running device) no traveling around the world, givin seminars with old news.

You get me.

Dudes again, i dont hate, i just dont peepz who say this and wanna show this, but not showing it in the end, i call them Flashers



@shean, dont delete this post



Greets JB





Read before they delete as with my other posts

[JohnnBlade]

It can on 1 fase even 4 coils on one frequency, but yll get less underunity.

The device likes series, and when combining other sources of power from the main output has to be in series, and a cap inbetween.






QUOTE=vidbid;250856]

I think it's important to note that this circuit won't power a load on only one phase. It requires two.

Run Simulation



Regard

Vidbid[/QUOTE]

[JohnnBlade]

I have tested as much of diff setups, paralel, series, bifilar, but best sofare is series, and turned the right way, counter clockwise, clockwise you get a lill les energy.

I have a new record again, but i can only tell about with a newmovie

I can get 2 watts wile 3 is going in, and to know that i started with only getting 7mA in the start, and now i can get avg of 230mA till 330mA

Now my mission is to combine hgh voltage with the amp voltage, yesterday i had it, up to 2 watts instead of the default 1.3 watt out.

And remember that the ACMmJB does not notice any load connected to it.

Yall to busy with witts ang qeg, vidbid i like cause he likes to analyze, but stop yr simulations, and do some real **** cause you have the knowledge to make it work. I have seen yr style vidbid, get the parts and build it. The simulator isnt even close to the real world variables, the sim wont work in real life and i hope you ask me why.

Greets JB


Ps, i think that i have to open my own topic ln this forum, and hopefully havin right to delete peepz who dont build ****.



QUOTE=vidbid;251071]

Run Simulation

Regards,

Vidbid[/QUOTE]

[JohnnBlade]

I have decided to open my own thread, so i dont have to post in this witts thread

http://www.energeticforum.com/renewa...tml#post254106

Ima share everything there from now



Thnx all!

[vidbid]

Please disregard this image.



This image is out of context and from a post dated 2-17-14, long before the release of the 3-25-14 QEG construction plans. This circuit is my attempt at simulator implementation from Tesla's patent. I guess you could say that it was an attempt to guess at how the WITTS QEG might function. It has nothing to do with the current model of the FTW QEG. There was never any claim of overunity.

Regards,

VIDBID

[vidbid]

Please disregard this image.



Simple parallel and series resonant circuits and resonant frequency formula.

Nothing to get excited over.

Regards,

VIDBID

[vidbid]

Had fun with this one, many people should find this type of system similar to the 1930's Russian Parametric Amplifiers. Also found some patents that look very much like the QEG. I like the idea, nice work, not really difficult to figure out as a first look. Seen this sort of gear back in the 1990's, in Sydney area when many underground groups were building resonant motor/generators. Regards Arto.

Bravo, Arto!

This is what I'm talking about.

Well done.

Regards,

VIDBID

[JohnnBlade]

Greets VidBid,

An question: is it posible in your simulation to connect a 1 wire ac source to the minus or plus on the on the dc cap?

Sofare 1 cap has boosted my output amps.

I used 1000uF dc cap, ( i know it sounds weird using a dc cap in series with an AC wire connected back to the feeding source, or yr power goes down when hooked up,the wrong way, and the correct way it will boost my/any output.

Could you try it in yr sim? And see what wave shape you get?

Please disregard this image.



Simple parallel and series resonant circuits and resonant frequency formula.

Nothing to get excited over.

Regards,

VIDBID

[vidbid]

Greets VidBid,

An question: is it posible in your simulation to connect a 1 wire ac source to the minus or plus on the on the dc cap?

Sofare 1 cap has boosted my output amps.

I used 1000uF dc cap, ( i know it sounds weird using a dc cap in series with an AC wire connected back to the feeding source, or yr power goes down when hooked up,the wrong way, and the correct way it will boost my/any output.

Could you try it in yr sim? And see what wave shape you get?

Hi JohnBlade,

Sure. Is this what you mean?



Run Simulation

Regards,

VIDBID