Analysis of the WITTS Generator

[Stephen Brown]

Working

Vidbid,
Thanks for the great posts of the Zimmerman patent.
It does look a whole lot like the QEG.
Seeing the QEG working even being driven by another motor is vindication that the design functions and that it is similar to WHITTS.
I had my doubts that a generator with no permanent magnets would/could even function in this configuration.
Even with the cap bank as the energizing force it seems to be creating and sustaining its own internal flux lines.
It is definitely using the flux lines as Ed Leedskalnin described in his magnetic place holder experiment.
It's still a mystery to me how this design functions at all.
The mica caps around the ends of the poles are curious. Could this be flux containment.

We'll see how much energy above driving the motor they can really achieve.

This is a great way to prove this designs legitimacy.
Have a third construct and test the design.

Toward a new free energy tomorrow.

[vidbid]

Vidbid,
Thanks for the great posts of the Zimmerman patent.
It does look a whole lot like the QEG.
Seeing the QEG working even being driven by another motor is vindication that the design functions and that it is similar to WHITTS.
I had my doubts that a generator with no permanent magnets would/could even function in this configuration.
Even with the cap bank as the energizing force it seems to be creating and sustaining its own internal flux lines.
It is definitely using the flux lines as Ed Leedskalnin described in his magnetic place holder experiment.
It's still a mystery to me how this design functions at all.
The mica caps around the ends of the poles are curious. Could this be flux containment.

We'll see how much energy above driving the motor they can really achieve.

This is a great way to prove this designs legitimacy.
Have a third construct and test the design.

Toward a new free energy tomorrow.

My pleasure, Stephen.

I found a German explanation of the QEG's operating principles:

https://www.youtube.com/watch?v=3O7yxhlTPD8

Meine Deutsch ist nicht so gut.

So we need a translation, no doubt.

Regards,

VIDBID

[vidbid]

Hi Vidbid,
thank you for your permanent work here.
I was reading the Tesla patent which was given with the QEG plans and came to the conclusion, there is something wrong. It is not related to the QEG at all...
The patents are showing up now seem to do this much better. Will have to read a wee bit more about it.
I was talking to a small number of friends the last few days, we are going to build on of these generators, just checking out the possibilities we have in our different workshops. It is more expensive than I thougt as for example the right steel sheet is quite dear. Lasering would be no problem and rather cheep to get. Winding of the coils by hand is probably not a good idea, just checked even the mass of the copper, Jesus, that's a lot.
The offer you got seems now not bad to me, 3000 bucks for the whole body with core and coils....
Keep you informed about the fortgoing process..
Regards
Gizeh

Your welcome, Gizeh.

Right!

James M. Robitaille wrote two publications:

1. The QEG User Manual - http://hopegirl2012.files.wordpress....al-3-25-14.pdf - which reference patent #511,916 - https://www.google.com/patents/US511916?dq=511916

and

2. QEG New Paradigm Distribution Guidelines -
http://hopegirl2012.files.wordpress....guidelines.pdf - which references patent #390,414 - https://www.google.com/patents/US390414?dq=390,414

Not long after I first downloaded the QEG User Manual, I printed it out. Being interested in Tesla's patents, I download and printed the patent listed in the manual and thought to myself, "How does this apply to the QEG?"

I decided to do some more digging and found the older document, entitled, QEG New Paradigm Distribution Guidelines, and it had the "Best Available COP" designation. I figured that this was the right patent.

I'm surprised that woopy hasn't yet slapped a QEG together out of odds and ends. I hope to see a video any day now.

Regards,

VIDBID

[vidbid]

This Week in Free Energy - QEG- 3/28/2014

This Week in Free Energyâ„¢ -- March 28, 2014: H-Cat Report; QEG - YouTube

This Week in Free Energy; March 28, 2014

references the QEG

Regards,

VIDBID

[vidbid]

QEG Parts List

QEG Parts List: Different formats:
1. Microsoft Excel (xlsx)
2. OpenDocument format (.ods)
3. PDF document (.pdf)
4. Comma-separated values (.cvs)
5. Tab-separated values (.tvs)
6. Web page (.htm)

https://docs.google.com/spreadsheet/...rive_web#gid=0

Regards,

VIDBID

[vidbid]

Luxemburg QEG Website

Links zum Thema

Regards,

VIDBID

[vidbid]

QEG Social Media

Facebook:

https://www.facebook.com/FixTheWorldOrganization

https://www.facebook.com/pages/LadyD...12625622193264

https://www.facebook.com/The.New.Ear...?stream_ref=10

Twitter:

https://twitter.com/LadyDragon13

Regards,

VIDBID

[vidbid]

QEG Parts Suppliers

Inverter:

http://www.power-one.com/sites/power...00-tl_en_0.pdf

Capacitors:

FPG86N0255J-- AVX | Mouser

to be continued..

Regards,

Vidbid

[ZeroMassInertia]

Can the QEG core be reenginered for a easy build?

This is a question and answer from the QEG sight.
Q: Has anyone seriously considered winding a core by hand? Maybe with a small team to take turns, pun
Intended. Tedious but cheap. How practical/impractical would it be to achieve for a one off?
A: you cannot wind by hand - we tried - impossible. The wire must be continuous so you have to squeeze the spool through the hole in the stator over 10,000 times - and it has to be perfect - only a machine will do this.

So can the core, (stator) be reengineered for an easer build?

Many transformers have split cores to make winding faster and more economical, CRT high voltage hi frequency Fly back transformers have split cores and function well. The QEG sight claims they are not experiencing any high temps .So a redesign of the core may be needed.

[Joit]

My pleasure, Stephen.

I found a German explanation of the QEG's operating principles:

https://www.youtube.com/watch?v=3O7yxhlTPD8

Meine Deutsch ist nicht so gut.

So we need a translation, no doubt.

Regards,

VIDBID

He doesnt say a lot in that Video, beside that he mentions meyr turtur and bla bla. Before minute 10:00 he describe the Device, 4 Coils, 2 of them exciter coils (upper and lower Coils). Then, as you see at this Picture there, he says that ie a Light bulb emitted its energy into the quantal field, the QEG can "suck" the energy out from it.
At the next picture it shows 2 quotes, 1 from T. Trapp where he says "If 2 (voltage) fields hit eachother at an angel from 90°, then useable power is generated at the weaker field. so so called dominant Energy."
The other one from keely, what says "if 2 circuits comes into resonance, then at the angular point rises a energy excess, what is greater as both sources."
The rest is only about instructions, what you can find at the other Videos here too.

[Joit]

Jonnblade
Yes i agree, it should be possible to wind such a core by hand. You may only got the problems to bring the coils into resonance. It depends on the wire length and thickness. The tuning with the caps is only a small gap what you adjust. They also may suggest to build or buy it that all got the same specs and its easier to see whats wrong, when a device doesnt show resonance.
But S.M made his Devices by hand too, if you work carefully and can fix some things easy by your own, i think then most peoples could make the same thing at other scales.

[vidbid]

Vidbid's Modification to the Zimmerman Patent



Starting to look at the Vibrating Coils / Cap Bank Circuit.

Regards,

VIDBID

[Joit]

Not quite right, your diagramm.
Point B at the rotor is actually the zero line at the diagram.
When a pole is in the center of a coil, the sinewave is at its maximum.
When the opposite pole is in the center of the coil it creates the opposite waveform. So north pole for a positive and south for a negative wave, but it depends how you have your clips.

[vidbid]

Collapsing Field from Output Coils

Not quite right, your diagramm.
Point B at the rotor is actually the zero line at the diagram.
When a pole is in the center of a coil, the sinewave is at its maximum.
When the opposite pole is in the center of the coil it creates the opposite waveform. So north pole for a positive and south for a negative wave, but it depends how you have your clips.

Joit,

Thank you for your B at Zero suggestion. I had earlier thought of it, but thought it was wrong until I realized the output coils could generate energy from their collapsing fields.



So, I think the quantum energy comes from the collapsing field of the output coils.

Regards,

VIDBID

[vidbid]

WITTS Generator / QEG





It's beautiful.

Regards,

VIDBID

PS: By the way, if you really want to make a donation, that Bitcoin address is 1CCzGib97ATi9qkr6vjDRJ9HMzAuqYWYWz