Quantum energy generator

[Franco malgarini]

A open source project:

http://hopegirl2012.files.wordpress....al-3-25-14.pdf


_________________________
Autocostruzione

[john_g]

Hi

Does anyone understand how this generates? The construction details of the spark-gap and exciter coil seems to be missing.

Regards

John

[niven]

free energy



Additional info can be found here:

free energy

[Flattlander]

I am curious about this because it is supposed to be a working generator that can meet the electrical needs of an average household. The point is that they want as many people as possible to download the plans and build their own generators and spread the word to get it out there and get free energy to people everywhere. So my question is, is this really a working generator and would it be worth it to find someone to help me build one. I am as much of a lay person as anyone could possibly be!!!

[prembold]

Quantum Energy Generator - They are claiming 1KW in 10KW out -
looking over the pdf it seems to be very similar to the WITTS Generator.

Wasn’t able to find a lot of information on this but if you have an extra 1 hour 48 minutes, this is an interesting youtube:

the youtube makes reference to Tesla patent 390414 and the manual refers to 551916 so it does make one wonder if they are just using Tesla's name as a draw to hawk their idea; but we live in hope for HopeGirl587.

IF your inclined to help fund her idea, check out Bring Quantum Generators to the World! by Hope Moore - GoFundMe

Looked for independent verification ... I couldn't find anything ... but I like the idea

[Hrothgar]

I'm a layman too

and tho working on a different angle I'm trying to research a generation method that can be built in the base demonstration form with mostly off the shelf materials and a few online pieces. I believe if you can get a simple inexpensive starter generator it can get the more involved ones more validation so that people will believe enough to invest in them.

[sprocket]

I am curious about this because it is supposed to be a working generator that can meet the electrical needs of an average household. The point is that they want as many people as possible to download the plans and build their own generators and spread the word to get it out there and get free energy to people everywhere. So my question is, is this really a working generator and would it be worth it to find someone to help me build one. I am as much of a lay person as anyone could possibly be!!!

Bear in mind that this operates at 400Hz - volts may be right but the frequency is all wrong, so you can't just hook it up to your household supply via a grid-tie. As it stands, it could only be used in isolation. But if it works, who cares!

[Joit]

Bear in mind that this operates at 400Hz - volts may be right but the frequency is all wrong, so you can't just hook it up to your household supply via a grid-tie. As it stands, it could only be used in isolation. But if it works, who cares!

You can transform the frequency too, if you want to, but i dont think you need to. Most things dont depend on the Frequency, they maybe got only more losses. But when it doesnt matter how much energy you have, you dont need to care a lot.
AC motors are the exeption, they depend on it. But a lot things allready run all on DC.

[sprocket]

You can transform the frequency too, if you want to, but i dont think you need to. Most things dont depend on the Frequency, they maybe got only more losses. But when it doesnt matter how much energy you have, you dont need to care a lot.
AC motors are the exeption, they depend on it. But a lot things allready run all on DC.

Frequency transformation, yes, possible but very expensive to do when there's KW's involved. I've never looked into it but I guess you'd need to go the 400Hz -> DC -> 50Hz route - a good 10Kw pure-sine inverter would probably cost $1000 alone! True, a lot of stuff isn't frequency-dependent but a lot still is. And apart from your alarm clock possibly running 8 times too fast, I would also guess that anything with an 50Hz transformer wouldn't work efficiently. But my point was that you cannot hook a 400Hz generator up to the household wiring WHILE STILL CONNECTED UP TO THE 50/60Hz SUPPLY PROVIDED BY THE POWER COMPANY. This may be obvious to you but not to your average user.

True story, I was walking down the street one day when a lady caught my arm and almost pleaded with me for assistance - I quickly realised why! It happened that her car wouldn't start and another 'Good Samaritan' was trying to jump-start it for her. Although there was smoke coming from the jump-leads, he continued to put the leads on in-reverse - the lady knew it was wrong, I knew it was wrong, but this guy seemed oblivious - I was gob-smacked! What is obvious to some is not obvious to all.

[Ben2503]

Fantastic initiative

I think this is the way to go, make a good design public, so that everybody can use it.
I want a 40 KW unit so that I can deliver power to the grid and instead of paying, start earning money. :finger dance:

Bear in mind that this operates at 400Hz - volts may be right but the frequency is all wrong, so you can't just hook it up to your household supply via a grid-tie. As it stands, it could only be used in isolation. But if it works, who cares!

Hi Sprocket.
Where did you get the frequency info from?
did anybody see a testreport or video?

[Beamgate]

@Ben

It's right on the schematic (across L1/L2 symbology as I recall).

[energicjoe]

From the downloaded material:

"We would like to dedicate the success we’ve experienced to our first teacher, Sir Timothy Thrapp, and WITTS Ministries, without whose guidance none of this would be available so soon. We acknowledge and honor the work WITTS has done for over 200 years bringing technology forward, and hope that you will consider making a donation to the ministry for their great work".

No wonder the device looks very similar to "Analysis of the WITTS Generator" in other thread...

[ewizard]

With 10Kw to play with there are lots of ways to deal with the 400Hz factor. Not that big of a problem IMO.

I received a personal email from Thrapp a couple years ago asking me for some suggestions. Maybe they have finally decided it's time to share the secret of their device and I'm guessing the engineer who built the QEG got close enough to them to convince them to finally cut loose of the secrets.

From PESN via overunity.com:

From PESN regarding the Quantum Energy Generator:

"[8:00:18 PM] Hope Moore: Yes we have a working prototype.

[8:01:02 PM] Sterling D. Allan: Thx for writing. I'll add that to the page. Can you tell me what the longest it's run for?

[8:01:06 PM | Edited 8:01:27 PM] Hope Moore: We just finished it and gave away the plans to the whole world for free. Any engineer can build one.

[8:01:48 PM] Sterling D. Allan: I was impressed with the detail in the plans, though I've not had time to digest it closely.

[8:03:52 PM] Hope Moore: The important thing to understand here is that we got it to produce raw power. And we did it in 5 months. It is now open sourced so anyone will be able to make improvements and humanity will co develop it together.

[8:05:33 PM] Sterling D. Allan: Do you know of anyone who has been able to replicate it per the plans yet? (I know you just posted them publicly, but perhaps you had earlier drafts available privately before.)

[8:07:37 PM] Hope Moore: No. We kept everything confidential until we open sourced a few days ago. We suspect that in about 3 months time QEGs will start popping up everywhere. We are now here in Taiwan in a factory with 30 students teaching them to build QEGs. In two weeks we will be in Morocco doing the same thing.

[8:08:41 PM] Sterling D. Allan: Way to go. Wishing you the best. This news certainly has created a lot of hopeful buzz.

[8:10:18 PM] Hope Moore: Our main concern is getting a simple practical free energy design into the hands of the people. So at the moment we are not focusing our energy on "proving it works". We know it works. We are focusing our energy on teaching others and giving them back the power to build these. Because of this grassroots effort, it will be unstoppable.

[8:14:10 PM] Hope Moore: We are a small family and organization with very little resources, so we do the best we can and all the attention (especially the death threats) have made me protective of my family."

[energicjoe]

QEG Post Open Source Important Update | HOPEGIRL BLOG

QEG Post Open Source Important Update

On March 25 2014 the QEG exploded overnight. Currently our family is traveling with an intense schedule of QEG training so we will be doing our best to keep up with the overflow of inquiries while on the road.

In the first 24 hours of open sourcing, over 20,000 people downloaded the QEG manual. We just received word from one of the core suppliers that they are getting so many orders for QEG cores that they need help handling it. We would ask that if you are interested in ordering a QEG core from Polaris and Torelco that you please email FTW here: QEGcoreorders@hotmail.com. We will process your orders for you and send them in batches to Polaris and Torelco to streamline the process and help get the best price.

In your email for core orders please include:

How many cores you need
If you want a bare or processed core
Where they need to be shipped to

Also if you are interested in setting up an appointment for consulting with FTW in May please email us here: QEGconsultation@hotmail.com

We are assembling the admin team needed to help with this process now.

More information will come as soon as we are able to get to it. Have fun building QEG’s and liberating the planet!!!

Much Love,

Hope

[vidbid]

Greetings from VIDBID

Greetings, one and all:

Congratulations to the author(s) and publisher(s) of the QEG user manual.

I hope you all won't mind if I shamelessly plug my report (if you could call it that) and my thread:

http://www.energeticforum.com/renewa...generator.html

Analysis of the WITTS Generator, Version 1.0.2, was initially released on February 8, 2014 with the creation of this thread, two days before the publication of the QEG distribution guidelines document written by James M. Robitaille, et al, dated February 10, 2014.

Version 1.0.7.D

Released on February 14, 2014

Download Your Free Copy

Two possibilities exist with respect to the above device.

One: It's a fake.

Two. It might be real.

For all of those who believe it's a fake, I say to you, “Congratulations. You're done. Perhaps, it's possible for you to realize that there is no need for you to try to convince others to believe as you do. I would like to suggest that as long as you securely believe that the device is fake and you're okay with believing that, then that should be enough for you; however, if you're not satisfied with that suggestion, then I suggest you write and publish your own ideas as to why the device is a fake.”

The other possibility exists that the device might be real. If the device is not a fake but real, how would such a device be constructed? What might be its operating principle?

Regards,

VIDBID