COP 20.0 (2000%) Demonstration

[Aaron]

tomorrow live call with Jim and Paul

Just sent notice to the member's list for Jim and Paul's presentation.

Live call tomorrow night at 7pm pacific timezone.

Check your email for the subject line: Live Q & A call with Jim Murray & Paul Babcock Tomorrow Night!

[Mario]

Hi Aaron,

it's unfortunate you do this in the evening as it will be in the middle of the night for me (+1 zone), but I understand since you're US based. I've got a bad flu so I really don't know if I will be able to make it. I'll try as I really wanted to ask Jim and Paul a few questions.

I'll post a few shortly.

Will you record the call?

regards,
Mario

[Khwartz]

Just sent notice to the member's list for Jim and Paul's presentation.

Live call tomorrow night at 7pm pacific timezone.

Check your email for the subject line: Live Q & A call with Jim Murray & Paul Babcock Tomorrow Night!

Well received, thanks Aaron.

Hi! Mario, I am +2 too! ^_^ (France, summer saving schedule ), are you in England?

BTW, I try to reach the website of Paul's company:http://www.flybackenergy.com, but still I have an error message in return. Can somebody try too and let me now if same problem? :/

[Mario]

Hi Khwartz,

i'm in Switzerland, don't know if I'll make it.

The site is down.

regards,
Mario

[Mario]

Hi Aaron,

here a few questions:

Does the effect work only with certain type of generators? If so, could you please list them. Should it work with a neodymium perm. magnet wind generator?

Where exactly do you switch with respect to the source sine wave?

If we were to mimic a tank circuit with a load in series between cap and coil, we could only have some success if the source voltage would be very high and the impedance-resistance of the load would be very low. I imagine this concept to be true for the SERPS process as well, is this correct?

From experiments, an audio amp or an inverter as a source can't recycle the energy that's sent back, as opposed to a mechanic generator (moving magnets). In your opinion, can this be done with a solid state source?


Observations:

I've been trying to get the SERPS method to work with a 3 phase, 1 KW, perm.magnet rotor generator (wind) using one phase. I have tried all the switching schemes and timings I could think of to make the generator work like a generator for one moment, and like a motor the next. The mosfets switch perfectly, but the generator always slows down.

In order to try and be able to return the power at the beginning of the second and fourth quadrant (sine peak) I have also rearranged the switching so that it puts two wires (one phase of the generator has two wires) in series when charging the cap, and in parallel when returning the power from the capacitor. The generator slows down.

I have tried using matched caps and loads that would get the caps to maximum source voltage and discharge back to 0 volts. I have also tried using big caps that would basically sit at an average voltage during the back and forth switching. The generator still slowed down.

Any comments from Jim and Paul are welcome.

regards,
Mario

[Aaron]

recording the call

Hi Aaron,

it's unfortunate you do this in the evening as it will be in the middle of the night for me (+1 zone), but I understand since you're US based. I've got a bad flu so I really don't know if I will be able to make it. I'll try as I really wanted to ask Jim and Paul a few questions.

I'll post a few shortly.

Will you record the call?

regards,
Mario

Hi Mario,

Yes, I'll record it. It will probably go on Youtube publicly. Much wouldn't make sense to anyone unless they have seen the presentation anyway.

[Khwartz]

Hi Khwartz,

i'm in Switzerland, don't know if I'll make it.

Me too! ^_^

The site is down.

regards,
Mario

isn't strange?
I called the company 2 times but no answer :/

I will ask Aaron about.

Regards too

[Khwartz]

Questions for today calling

Hi Mario,

Yes, I'll record it. It will probably go on Youtube publicly. Much wouldn't make sense to anyone unless they have seen the presentation anyway.

Great Aaron if you can record and make public, don't know too if I will make it for tonight here (4 am).

About the site of Paul's company, do you have any info about why the site is down?

For the question I would like Jim or Paul answer:

• I was very happy to sustain your both great efforts, guys, to bring economical, abundant and clean energy throughout the world. I would be happy to support you both more but if I believe in you guys and help you to succeed in your endeavor, I think it would be rather fair that your sponsors would be rewarded if your companies meet the market and explode their income. Could you provide a way for your sponsors to very simply buy shares of your common company? an offer you would reserve only for those who supported you until now by buying your lectures?
• For the SERPS: I agree that if we send back to the grid the reactive watts, they will make pay us for. What if we put a power transformer (like in industry) just after the energy meter of the grid company and having the SERPS on the secondary side of this transformer? wouldn't be only the net power in terms of active watts, which would consumed on the primary winding of the power transformer? and the reactive watts would only go back and forth between the SERPS and the secondary of the power transformer, having only active watts on the primary (else than the normal reactive power we used to have with this kind of power transformer which may be balanced with caps to correct its own power factor)?
• Could you provide kits (to buy) of your SERPS circuitry, with the schematic and so on?
• What about partnerships to install home or industry power plants in Europe? I am artisan having my own business in electricity installations and fixing, and would be very pleased to promote and spread your technology here, would be for homes than for main power plants to sale the electricity.

Regards,
Didier (Khwartz)

[Aaron]

contacting Paul

Well received, thanks Aaron.

Hi! Mario, I am +2 too! ^_^ (France, summer saving schedule ), are you in England?

BTW, I try to reach the website of Paul's company:http://www.flybackenergy.com, but still I have an error message in return. Can somebody try too and let me now if same problem? :/

I would recommend not trying to contact Paul through his company. They are much too busy with their company business to be answering questions about all of this. That is why we want to do these calls.

[Aaron]

questions

Mario and Khwartz - I printed your questions and will ask Jim and Paul.

[Khwartz]

Thanks Aaron.

Until now I am still awaken.

For not contacting Paul's company directly, I can understand they are very busy, probably as I am with my own business. But do they look for partners and investors or not? If yes, could be better they can receive and answer communcations coming to them in this purpose. I wouldn't like to get tired to try to help and never have any response...

Regards and nice to hear you in 1 hour (am I right), on phone, Aaron.

[Dog-One]

Paul's Compnay Website

May want to let Paul know his website is kaput:


Unable to connect to database.
A database error occurred while processing this request.

Catchable fatal error: Argument 1 passed to ConfigStore::__construct() must be an instance of Database, null given, called in /home/brentcarey/flybackenergy.com/updates/concrete5.4.2.2/concrete/models/config.php on line 48 and defined in /home/brentcarey/flybackenergy.com/updates/concrete5.4.2.2/concrete/models/config.php on line 136

[Khwartz]

The call with Jim and Paul

Thanks again to you Aaron and to Jim and Paul.

That was for me a Great Privilege to have these Humanitarian Inventors in direct communication.

May "The Big Money" coming to all of you so you could have all the Financial Energy to achieve your projects and and take maximum of Pleasure in your own life, to reward you for what you've done and your are doing.

Best regards,
Didier

[Aaron]

website

Dog-one, thanks - yeah they've had some web problems for a while but after the recently moved to a larger facility, they haven't had time to deal with it. They're so swamped they actually don't need one. I'll talk to Paul and see if I can help them with a basic site - I don't make pretty sites, but they work. lol

[Aaron]

Serps

Thanks again to you Aaron and to Jim and Paul.

That was for me a Great Privilege to have these Humanitarian Inventors in direct communication.

May "The Big Money" coming to all of you so you could have all the Financial Energy to achieve your projects and and take maximum of Pleasure in your own life, to reward you for what you've done and your are doing.

Best regards,
Didier

Thanks Khwartz,

that was a really good call - glad Barry from the UK asked so many questions. Good to hear from a few people like Mario too who are actually working on the experiments with these principles.

Anyone else here that was on the call?