SSG modes COP

[nilrehob]

A few weeks ago I finally figured out the common standard ordinary mainstream textbook theory what makes the Tesla-switch so interesting.
Then yesterday I watched a presentation by Peter Lindemann where he mentioned the Bedini SSG generator-mode.
After some calculations I came up with the following COP for some different SSG-modes:

Std SSG: 50%
Gen Mode: 66%
Ossie/TS Mode: 75%
Mixed Mode: 80%

A short presentation of the theory:
https://www.youtube.com/watch?v=fo1RsJ0ym2Y

A previous video comparing Std SSG vs Ossie/TS Mode in a real life experiment:
https://www.youtube.com/watch?v=_eh5pQpNsGM

/Hob

[BroMikey]

Cop

Hi Hob

Part 22 John tells the secret of COP 10 and higher. In the ENERGY FROM THE VACUUM series HOWARD JOHNSONS "MAGNETIC GATES are the key to study.

The magnets must have specially shaped fields using compound magnetic arrays like Howy used.

Then you will have more than a simple beginner SSG.

Mike

A few weeks ago I finally figured out the common standard ordinary mainstream textbook theory what makes the Tesla-switch so interesting.
Then yesterday I watched a presentation by Peter Lindemann where he mentioned the Bedini SSG generator-mode.
After some calculations I came up with the following COP for some different SSG-modes:

Std SSG: 50%
Gen Mode: 66%
Ossie/TS Mode: 75%
Mixed Mode: 80%

A short presentation of the theory:
https://www.youtube.com/watch?v=fo1RsJ0ym2Y

/Hob

[nilrehob]

Experimental update at:
https://www.youtube.com/watch?v=7MhPPuYuGwc

/Hob

[nilrehob]

This is my multi-mode circuit I use for easier comparison:
https://2f0f5746-a-62cb3a1a-s-sites....experiment.png

/Hob

[Matthew Jones]

Question: L1 is primary the coil and L2 is your trigger?

What switch closed equals the 4 listed circiuts in first post? Standard, Gen Mode, Ossie, Mixed.

Thanks
Matt

[nilrehob]

Question: L1 is primary the coil and L2 is your trigger?

Yes

What switch closed equals the 4 listed circiuts in first post? Standard, Gen Mode, Ossie, Mixed.

Thanks
Matt

Functions below

/Hob

[Matthew Jones]

Thanks Hob, I'll mess with it a bit.

Have you run your 10 coiler this way? I might give it shot.

Matt

[BroMikey]

Hob

A few weeks ago I finally figured out the common standard ordinary mainstream textbook theory what makes the Tesla-switch so interesting.


A short presentation of the theory:
https://www.youtube.com/watch?v=fo1RsJ0ym2Y

/Hob

Hi Hob

I am listening and seeing all the post, but I am a nubee so I need this video of you. This is why I keep answering you on this teaching video. I have been around for years and no one has taught anything like this because they are all busy with something else and most are inventors.

You seem like both, teacher AND inventor/Engineer. This is good for me because I know very little except what I can pick up on my own.

I was on some other groups and everyone says that the CIRCUIT itself has a COP less than 100 percent BUT the magic energy just miraculously shows up in the battery to save the world and so on. Gotta throw that one in there.

Now let's go back to your THEORY PRESENTATION. I had heard of all of these modes but never really thought about an easy way to quantify this. In each diagram we have batteries and at least one coil.


I have built the SSSG 14awg wire 4 strand, this ran in std mode for one year til GENMODE was released, so I bought the DVD.(I figured it was time to pay) Got the entire energy from the vacuum.

Well after I switched to Genmode my battery bank charged up faster and with less energy, I think. It was 50 percent more on the input and charging very fast. So I was happy.

This is as far as I know. I am a nubee I enjoy this very much and want to take out the time to let you know how valuable your instructional video's are.


The thing that I picked up in the search for higher COP was from JOHN BEDINI. Of course we all had read the old news how in the 1980's JOHN did this and that, then later JOHN made "THE BIG MACHINE"

I was consumed with finding all of the old information about this BIG MACHINE and little by little I would find a piece here or a piece there. The answer has been hidden, but no more.

John B. talked to TOM B in 2010 and they decided together on TOM B. 80th birthday to let the cat out of the bag, at the conference. This was spoken over a microphone to his audience. PART 22 JOHN B goes over this fact that the STD SSG is not like these bigger machines.


Even John's closest co-workers do not answer these direct questions as to what makes THE BIG MACHINES higher in COP. For the last 4 years since 2010 the answer has been on a DVD PART 22, so buy it and you will see what I mean.

The answer is magnets. @Hob your COP charts are very revealing and are proper for these circuit efficiencies. Of course the changing batteries are the wonder of it all. The energy in the battery changes, then I used ALUM and WOWZEE what an even greater change.

In a nut shell I learned the benefit's of the std SSSG mode how it revived very expensive battery banks but it never ran itself.

COP was always less than 100 percent even though I was told repeatedly that COP could be as high as 110 percent if I used a GEN COIL to recover mechanical energy. Well that was out because I am running the solid state version.

How did John B. get a 10X COP how? I couldn't understand it anyway I cut the cake. So one day I saw PART 22. The people in the conference work asking JOHN "Why are the magnets curved"? John replied many things during the course of this expose.

No one else is permitted to sharing the answer who is on the inside except JOHN himself and it should be that way, I agree. These inside guys had the answer dropped into their laps years ago and it is old news to them. Don't ask.

So John went on to say that his experiments have continued over the years and THE BIG MACHINE is the evolutionary product. John Has tried many many arrangements so don't try to look at one Big Wheel and think they are all the same.


John is constantly switching things around to try. I heard John say he had one of his BIG MACHINES 10 coiler all in series. got me but, that is what he said.

John had super poles But in this board room the leading edge of the magnets were curved Curved inward then I remembered Howard Johnson arced shaped magnet for his train car. Just as I thought of Howard Johnson looking at the Ferris wheel magnets, JOHN says ...........


"Does anyone remember the DVD energy from the vacuum series on Howard Johnson"???

That is the answer for those who can understand it. The COP can be increased other ways possibly, but the way JOHN has done it, is by building magnetic poles that reverse from north to south when hit by an electrically fired coil/magneto.

JOHN said that (Thanks John) as the magnet approaches the pole it uses the magnet to draw it into TDC (TOP DEAD CENTER) where the magnet array like Howard Johnson built will flip over and the same magnet drives the pole away assisting rotation.

BINGO FREE ENERGY!!!! in John's own words.

So another key to higher COP is in learning to build Howard Johnson type poles especially designed version specific for the MONOPOLE application.

Follow your dreams and enjoy the adventure.

Mikey

[nilrehob]

Have you run your 10 coiler this way? I might give it shot.

Only Ossie Mod:
https://www.youtube.com/watch?v=_eh5pQpNsGM

/Hob

[nilrehob]

Hi Hob

I am listening and seeing all the post, but I am a nubee so I need this video of you. This is why I keep answering you on this teaching video. I have been around for years and no one has taught anything like this because they are all busy with something else and most are inventors.

You seem like both, teacher AND inventor/Engineer. This is good for me because I know very little except what I can pick up on my own.

I was on some other groups and everyone says that the CIRCUIT itself has a COP less than 100 percent BUT the magic energy just miraculously shows up in the battery to save the world and so on. Gotta throw that one in there.

Now let's go back to your THEORY PRESENTATION. I had heard of all of these modes but never really thought about an easy way to quantify this. In each diagram we have batteries and at least one coil.


I have built the SSSG 14awg wire 4 strand, this ran in std mode for one year til GENMODE was released, so I bought the DVD.(I figured it was time to pay) Got the entire energy from the vacuum.

Well after I switched to Genmode my battery bank charged up faster and with less energy, I think. It was 50 percent more on the input and charging very fast. So I was happy.

This is as far as I know. I am a nubee I enjoy this very much and want to take out the time to let you know how valuable your instructional video's are.


The thing that I picked up in the search for higher COP was from JOHN BEDINI. Of course we all had read the old news how in the 1980's JOHN did this and that, then later JOHN made "THE BIG MACHINE"

I was consumed with finding all of the old information about this BIG MACHINE and little by little I would find a piece here or a piece there. The answer has been hidden, but no more.

John B. talked to TOM B in 2010 and they decided together on TOM B. 80th birthday to let the cat out of the bag, at the conference. This was spoken over a microphone to his audience. PART 22 JOHN B goes over this fact that the STD SSG is not like these bigger machines.


Even John's closest co-workers do not answer these direct questions as to what makes THE BIG MACHINES higher in COP. For the last 4 years since 2010 the answer has been on a DVD PART 22, so buy it and you will see what I mean.

The answer is magnets. @Hob your COP charts are very revealing and are proper for these circuit efficiencies. Of course the changing batteries are the wonder of it all. The energy in the battery changes, then I used ALUM and WOWZEE what an even greater change.

In a nut shell I learned the benefit's of the std SSSG mode how it revived very expensive battery banks but it never ran itself.

COP was always less than 100 percent even though I was told repeatedly that COP could be as high as 110 percent if I used a GEN COIL to recover mechanical energy. Well that was out because I am running the solid state version.

How did John B. get a 10X COP how? I couldn't understand it anyway I cut the cake. So one day I saw PART 22. The people in the conference work asking JOHN "Why are the magnets curved"? John replied many things during the course of this expose.

No one else is permitted to sharing the answer who is on the inside except JOHN himself and it should be that way, I agree. These inside guys had the answer dropped into their laps years ago and it is old news to them. Don't ask.

So John went on to say that his experiments have continued over the years and THE BIG MACHINE is the evolutionary product. John Has tried many many arrangements so don't try to look at one Big Wheel and think they are all the same.


John is constantly switching things around to try. I heard John say he had one of his BIG MACHINES 10 coiler all in series. got me but, that is what he said.

John had super poles But in this board room the leading edge of the magnets were curved Curved inward then I remembered Howard Johnson arced shaped magnet for his train car. Just as I thought of Howard Johnson looking at the Ferris wheel magnets, JOHN says ...........


"Does anyone remember the DVD energy from the vacuum series on Howard Johnson"???

That is the answer for those who can understand it. The COP can be increased other ways possibly, but the way JOHN has done it, is by building magnetic poles that reverse from north to south when hit by an electrically fired coil/magneto.

JOHN said that (Thanks John) as the magnet approaches the pole it uses the magnet to draw it into TDC (TOP DEAD CENTER) where the magnet array like Howard Johnson built will flip over and the same magnet drives the pole away assisting rotation.

BINGO FREE ENERGY!!!! in John's own words.

So another key to higher COP is in learning to build Howard Johnson type poles especially designed version specific for the MONOPOLE application.

Follow your dreams and enjoy the adventure.

Mikey

Thanks Mikey.

/Hob

[ET-Power]

Hi Hob

I am listening and seeing all the post, but I am a nubee so I need this video of you. This is why I keep answering you on this teaching video. I have been around for years and no one has taught anything like this because they are all busy with something else and most are inventors.

You seem like both, teacher AND inventor/Engineer. This is good for me because I know very little except what I can pick up on my own.

I was on some other groups and everyone says that the CIRCUIT itself has a COP less than 100 percent BUT the magic energy just miraculously shows up in the battery to save the world and so on. Gotta throw that one in there.

Now let's go back to your THEORY PRESENTATION. I had heard of all of these modes but never really thought about an easy way to quantify this. In each diagram we have batteries and at least one coil.


I have built the SSSG 14awg wire 4 strand, this ran in std mode for one year til GENMODE was released, so I bought the DVD.(I figured it was time to pay) Got the entire energy from the vacuum.

Well after I switched to Genmode my battery bank charged up faster and with less energy, I think. It was 50 percent more on the input and charging very fast. So I was happy.

This is as far as I know. I am a nubee I enjoy this very much and want to take out the time to let you know how valuable your instructional video's are.


The thing that I picked up in the search for higher COP was from JOHN BEDINI. Of course we all had read the old news how in the 1980's JOHN did this and that, then later JOHN made "THE BIG MACHINE"

I was consumed with finding all of the old information about this BIG MACHINE and little by little I would find a piece here or a piece there. The answer has been hidden, but no more.

John B. talked to TOM B in 2010 and they decided together on TOM B. 80th birthday to let the cat out of the bag, at the conference. This was spoken over a microphone to his audience. PART 22 JOHN B goes over this fact that the STD SSG is not like these bigger machines.


Even John's closest co-workers do not answer these direct questions as to what makes THE BIG MACHINES higher in COP. For the last 4 years since 2010 the answer has been on a DVD PART 22, so buy it and you will see what I mean.

The answer is magnets. @Hob your COP charts are very revealing and are proper for these circuit efficiencies. Of course the changing batteries are the wonder of it all. The energy in the battery changes, then I used ALUM and WOWZEE what an even greater change.

In a nut shell I learned the benefit's of the std SSSG mode how it revived very expensive battery banks but it never ran itself.

COP was always less than 100 percent even though I was told repeatedly that COP could be as high as 110 percent if I used a GEN COIL to recover mechanical energy. Well that was out because I am running the solid state version.

How did John B. get a 10X COP how? I couldn't understand it anyway I cut the cake. So one day I saw PART 22. The people in the conference work asking JOHN "Why are the magnets curved"? John replied many things during the course of this expose.

No one else is permitted to sharing the answer who is on the inside except JOHN himself and it should be that way, I agree. These inside guys had the answer dropped into their laps years ago and it is old news to them. Don't ask.

So John went on to say that his experiments have continued over the years and THE BIG MACHINE is the evolutionary product. John Has tried many many arrangements so don't try to look at one Big Wheel and think they are all the same.


John is constantly switching things around to try. I heard John say he had one of his BIG MACHINES 10 coiler all in series. got me but, that is what he said.

John had super poles But in this board room the leading edge of the magnets were curved Curved inward then I remembered Howard Johnson arced shaped magnet for his train car. Just as I thought of Howard Johnson looking at the Ferris wheel magnets, JOHN says ...........


"Does anyone remember the DVD energy from the vacuum series on Howard Johnson"???

That is the answer for those who can understand it. The COP can be increased other ways possibly, but the way JOHN has done it, is by building magnetic poles that reverse from north to south when hit by an electrically fired coil/magneto.

JOHN said that (Thanks John) as the magnet approaches the pole it uses the magnet to draw it into TDC (TOP DEAD CENTER) where the magnet array like Howard Johnson built will flip over and the same magnet drives the pole away assisting rotation.

BINGO FREE ENERGY!!!! in John's own words.

So another key to higher COP is in learning to build Howard Johnson type poles especially designed version specific for the MONOPOLE application.

Follow your dreams and enjoy the adventure.

Mikey

Thanks Mikey! ! !

From what has been shared with me, non-linear magnetic fields is where it is at.

From my understanding of what has been shared there are numerous ways to achieve this... one would definitely be shaping the magnets... another would be shaping the coils... another would be augmenting the coils and magnets in a non-symmetrical way.

Is this your understanding and experience as well?

For reference, JB used two different types of magnets for his ferris wheel, he also had to two outer coils not even with one another, and he also had the metal plates on the center large coil to "shape the field"

Anything else you (and others) could share on non-linear fields and ways to increase the COP?!?!?!!

Thanks, enjoy!

[pault]

A few weeks ago I finally figured out the common standard ordinary mainstream textbook theory what makes the Tesla-switch so interesting.
Then yesterday I watched a presentation by Peter Lindemann where he mentioned the Bedini SSG generator-mode.
...
https://www.youtube.com/watch?v=_eh5pQpNsGM

/Hob

Interesting! I was just re-watching that presentation (sg sdv, 2014 conf), also.
I feel that my intuition isn't as well-developed as yours. I would be grateful if you could tell me more about your revelations or what sort of "textbook" stuff you read. thanks
pt