BiTT OverUnity Transformer Bi-Toroid Thane H. Bill A.

[Dog-One]

I understand a bit of Russian.

You do aay? Can you help with this video?

https://www.youtube.com/watch?v=bo42dHgrJ6g

Closed caption translation leaves a lot to be desired.

[BroMikey]

NetePete45 response

Here is neatpete's response to my post to him

First me then Pete


Hi Pete
Good Man , now listen to this. You may get better or worse COP results from input output multiplications but your phase will shift over on you and without the COS of the phase angle you would be fooled. Yes I see all your videos on the scope for the scopians

Unless you have a 2 channel scope (Obviously you do) you can't get the phase angle of the PRIMARY. Forget the secondaries, watch that PRIMARY especially when loading you will see it shift with every alteration to the circuit. Yes a resistive load is the best and diodes are not resistors only.

The filament bulbs are what we all use, as instructed in the BiTT plans.

Also tuning with caps may improve voltages on the output but don't run the phase angle to far. Try to keep the phase angle shift closest to 90 degrees. This will give you the best results.

Michael Central USA




Hi Michael.
I deleted the video because there were some issues with 180 out of phase. The unit switches at the drop of a hat just like you said it would. I have purchased some 1 ohm ceramic resisters, hope they are the right ones for testing. The guy at the electronics shop had no idea of what I was talking about when I asked him for current sensing resisters. LOL. I have come to a stand still with things because I do not have a variac so I will have to make one or spend another $250 on one. Will have to consider my options before going ahead.

[BroMikey]

Here is another OVER-UNITY TRANSFORMER

https://www.youtube.com/watch?v=X-JC99uqQEU

[BroMikey]

1929 bi-toroidal transformer Patent

https://www.youtube.com/watch?v=FvV40BWgByw

[BroMikey]

BiTT testing

https://www.youtube.com/watch?v=DCti5C1Rqjw

[kEhYo77]

BiTT setup FINISHED!

Hi.

Finally I have just finished wiring my BiTT setup!
Testing soon so stay tuned...

[BroMikey]

Hi.

Finally I have just finished wiring my BiTT setup!
Testing soon so stay tuned...

Yeah that is so nice. I like your setup a lot. You have put forth much effort.

I look forward to your results and measurements. I like your choice of bulbs.

Mikey

[Doogy2Shoes]

C cores are very cheap things to get, especially from Alibaba suppliers who are sometimes even willing to send custom made free samples (if you can convince them you'll be buying many).

In my opinion this effect remained for too long in the mW and perhaps slight W range. Noone has ever took this to even near kW range due to core and design limitations. This could be easily solved by using cut low loss amorphous C-cores that are readily available. Attached is such design example.

What this design doesn't show is the extra cut line, so essentially the C core is cut in half again in order to facilitate the insertion of the coil AND the equalization of the reluctance of the flux path.

thanks for putting that forward. Any developments on this application
of cut low loss amorphous C-cores? this sounds intriguing, does
anyone have any thoughts on this?

[BroMikey]

Bill Alek research work website

Multi-Spark Gap Experiments

[BroMikey]

OverUnity transformer by Marc

https://www.youtube.com/watch?v=uIk_24tOAf4

[BroMikey]

Flux switch transformer

https://www.youtube.com/watch?v=SoA_5n-n56E

[BroMikey]

BiTT

Upload

5:48 / 6:00
Bi-toroid Transformer replication (over unity transformer)
Naoki Kashima
Naoki Kashima
382
1,822
Published on Jun 30, 2015

In this video I explore the bi-toroid transformer. The transformer has 2 secondary coils and 1 primary. This gives the magnetic flux an alternate route to travel. When the two secondaries are under load you'll be using less power than if just 1 secondary was under load! This does mean that the transformer is operating at over 100% efficiency. I was not the first person to discover this. I will provide links to other videos of people who managed to replicate this effect.

Here is a video by Thane Heinsvideo the bi-toroid transformer is explained using mathematics: https://www.youtube.com/watch?v=IdL5E...

Here is a video by theENERGYDREAM titled "377% efficiency bi-toroid transformer": https://www.youtube.com/watch?v=aVYiT...

Category
Science & Technology
License
Standard YouTube License

All Comments (34)
Share your thoughts
Marcus Yang-Nilsson 1 week ago
I'm a noob on this so I have some beginners questions:

1. What does the "over unity" term actually suggests?
2. What is the power input in WATTAGE and output WATTAGE delivered?
3. Where is the power source?
4. Why isn't this commercially used?

Sorry for stupid questions, just curious because it is either sensational or something else....

Thanks in advance!
Read more
·

Naoki Kashima 1 day ago
+Marcus Yang-Nilsson Hello. 1) the term 'over unity' suggests that more power is coming out of the system than is being put into it. Most people believe that this observation defies the laws of conservation of energy. I was never a big fan of those laws anyways. 2) My power source DC Nokia Phone charger its 5.9 volts @ 400 mA, so that's 5.9 v X 0.4 mA = 2.36 Watts (input), my output is two 5 watt Led lights and another 5 watt Led Light in the middle (15 Watts total), but when the secondaries are being used by themselves (10 Watts). This is actually a modification of the patent CA 02594905A1 (it is a Canadian Patent by Thane Heins. I know that lighting a few bulbs with lower wattage isn't that impressive (joule thief circuits do it), what is impressive with this setup that is it will step up voltage AND amperage at the same time and keeping the same wave frequency. If I added another loop connecting the two secondary coils together it would work even better! Your last question was "why isn't this commercially available". The answer would apply to the following as well: Why isn't Stan Meyer's water-powered car commercially available, or GDS water-powered generator, or Howard Johnson's self running magnetic motors, etc... THE REASON is $. BIG OIL is just too damn profitable right now. Technology to replace oil was available 100 years ago when Tesla finished the Wardenclife Tower. It is up to the average people to make a difference. If not now than when?








Bi-toroid Transformer replication (over unity transformer)



[VIDEO]https://www.youtube.com/watch?v=e2p58tWIxNc[/VIDEO]



Published on Jun 30, 2015

In this video I explore the bi-toroid transformer. The transformer has 2 secondary coils and 1 primary. This gives the magnetic flux an alternate route to travel. When the two secondaries are under load you'll be using less power than if just 1 secondary was under load! This does mean that the transformer is operating at over 100% efficiency. I was not the first person to discover this. I will provide links to other videos of people who managed to replicate this effect.

Here is a video by Thane Heinsvideo the bi-toroid transformer is explained using mathematics: https://www.youtube.com/watch?v=IdL5E...

Here is a video by theENERGYDREAM titled "377% efficiency bi-toroid transformer": https://www.youtube.com/watch?v=aVYiT...

[BroMikey]

BiTT Part 2 Operates at Infinite Efficiency Proves

Energy Can Be Created...

[VIDEO]https://www.youtube.com/watch?v=yY_Jl7pC0_E[/VIDEO]




Thane Heins 8 months ago
Bi-Toroid Transformer (BiTT) Patent: Patent US20140253271 - Bi-Toroidal Topology Transformer - Google Patents
BiTT Replication France: BiTT JLN Labs_Report Independent Third Party Test FRANCE
Dr. Fusina Defence Research and Development Canada Independent BiTT Test Data:
BiTT Test Dr. Fusina Defence Research and Development Canada Bi-Toro?
Kurt's DC Powered BiTT: 39C Bitoroid For HV Resonant Drive Transformer, Tune and Testing - YouTube

[BroMikey]

Billy Bad Boy Transformer Thane, another God awful home-run dude.

Atta Boy Thane kickin butt and takin names.

It ain't over til it's over. Look out world.

And people say energy can't be created out of thin air.

[VIDEO]https://www.youtube.com/watch?v=k2H5BerC9Go[/VIDEO]

[BroMikey]

No Load and loaded conditions verified. Phase angle scope shots.

[VIDEO]https://www.youtube.com/watch?v=OjHKjmHrSWM[/VIDEO]