The Resonance Energy Device Explained

[John.K1]

Hi Med,

Super, looking forward to see it!!

I am working with one of my friend on the "Analyzing tool" - In short, it is Oscilloscope and signal generator driven by computer with the LabView software (trial full version for 42 days) . My idea is to have two outputs and two inputs. On the outputs it will send all combination of frequencies and DutyCycles, Two inputs from the oscilloscope will be for analyzing and also shown in several ways on the screen. It is almost done. Got a bit trouble with my cheap 2 CH signal generator but we found the solution and by the weekend the software should be ready to use. Than I can analyse most of devices -to find the optimal sweet spot No hours sitting and playing with tuning. Just press a button ad leave it to do its work

BTW- you might like LabView too. It is very easy to program it. Check YouTube

[med.3012]

Hi John !


I am uploading the video at this moment so it's will take about 15 min, this is the first time making a video by English language only as my native language is Arabic , i did a lots of mistakes ! it's 15 min duration discussing the fundamental about the E-TBC ... this is the part 1, i didn't managed to make it only 15 min ! but i have to arrange my ideas for part2 when i will discuss the more complicated phenomena about standing waves formation, and how this device will solve the enigma about the displacement current !

ok here you are the first part, sorry about the unexpected end !

https://youtu.be/y4LiiNTEPhw

[John.K1]

Hi Med. The video and your English is fine. Looking forward o see your nex video.

[med.3012]

Hi John !


thanks ! yes as any new experience it's a bit difficult at first, in reality i am planning to make more video parts.

[med.3012]

Hello everyone,


This is part 2 video about displacement current, why this current don't exist will be understood finally, here you are the video :

https://youtu.be/PyyTv2r1xlY

i just explained the model physically with a few mathematical explanation, the secret depend on the amazing induced electric field and how this field has two portion, one dynamic and the other is static, both together will work in harmony... why this happen inside a capacitor? because the induced field will find a problem and it will solve it !!! i hope this will lead to more understanding about Tesla wireless system, please enjoy the video, the information given is always free and open to the public ... this science isn't a goal in itself but it's only a way of understanding ...

[med.3012]

Hello everyone ,


Just to add something important about the new published idea concerning the new concept of displacement current, the model describe the idea in general but some details is still missed in my explanation, for example the formation of voltage values in the capacitor plates still need another explanation, the following photo was published in my video but i didn't explain how these voltage are formed, the same about my first video about the E-TBC when i missed talking about serial resonance, i hope i could fill the gap as soon as possible.

[BroMikey]

Thanks MED

I can listen to this man think very clearly. I like the video best.

[VIDEO]https://www.youtube.com/watch?v=PyyTv2r1xlY&feature=youtu.be[/VIDEO]

[med.3012]

Thanks MED

I can listen to this man think very clearly. I like the video best.

[VIDEO]https://www.youtube.com/watch?v=PyyTv2r1xlY&feature=youtu.be[/VIDEO]

Welcome BroMikey

[med.3012]

Hello everyone,

i have a question and i would like to share so maybe i could find a better idea or even a solution, the attached drawing show an induced elementary rotating electric field, this is the smallest field can be found, the question is when the field meet a conducting metal surface it will be forced to flow on the surface not inside the metal as discussed, now this circle will be divided into either 1/2 or 1/4 or maybe less ? i guess it will be divided into 1/4, any idea ?

[myenergetic]

Hello everyone,

i have a question and i would like to share so maybe i could find a better idea or even a solution, the attached drawing show an induced elementary rotating electric field, this is the smallest field can be found, the question is when the field meet a conducting metal surface it will be forced to flow on the surface not inside the metal as discussed, now this circle will be divided into either 1/2 or 1/4 or maybe less ? i guess it will be divided into 1/4, any idea ?

Hi There

I am fallowing the thread for quite some time. Regarding the subject at hand to MHO any flat strip conductor has lower skin effect due to high surface area to volume ratio. The inductance of a flat strip can be well estimated by L= .00508l(ln(2l/(w+h)))+.5+(.2235((w+h)/l)) where w is the thickness of the strip and l the length and w the width. The skin effect depth can be well estimated by d=7.5/sqrt(f) in cm where d is the depth and f the operating frequency.

I hope this will help

jj

[med.3012]

Hi There

I am fallowing the thread for quite some time. Regarding the subject at hand to MHO any flat strip conductor has lower skin effect due to high surface area to volume ratio. The inductance of a flat strip can be well estimated by L= .00508l(ln(2l/(w+h)))+.5+(.2235((w+h)/l)) where w is the thickness of the strip and l the length and w the width. The skin effect depth can be well estimated by d=7.5/sqrt(f) in cm where d is the depth and f the operating frequency.

I hope this will help

jj

HI !

Thanks for the contribution, there's a lots of things will happen when we use a large surface wire, in one side it's a capacitor but in the other side it's a coil, skin effect will be reduced, ambient electrons can be collected in radio frequency speed, longitudinal waves will be formed automatically as a part of what called electrostatic induction so using a proportional length will cause an instant tuning ... !
the new concept of displacement current is beautiful even it's really complex, as it show that this current flow in the first capacitor plate starting from all direction but in the other plate it end from all direction, in each side there's no net electric current since the sum = 0

it's not possible to use some known electric equations in a simple form.. because the magnetic field will be affected also by this electrostatic induction !!! the magnetic field will be also forced to follow the induced rotating electric field because the two form the same entity, so it will be shifted to flow outside the plate, the elementary induced electric field circles must close the loop in order to transfer the power from the 1 plate to the 2 plate, logically it have to be divided into 1/4...


Regards

[med.3012]

Possible Medical use of the E-TBC



this is just a proposal ! as i am not specialized in medicine but i think there's a relation between scalar waves and diseases neutralization, in fact a lots of work has being done in this field, but i just remember one Don's Smith saying about the ability of high voltage to kill germ and wonder if he tested his system or no ! i think he tested it but don't like to share the results ... !?

[med.3012]

this posted in

Donald smith devices too good to be true




Hello everyone,


before going so far with Don Smith technology we must realize an unique condition, it imply the attraction of ambient electrons with radio frequency speed, the energy equation of his device look like the famous energy equation :




the above formula is achieved when we divide the atom..., in Don Smith device we must divide the electricity into two equal portion according electrons spin rotation... the device with this ability is the extended Tesla Bifilar coil, this device works against Lenz's law because it's not a closed circuit ... it's an open parallel LC circuit that must pass through serial resonance to continue its oscillation, when it do this both voltage and current are combined to give a useful electric power.

[med.3012]

important info related to this thread can be found in this forum here :


http://www.energeticforum.com/renewa...th-review.html

[med.3012]

hello everyone, back to this thread
some advancement has being done to this system using the mixed E-TBC as primary coil, i was able to light 100w Incandescent light bulb, there's still some technical problems ....

i hope to find some replicators ...so we could share our experience with this system, more info will be provided !