The Resonance Energy Device Explained

[Pidja105]

To achieve resonance in HV, we need to get frequency same as the frequency of the ETBC, in flyback transformer with rectifier diodes, frequency in input to primary will get doubled at the output. If we need frequency of 700Hz, we will input 350Hz to flyback primary(that we wounded on ferrite core), we will use Mazilli to supply flyback with 350Hz by calculating values of capacitor and wounded primary on flyback. On output we will get some sort of DC HV 700Hz pulse, and this is exactly what our ETBC need, direct resonance is achieved. Tesla has this problem because he has not better technology to regulate input frequency, he need to wound very different coils and make very different caps to achieve that. I will try to implement this when new parts for Mazilli come to me(old parts are burnt out), if you can please try this:

1. Calculate frequency of ETBC,
2. See my previous images about Mazilli and frequency output(if your flyback has no rectifier, output will be full sine wave and input frequency will not double, if it has one diode for rectify, output will be sine wave but with energy loss and hafl cycle loss, frequency will not double, if it has bridge at output it will double the frequency andand will be pulse sine, and if it has capacitor with, bridge it will double the frequency andof generate SOME sort of pulse, see on net for your flyback model)
3. Calculate the capacitor value by determining input frequency with step 2 using inductance of primary that youyou wound and resonant formula.
4. Use my schematics with flyback to power up transformer

At output you probaly will have HV at ETBC frequency. THIS WILL FEED ETBC WITH DIRECT RESONANCE.

When I try I will tell you.

[med.3012]

To achieve resonance in HV, we need to get frequency same as the frequency of the ETBC, in flyback transformer with rectifier diodes, frequency in input to primary will get doubled at the output. If we need frequency of 700Hz, we will input 350Hz to flyback primary(that we wounded on ferrite core), we will use Mazilli to supply flyback with 350Hz by calculating values of capacitor and wounded primary on flyback. On output we will get some sort of DC HV 700Hz pulse, and this is exactly what our ETBC need, direct resonance is achieved. Tesla has this problem because he has not better technology to regulate input frequency, he need to wound very different coils and make very different caps to achieve that. I will try to implement this when new parts for Mazilli come to me(old parts are burnt out), if you can please try this:

1. Calculate frequency of ETBC,
2. See my previous images about Mazilli and frequency output(if your flyback has no rectifier, output will be full sine wave and input frequency will not double, if it has one diode for rectify, output will be sine wave but with energy loss and hafl cycle loss, frequency will not double, if it has bridge at output it will double the frequency andand will be pulse sine, and if it has capacitor with, bridge it will double the frequency andof generate SOME sort of pulse, see on net for your flyback model)
3. Calculate the capacitor value by determining input frequency with step 2 using inductance of primary that youyou wound and resonant formula.
4. Use my schematics with flyback to power up transformer

At output you probaly will have HV at ETBC frequency. THIS WILL FEED ETBC WITH DIRECT RESONANCE.

When I try I will tell you.

if the flyback has diodes in serial ( common flyback has 1 diode ) the frequency will equal to the input frequency not the twice, i hope you will success in this , i am too i don't have a good hardware but for sure there's a clever way that i want to invent .

[Pidja105]

if the flyback has diodes in serial ( common flyback has 1 diode ) the frequency will equal to the input frequency not the twice, i hope you will success in this , i am too i don't have a good hardware but for sure there's a clever way that i want to invent .

If you know, have flyback capacitor?


Ps. I SAID THAT IF DIODES ARE IN BRIDGE FREQUENCY WILL DOUBLE.

[med.3012]

If you know, have flyback capacitor?


Ps. I SAID THAT IF DIODES ARE IN BRIDGE FREQUENCY WILL DOUBLE.

i am not sure but computer monitor may have, google for it !

[Pidja105]

Why we are using ETBC whem Don describes in videos and pictures regular thick wire coil?

[med.3012]

Why we are using ETBC whem Don describes in videos and pictures regular thick wire coil?

why you don't try something new to learn from ?

[Pidja105]

why you don't try something new to learn from ?

How I can learn that, ETBC is mentioned directly ONLY in your sources.

[med.3012]

How I can learn that, ETBC is mentioned directly ONLY in your sources.

the ETBC is an extension of tesla bifilar coil .. if it's not mentioned this is because it's important and maybe not understood !

[Pidja105]

In which frequency oscillates your ETBC and what is your biggest success with energy?

[med.3012]

In which frequency oscillates your ETBC and what is your biggest success with energy?

each ETBC has its natural resonance frequency .. energy isn't my aim but my aim is to understand this kind of open source power systems, unfortunately there no real help in this field.., my biggest success is only words ..

[Pidja105]

Can you post the newest schematics about resonance energy device?

[med.3012]

Can you post the newest schematics about resonance energy device?

this device is composed from simple parts, you need a source of voltage to excite the system example 12 v bat , after that you need a source for high voltage which excite the reactor coil, the reactant coil take the power and a diode bridge condense the power which present in huge amount , an inverter to invert it some power can be used as feed back ! that's all

[Pidja105]

I started to think that obtained power is not reactive, as reactive cannot preform work, how can sparks from your pdf breakdown air and produce light? That is work, maybe that cannot burn trough paper because of HF, and reactive electricity cannot be converted to active. If voltage and current are in 90 degrees shift, driving it trough diodes will not create straight line at output and will not combine V and A. I think it is because frequency.

[med.3012]

I started to think that obtained power is not reactive, as reactive cannot preform work, how can sparks from your pdf breakdown air and produce light? That is work, maybe that cannot burn trough paper because of HF, and reactive electricity cannot be converted to active. If voltage and current are in 90 degrees shift, driving it trough diodes will not create straight line at output and will not combine V and A. I think it is because frequency.

the ETBC combine negative and positive energy together , if you talk about P energy we have reactive power the same apply to N energy but together you have Voltage in phase with current , this mean you have active real power, this is the benefit when we combine inductance with capacitance together the only problem that isn't clear in my PDF is the fact we need to close the junction CD ...

the reason for this the fact there's two different current flow together in the same wire, the red and the blue in the drawing ,

in closed system we have V = R x I

in open system we have V = I

this equation describe a physical fact not a mathematical fact ..

[med.3012]