The Resonance Energy Device Explained

[Dwane]

Specific reference.

You should read Tesla article from 1900 or other documents where he described the empty box lying deep in the dormant lake....the useful and novel method of extracting and converting potential energy...

Hi boguslaw,
Thanks for the input. Without having to endure several weeks reading tombs of Tesla documents, would you have a specific reference for me to read?

Thanks

Dwane

[Dwane]

Replication

Hello med.3012,
This replication is on my todo list, next off the cab rank! Unfortunately life gets in the way of our leisurely pursuits. I have also read your Mohammed document, including part 2. My observation of the "Empty Box" noted by boguslaw, which I defined as being filled in suspension, I see as the challenge to develop.

I shall post my replication hopefully next week, I shall be better armed with information about the device having built one!!

edit: just out of curiosity, is there any preference for winding direction for the above circuit, that is, CW or CCW?

Thanks

Dwane.

[boguslaw]

Here https://teslauniverse.com/sites/defa...9000600-01.pdf

[Dwane]

Here https://teslauniverse.com/sites/defa...9000600-01.pdf

Many thanks for your trouble

Regards

Dwane

[med.3012]

Hello med.3012,
This replication is on my todo list, next off the cab rank! Unfortunately life gets in the way of our leisurely pursuits. I have also read your Mohammed document, including part 2. My observation of the "Empty Box" noted by boguslaw, which I defined as being filled in suspension, I see as the challenge to develop.

I shall post my replication hopefully next week, I shall be better armed with information about the device having built one!!

edit: just out of curiosity, is there any preference for winding direction for the above circuit, that is, CW or CCW?

Thanks

Dwane.

Hello Dwane,

i did that experiment just to see if i am correct or wrong so no deep improvement since i have a big obstacle using high voltage, the ferrite core is CCW ( around 160 turns not 80 T ! my mind stuck in the half because i made two coil 80 t each, most TV Yoke can be divided into two parts )


do your test and try to figure out what's going on, the resonance is important because you need the two part of the gathered neutrino particle , at the moment i am focusing in the use of ETBC in electrotherapy at least to benefit from this technology, i made a Tesla violet ray machine based on the ETBC as primary coil ( one copper foil and another aluminium foil )




i test it against headache and it's great for instant relief, it can be used for a lots of illness and disease , i know this is an energetic forum but the healing power is for our body energy , the key factor of using it in healing is the amount of power that can be drawn from the environment.. so it can be very strong against diseases ..

[Dwane]

Have started the build! Finished the Mazilli last night will start the tower coil today, will use .72 wire as that is what I have available.

I wonder if your UV lamp will stop tinnitus! Now that would give us sufferers a lot of peace. We will never know what silence is again!

Regards

Dwane

[Stealth]

It has been discovered that tinnitus is a deficieny in vitamin B3, B6,and B9. stealth

[Dwane]

It has been discovered that tinnitus is a deficieny in vitamin B3, B6,and B9. stealth

Thanks for the observation. Too easy! As there is about 10% of any population suffering from tinnitus, you could think that a concentrated effort would have been made for a solution. I think your suggestion is preventative medicine. Here is one of quite a few links to some of the vagaries of treatments for this frustrating affliction.
Top Five Remedies for Tinnitus – Dr. Emily Kane

To really confuse the issue, try a doctor google search. Unfortunately, there is no single diagnosis for tinnitus.

Thank you for your reply

Dwane

[Dwane]

ETBC Winds

Hello Med.3012,
I have read so much in the last day or so. I am now a bit confused. For winding the ETBC do I wind one coil and use CD for the sg, or do I wind two ETBC CW and CCW and close CD on each coil and use the two CD points for the SG or have the two CD points open and fire two sg's?

Thank you

Dwane

[med.3012]

Hello Med.3012,
I have read so much in the last day or so. I am now a bit confused. For winding the ETBC do I wind one coil and use CD for the sg, or do I wind two ETBC CW and CCW and close CD on each coil and use the two CD points for the SG or have the two CD points open and fire two sg's?

Thank you

Dwane

Hello Dwane,

the SG in CD don't produce the power, i learned this across the time , the old post show the progress , not all the info are correct, FIG 59 in my PDF show the correct usage , if you want to use Mazzilli driver please lower the diameter of ETBC , the reason is THE ETBC have to be close to the tower coil in order to light the bulb ( this obviously a capacitive induction )

http://www.energeticforum.com/attach...515_200840-jpg

[med.3012]

now this is the actual sizes used :

[med.3012]

The length of foils is 2 meter each with 20 cm width , the used metal is the aluminium in this test now if you have a problem soldering the Aluminium with copper wire please use a mineral oil , see this video for details

https://youtu.be/_mYkM9lHMho

[med.3012]

in this photo ;



you see the connections was made in just one side! this is to facilitate working since it's easy to make the junction CD, the ends of ETBC A AND B is located in just one side, this is also good.

in high voltage you can use only the half of ETBC to excite the whole coil ! what does this mean ? it mean you can excite it from AC and DB remain out of the excitation circuit but it will oscillate as expected using the primary current that charge the foils electrically !

[med.3012]

Have started the build! Finished the Mazilli last night will start the tower coil today, will use .72 wire as that is what I have available.

I wonder if your UV lamp will stop tinnitus! Now that would give us sufferers a lot of peace. We will never know what silence is again!

Regards

Dwane

the story about using the ETBC as therapeutic device was when i noticed an increase in my energy when i touch the high voltage tower coil ( the coil has 1000 turn with 0.15 mm wire very thin ) , one friend has a pain in his left hands asked me about the circuit he see, he don't know anything about high voltage , i turned the power on to show him the nice painless high voltage arcing even though it warm the point where the electricity contact your finger, he did the test and told me the pain is gone !! i don't know about his problem but i told him this electricity is beneficial for health at least what i have read from the internet about Tesla electrotherapy devices ; i also noticed sleep induction at night , it's clear this electricity work in harmony with our body, it's also beneficial in heat loss in the body especially these days in winter , the most amazing experiments is when used for headache ,with a closed eyes i put the bulb in the upper front of face and slide it right and left i felt if a hidden hand entered my head to give a massage to the brain !!! some will not believe this but this is what i felt .. the pain gone instantly .

electrotherapy is an entire science, most physician don't know the difference between transverse waves and scalar waves a cooperative work is needed, the following schematic was used as a Tesla violet ray device :





NB ; i don't encourage anyone to actually build the device i post this for education purpose not for therapeutic purpose!


teach yourself before !


http://www.arthurleej.com/Violet.pdf

[Dwane]

Hi med.3012,
I also spent some time watching your youtube videos. This is where I think the confusion set in. I have wound the tower. I have used the 0.8mm gauge wire on a 50mm poly pipe and 600 turns, the length of the winding is 489mm. I have wound the coil before I have seen the alteration to dimensions. It is raining again today, so I shall look at winding the ETBC and toroid. Although I think my toroid might be a bit smaller than yours. Will see how it goes.

Regards

Dwane