The Resonance Energy Device Explained

[med.3012]

the new post is now as attached PDF

[med.3012]

the same as attached photos , i don't know why i am not able to post text and photo at the same time !

[med.3012]

[med.3012]

just to share a book sent by a friend to me, parts of the book talk about Don Smith device, i hope it will be helpful !


http://szabadenergia.harmoniaban.org...tpu-dsmith.pdf

[John.K1]

H Med and guys. I see you have post lots of new info the time I wasn't here. I am back and ready to rock'n roll

[med.3012]

H Med and guys. I see you have post lots of new info the time I wasn't here. I am back and ready to rock'n roll

so happy to see your post ! but you quitted the thread when i was in need of your help anyway keep in touch with us so together we could do something !

[med.3012]

H Med and guys. I see you have post lots of new info the time I wasn't here. I am back and ready to rock'n roll

yesterday i just build my first double E-TBC based on the latest concept , the idea is to work with scalar waves, any ordinary coil lack the dimensions (2D) needed to collect the power, scalar waves work in 3D mode where the voltage is 2D and the current is 3D, the bad news is that i have internal arcing inside my double E-TBC , i have to repair the coil in order to make further test.

there is a third coil called the excitation coil , i built one around 300 turn, this coil for object to amplify radiant energy being produced from the active E-TBC.

the idea of this third coil is to work in discharge mechanism, any time there's a discharge in it you will have a great amplification, the reason for this behaviour is the hidden E-TBC where we have serial/parallel interaction both work together! any increase in radiant voltage will make a great increase in power ! similar to Tesla hairpin circuit where we have serial parallel work together , the third coil work as the heavy bar in Tesla hairpin circuit ...

more info will be provided when further test will be done .

[John.K1]

so happy to see your post ! but you quitted the thread when i was in need of your help anyway keep in touch with us so together we could do something !

I was getting merried Work on my 3D printer, casting some magnetite cores, building A. Komarov "Tesla " based device ... just lots of work you name it

I am back and searching for a document I put somewhere with very interesting info about the space between two tesla coils -Transmiter - receiver - so far I remember the distance between them should be very small - in other words "the distance" of the "like standing wave" Almost linear feed which match the standing or scalar waves of Schuman resonance or what ever resonance pending between the Ionosphere and the ground And I remember D. Smith was saying he taps the energy from some of these frequencies.

[John.K1]

Med

I didn't read all texts yet here, but I am sure you are aware of the device , which I also tried to build, the E-stress power generator.

Just wonder how much this device is common to the ETBC?

[med.3012]

I was getting merried Work on my 3D printer, casting some magnetite cores, building A. Komarov "Tesla " based device ... just lots of work you name it

I am back and searching for a document I put somewhere with very interesting info about the space between two tesla coils -Transmiter - receiver - so far I remember the distance between them should be very small - in other words "the distance" of the "like standing wave" Almost linear feed which match the standing or scalar waves of Schuman resonance or what ever resonance pending between the Ionosphere and the ground And I remember D. Smith was saying he taps the energy from some of these frequencies.

First of all congratulation and happy marriages, best wish for you both! i didn't heard about E-stress power generator, i am just watching some photo finding from goggle image search, the idea seem to be interesting even i have to take a deep look at it .


using two E-TBC work in the same resonance frequency seem to be an interesting idea, when the active ETBC work in parallel mode, the hidden ETBC work in both mode serial plus parallel ... the excitation coil work with the serial mode of the hidden ETBC which increase the overall power using a discharge mechanism ... now the ETBC will be able to produce a huge amount Ozone gas! ( caution here ) this phenomena indicate the high level of excitement.

the Hidden E-TBC is similar to the mixed E-TBC approach, if one produce voltage the other coil will produce current, but the hidden E-TBC will produce both at the same time ! but the geometry will be 3D scalar waves, 2D planes are the radiant voltage serial interaction with the excitation coil ( a kind of amplification ) , the axis where 2D plans fly describe the third dimension which is the whole radiant energy stream ( include radiant current ) , so radiant voltage flow vertical to radiant current , when R-voltage increase by discharge mechanism the hidden ETBC will supply more flying plans ... more power ... using serial /parallel interaction because this coil don't have a real SG, it's a pure energetic element, now both plates of the ETBC will produce a kind of longitudinal standing waves with max and min in each plates, here if another passive ETBC wound similar to the active coil it will interact directly with these standing waves but it's able to provide parallel mode for max radiant current and serial mode for max radiant voltage, the reactive electromagnetic waves are difficult to store, but in scalar radiant environment the third dimension will provide both ... this is the idea !

about your question i can't reply it , i have to understand E-Stress Power Generator at first.

[med.3012]

Thoughts about E-stress generator :

this is just a thoughts about this special oscillator/generator based on the following pdf ( the author is unknown )

@ John


www.energeticforum.com/attachment.php?attachmentid=15974&stc=1&d=14360513 70


the idea consist of eliminating Lenz's law using two coil connected to an oscillator ( here a the device need tuning), each coil let the current to move in two opposing direction, so no magnetic field inside these coils, in other hand they make together a kind of capacitor, the trick here is that : only from capacitive perspective the coil is formed! meaning that, even if Lenz's law don't apply to a single coil there is a charge displacement dynamic let the coils build a high level current... here the coils are open circuit and Lenz's law still don't apply! the idea is to generate magnetic field with no power, when the magnetic field collapse it's the time to oscillate with Cr ( this capacitor has 3 turn to form a kind of inductance )



this device is complicated, but as i see there is some similarity between the ETBC and the E-stress generator, both eliminate Lenz's law and both use the coils as capacitor.

[med.3012]

internal arcing between active ETBC and passive ETBC , the enemy of ETBC !

[med.3012]

some photos show how to construct a double ETBC with two coil , one active in black and the other passive in red . the layer are situated one by one, 4 layer of good insulator are needed.

it's better to form 4 contact in the passive ETBC for further test.

[John.K1]

Hi Med

What voltage do you feed it with? How is it with the relation between Capacitance Vs Inductance - Is that what determines its natural resonant frequency? The frequency we should feed it with?

[med.3012]

Hi Med

What voltage do you feed it with? How is it with the relation between Capacitance Vs Inductance - Is that what determines its natural resonant frequency? The frequency we should feed it with?

Hi John


use any voltage suitable for the ETBC you use... maybe around 5kv will be a good choice, the SG1 will determine this value, it's good to make an ETBC with high inductance but low capacitance, this give a good oscillation condition due to the high electromagnetic feedback inside the active ETBC, the low capacitance insure this condition.

I'm attaching a simple drawing show the passive ETBC with a variable resistance for tuning purpose, the reason for this is to achieve a manageable voltage across your output, in other hand it's the complexity of radiant electricity, without this resistance there's no active power in the output !! radiant voltage is always absent in the wire until there's a resistance that make a kind of parallel interaction with radiant current so the output will see both voltage plus current only when there's a kind of serial/parallel interaction ...

i still didn't tested this technique but i think this is how it work .