The Resonance Energy Device Explained

[med.3012]

Hi to all,

in this post i am going to add an important video talk about electron spin and magnetism, it's a short video ( about 6min) but very simplified:

https://www.youtube.com/watch?v=Bl-zUmeYj74

https://www.youtube.com/watch?v=Bl-zUmeYj74

in the above video we will meet a very interesting characteristic about electron and its related twisted space, this is a crucial phenomena regarding extracting the power from the E-TBC, simply we need to reverse the operation in order to have useful electrical energy, please watch the video

[John.K1]

Hi med.
Nice video.
This is why we use opposite coils to separate charges. Mobius strip is interesting phenomena. Time ago i wnted to make a coil of this shape and to observe some effects.

[med.3012]

HI John,

welcome back! Yes it's one of the best video i like to watch, i need to arrange my ideas to start experimenting again..... , one of the best phenomena that worth to be tested can be found in the mixed E-TBC, one of the strange phenomena when this device was oscillating is the ampere meter reading a high amperage ( more then 4A ) in just one side of the mixed E-TBC but the amperage drop in the other side, all this without direct connection !!

everything is related to each other, the problem in the mixed E-TBC is you have to load it in equal, this mean the phase shift can be 45° rather than 90°! or even 0° which mean you will be back to the reactive energy problem if you load the mixed E-TBC without equilibrium, we are dealing with invisible particle that can we found in twisted space, so careful studies is good even some friends don't like the theory but i like it because i don't have the needed time and the resource to do a lots of experiments.

i hope if we could make something as soon as possible

[John.K1]

Hi Med. As you said, everything is related to each other. More I am diging through the theories and laws more I can see how close we are to have free energy and only tuning process is what we do not right.

I realised that when I saw how distance between two coils change not only resonant frequency, but also the phase shift between them. In other word- distance matter!

[med.3012]

HI John! you are right the distance matter! in Tesla wireless system the distance was related to waves length, Tesla did some mistake to learn when he tried to record the event of lightning without success, the reason is the wrong tuning after that he applied these info in his wireless system to transmit the power to large distance, this is possible with the right tuning.

free energy will be a must with global warming problems and dangers, in some country the temperature goes to 72° degrees, in Algeria we got 56° in some town (200 KM from the sea ) , the electrical grid will no longer support the huge demand in the nearest future, a cost effective device is needed !

[med.3012]

HI John, hello everyone, a special greeting to the followers of this thread , after the post of john and after his proposal about tuning, i will propose a new schematic that can be tested with the E-TBC , this thread has a lots of good info that have to be managed correctly, this is why i ask the help of member here for test or ideas, we can't depend on Don Smith resources only! if we do so we will not move further more, the only device shown to the public in operation was a long time ago in black box ...


i remember a test a did before about the E-TBC when CD connection was closed, the test was done with high voltage source, the test show the ability of this device to keep the power for long time when CD is closed, the strange is that this device was totally isolated from any source of power... it's like a coil keeping electrostatic charges!

this test prove the power of E-TBC when CD connection is closed, if good tuning is achieved it can start with a few watts to produce a huge electromagnetic flux, the E-TBC is composed from three different elements all in parallel, they are R, L and C:



the idea above is to make the magnetic energy higher than the electric energy for great efficiently because it's the magnetic field which make the feedback inside this device, finally the proposed circuit will be as follow :



the idea is known and practically easy to build, it consist of using two capacitor in serial to feed the E-TBC, this will ensure a great voltage between coil side AB since the voltage between the main SG will equal the voltage fed into the E-TBC, now if we are able to tune the high voltage power source oscillation so a max voltage is always available, the results will be further great.

[med.3012]

adding some comments:

what make the above circuit better than using the connection CD as spark gap is all related to the connection between the three elements make the E-TBC a valuable device they are R,L,C, using CD as spark gap will give a good but very short resonance since the third elements is missing which is the parameter R, this player will tell us how good the feedback inside this device is working ? without R the oscillation will die out very soon and this is shown in the previous oscillation graph, the above circuit will ensure a permanent oscillation !

[John.K1]

Hi Med.
Regarding to your RCL cuircuit, becouse the natural loses, it will end up with dumped oscilation. Now I will citate something what makes me think: " If you apply opposite magnetic field OR opposite current AT right time, the frequency will be self sustaining (not dumped) "
Now why it makes me to think? Becouse two days ago I was watching YouTube video where some guy was sh
owing how the two opposite coils kept stable waveform after disconection of the source.

[med.3012]

Hi Med.
Regarding to your RCL cuircuit, becouse the natural loses, it will end up with dumped oscilation. Now I will citate something what makes me think: " If you apply opposite magnetic field OR opposite current AT right time, the frequency will be self sustaining (not dumped) "
Now why it makes me to think? Becouse two days ago I was watching YouTube video where some guy was sh
owing how the two opposite coils kept stable waveform after disconection of the source.

Hi John, just a quick reply because it's late here( i need to sleep )
the technique you talk about can be done in low voltage using some synchronization, but it worth to be seen if you can give us the video link, our device have to be fed all the time , we can't isolate it , in other hand even the increased oscillation have to shut down and start oscillating and increasing or the device will be destroyed .... here we have energy amplification, the magnetic field inside the E-TBC isn't homogeneous, so it's not a coil nor a capacitor but both at the same time, you still have a special electromagnetic feedback inside the E-TBC, if the the magnetic portion is good you will have automatically a good electric portion and the amplification is there... one of the most big problem i faced with the ETBC is the time needed to charge the capacitor bank in order to use them for loads, anyway i have to prove my point of view with practical test for better reliability.

[John.K1]

Hi Med.

I know it is coil and the capacitor together.

I will try to find that movie link about un-dumped oscillation.

There is a Russian guy called Mischin. The coil - capacitor is his speciality. He has made a device based on this principle . It looks like a toroid and it take almost nothing and he can lit the LED. I am at work by now. When I will come home I will post you some links or make some sketches for you. His videos are very long (each is nearly an hour long) It is quite hard for me to follow as I am not native Russian speaking . I am Czech. Living in Ireland

70°??? That's mental. I already do not know how the sun looks like Many rainy days here this summer with temperature around 19°

[med.3012]

Hi John,

everything is related to each other you remember, in the south we have a big desert, in some places the temperature exceed 55° with easy, in the past they use a special building to protect themselves from this severe climate, now they use air conditioner, our national TV Weather forecast will never say the real temperature !! if they do it will be a Disaster area... i think this is happening to the whole world and they never mention the real dangers we are facing!

anyway it's always good to see OU devices, i don't understand Russian also, but i watch other video even if i don't understand what they talk, sometimes i pick up the idea across the schematic, sometimes i got an inspiration, powerful devices can depend on modest ideas!

[med.3012]

Hello everyone, just a small idea to share:





EDIT: this is just an idea likely the two capacitor was for impedance matching this mean they used in parallel not in serial as the circuit proposed.

[med.3012]

Hi John!


hope you are doing fine, where is the video link ? OK hope you have something new ?

[John.K1]

Hi Med. i can't find it! I have checked all history and it is not there. I am more than week without mine main computer. Should get a new processor today or tommorow. Once will be my computer alive again I will check if is it between my downloads. I have made my video dedicated to Komarov's device. now a bit messing with that here A. Komarov - YouTube


Edit: On your picture, I think they are not just a regular caps. If I good remember , they are "custom" made and they tune them-self?

[med.3012]

Hi Med. i can't find it! I have checked all history and it is not there. I am more than week without mine main computer. Should get a new processor today or tommorow. Once will be my computer alive again I will check if is it between my downloads. I have made my video dedicated to Komarov's device. now a bit messing with that here A. Komarov - YouTube


Edit: On your picture, I think they are not just a regular caps. If I good remember , they are "custom" made and they tune them-self?

HI John, nice video, no problem at all, i thought you had that video at hand, i saw a guy in you tube talk about that capacitor which is impossible to find but they can be found! you could see them on that video, it's clear DS was talking about very special capacitor that must be built locally for example the E-TBC!!!, i think i got the key about using the standing wave in his device, day by day the pieces of puzzle is collected, i just need some experiments, there's really no need to use very high frequency to achieve a manageable standing wave length this is really strange but the length of the waves generated using the E-TBC is directly related to the length of 1/2 foil form it ...

electrostatic induction mechanism is the key for this special phenomena, this is why it's important to manage the length of L2 according the length of 1/2 foil, for example if 1/2 foil = 1M it's better to have L2 as 4 meter, the E-TBC has a form of special standing waves this is visible when we talk about the induced electric field for example 0---v the first foil v----2V the second foil when superposition the magnetic field take the same symmetry, this is another advantage to use the capacitor as coil, as a parametric oscillator a lots of players take place to change the normal rules , we already know the frequency is twice compared normal oscillating LC tank, experiments will tell more !