The Resonance Energy Device Explained

[med.3012]

Using the ancient 16F84 and XR2206, can build yourself this:https://www.youtube.com/watch?v=6ZUecmRnAYA
the source code on the link above

thanks for contributing to this thread

[med.3012]

Hello John, hello everyone.


are there any advancement, news ?

[John.K1]

Hi Med,

Had quite busy week as have been involved in car accident, when my car has been hit and badly damaged from behind.

Can you please tell me, from which point of ETBC you actually collect excess energy? Also thinking about the resonance - if this is the coil -capacitor in series the resonant frequency is actually one where the amplitude on my scope is the smallest- right? like in standard serial LC resonance?

[med.3012]

Hi Med,

Had quite busy week as have been involved in car accident, when my car has been hit and badly damaged from behind.

Can you please tell me, from which point of ETBC you actually collect excess energy? Also thinking about the resonance - if this is the coil -capacitor in series the resonant frequency is actually one where the amplitude on my scope is the smallest- right? like in standard serial LC resonance?

Hi John,

First of all sorry for your cars accident, the most important is you are alive for further experiments !
my work is based on reverse engineering Donald Smith device, by changing L1 in Smith device by the E-TBC this give the right combination or the missed Key of his device.
about your question from which point of ETBC you actually collect excess energy? in fact there's no point, the E-TBC is the primary coil of an energetic multidimensional transformer, you need another L2 coil to collect the excess energy.

when the amplitude on your scope is the smallest it's the time for serial resonance to play, the electric current will be max but the voltage will be radiant, as i said it's the time for Ozone gas to be produced, this is another fact which make this device valuable to our environment, in all my test when CD connection in the E-TBC WAS OPEN i got only pure voltage without any real current ...! even if the capacitor was charged for a long time, if CD is open we just cut the path for the electric current to enter our device ... in L2 side you must emulate the E-TBC behavior by using two pick coil connected together , the same as DS did, one CCW and the other will be CW, the E-TBC is able to be both coils at the same time as discussed, the center TAP is very important, think about it the same as the junction CD, X point will transform reactive power to useful energy since it's the balance point, current equal the voltage but when CD is short circuited we got active energy ! any further question are welcome


Edit : balance point = the third missed parameter it's the resistance R , here it's a super conductive resistance or negative resistance .

[med.3012]

a lots of silence is here !

[med.3012]

A few points on the road !

this post is for my friend that are following me, especially to John in this forum, according your latest request to me i know i made some confusing statement here especially the way to harvest the power from the E-TBC, working on both sides practically and theoretically isn't easy, this is why it seem i am throwing ideas right and left hand but who know maybe someone will see what we are not able to see !

i proposed a lots of way to handle the E-TBC but finally we have only one way, from my experience in this device i can affirm that latest proposed arrangement do work! the most important is to achieve the resonance without depending on the junction CD, this is the only explanation why DS used his yellow capacitor for impedance matching :



what the E-TBC can do ?

1- this device work in inverse to lenz's law, what is this law for ? Lenz's law is a common way of understanding how electromagnetic circuits obey Newton's third law and the conservation of energy in this device the capacitor portion is able to guard the magnetic energy statically by conserving the induced electric field, from A to B it's an open coil has a built in capacitor ... in other words lenz's law can't be applied because there's no close circuit ...

2- because the capacitor is a form from the coil itself this imply some physical difficulties, how this device can oscillate ?! the coil and capacitor must change their position in X location, this is necessary so the device is able to oscillate, this mean there's a kind of serial resonance take place before the device pass to the other half oscillation, A will take the position of B this look like if this device is changing its shape but in reality this is not, it's all about electrons spin mechanism, because the CCW coil will appear as CW from behind the electrons don't move at all but they are related to each other by spin mechanism ..


3- the spark gap as we know it don't exist in this device, because we already have a quantum spark gap, maybe i am dreaming but the spark gap in most case is a lost of power ( i am clear in most case !! ), ordinary spar gap is very difficult to maintain in perfect condition, in other hand it's extremely difficult to achieve a perfect resonance with the no linearity of SG, when the magnetic field take a max value, the stored static charge take a max value also since they depend on the strength of magnetic field, this mean there is two kind of electron can exist together at the same time ! now please remember the doublet electrons that DS talk about in his document please take a look here www.free-energy-info.com/Smith.pdf !!! this is strange, from where this idea came to his mind ? two charge with the same polarity can exist together...


i will try to post more but GOOD NIGHT

[John.K1]

Hi Med,

Regarding to your statement about the SparkGap - I am not very confident about it. You are right it is hard to maintain the frequency, on other hand you do not know exactly what is happening when the spark strike. Could cause some inflow of the energy in to the system? Just messing with imagination Tesla was using magnets with his SG to avoid two way sparking. if spark gap, I would definitely use the magnets too. And the best think would be to use it in consistent environment - like in gas tube. I am using gas SG myself as Donald does. Actually you can see it on your picture next to the capacitors.

[med.3012]

Hi John,


the SG is the cause of radiation, the most known Tesla free energy technology is the wireless electric transmitter, so it's obviously why he used the SG, Tesla himself faced a lots of problems with spark gap, this is why he used hot air for quenching, strong magnet .. etc

in Don smith system we have to be careful, in the above photo you see two black wire come from the oscillator but the same SG is connected to the ground, this is a third connection, in Donald L. Smith 1996 Tesla Symposium he stated it clearly the spark gap isn't something you know ...so he use the SG as a kind of voltage limitation with the ground.

the quantum spark gap do radiate the power, but it will maintain the electric current also by providing the needed path for it at the same time quenching mechanism is there by electron changing spin mechanism !

[med.3012]

why we need the spark gap if X point can provide a quantum spark gap equivalent ?

i found a good schematic explain how the real SG is located, i think most of us had seen it :



by simple comparison between the above circuit and Tesla wireless transmitter we find the earth connection is needed in the secondary part :



the reason for earth connection in Tesla wireless system is for taking useful electrons since radiant voltage flow in vertical manner compared radiant current ( here we have to use the term radiant current so we could understand this complex phenomena by dividing its parts ...)
the following image show a previous posted drawing about this :



the transmitter with the receiver form a big capacitor :



standing waves are a critical part from Tesla wireless system, but in the E-TBC they will be formed automatically because we use a built in capacitor... electrostatic induction is the reason that make any capacitor able to conduct the AC current without direct contact so there's standing waves wherever there's a capacitor, the electromagnetic model describe the capacitor isn't valid.

the spark gap as we know it isn't needed as on/off mechanism since the E-TBC is able to do this because we already has a special built in capacitor able to oscillate with it's built in coil ! everything in this device is the same thing! the capacitor it's a coil, the coil is made by conducting foils so it's a capacitor! when the device oscillate both side can exchange the location because it's easy to do that, because the oscillation will be increased it's a must to put a kind of voltage limitation or we will lose either the E-TBC or the capacitor work in parallel with it .

[med.3012]

i think it's better to talk about the technology used in the E-TBC from another angle, so the idea will be clear, i hope to achieve a better interactive discussion here ... one hand will never clap ! when a team achieve the success this technology will spread out, there's no mean for personnel success here ...

[John.K1]

Hi Med,

Lets talk what condition has to be satisfy to build the unit. From my point of view it will require more turns than has my previous build I have only 6 -7 turns on 40mm tube which means empty internal space. Also the strength of magnetic field depends on the number of turns, right? What else?

[med.3012]

Hi Med,

Lets talk what condition has to be satisfy to build the unit. From my point of view it will require more turns than has my previous build I have only 6 -7 turns on 40mm tube which means empty internal space. Also the strength of magnetic field depends on the number of turns, right? What else?

Hi John,

i was preparing a new post before your question but let's talk about your request at this moment, the only very important condition is the resonance when the junction CD in your E-TBC is closed then you are in business, the secondary coil isn't a problem but you have to choose a proportional length, so the problem now is the resonance in high voltage if you did it please tell us.

in the previous posts i said about the needed condition to achieve power amplification, here you are again :



the more turns the better according my conclusion so you are right more magnetic field strength is better, this condition must be present all the time without depending on the open CD to achieve the resonance, if CD is open we have serious problem here, the first is the low oscillation speed depending on the speed of spark gap, the second problem is the lost connection for the electric current path so we have only pure voltage without real useful electric current, a good ground is needed but i assume you could see much power if you just achieve the resonance as i said.


it's too late now ! Good night !

[med.3012]

just completing the idea about the role of spark gap in the E-TBC, this don't mean the SG can't produce a surplus in energy, most over energy researchers may noticed the difficulty in achieving OE results depending on spark gap only, so I am clear now, without knowing how to deal with the radiated energy from the SG it's extremely difficult to achieve a significant results.

the following drawing is a previously proposed circuit; the objective is to emulate Tesla wireless transmitter system locally by treating the emitted radiant energy sent by the E-TBC when the resonance is achieved depending on the open CD junction please take a look at this :



the test I did gave nothing important as if there's something missed there, I ask myself why radiant energy isn't able to give back a useful hot electricity from the oscillating E-TBC, if the SG is able to give a surplus in power why it's difficult to convert it back to normal hot electricity of course it must be amplified to achieve OE device, as Mr. Tesla noticed we have to work with one way direct current to achieve radiant effect, the resulted power in normal Tesla coil is a pure voltage as Donald smith stated, at the same time it's known the presence of enormous electromagnetic flux in the end of any operating Tesla coil but still there's a problem in converting this huge flux back to normal useful energy!


in the above published Tesla patent about his wireless power transmitter system you notice the direction how Tesla wound his L2 coil in the transmitter system and in the receiver system (primary), the transmitter is CW while the receiver is CCW, this is what we call it energy balance , energy balance is needed to convert back radiant energy to useful electric power that can do real work, the big flat coils used in Tesla system are vital to deal with the induced rotating electric field, Floyd sweet described the importance of this field in free energy device when he said : However, the induced motional E-field changes the system upon which those laws need to be applied .

in a few words energy balance have to be maintained, so radiant energy can be converted back very easily, at the same time the induced motional E-field is a part from this phenomena, all this can happen effectively if the junction CD is closed, i think that the induced rotating electric field is the cause for letting the capacitor conduct an alternating current, this field spread itself the same as scalar waves do, so it has a static potion and another dynamic portion, because this field is the big player in the E-TBC standing waves will be formed automatically according L1 length, another important information i have to give is the way how this field charge the capacitor? this field treat the capacitor as a coil ! because it exist in the empty space there's no need to direct contact to charge the capacitor it will charge it like Z character !

[John.K1]

Hi Med.

My ETBC pulses (or its harmonic) around 2MHz, That's easy to achieve by normal Tesla coil and signal generator, right. My question is how can I measure the extra energy? In fact not sure in which point to tap the energy and not destroy the internal oscillation

[med.3012]

Hi Med.

My ETBC pulses (or its harmonic) around 2MHz, That's easy to achieve by normal Tesla coil and signal generator, right. My question is how can I measure the extra energy? In fact not sure in which point to tap the energy and not destroy the internal oscillation

Hi John,

this is a very good question indeed ! let's start step by step, can you achieve the resonance of your E-TBC without any load? i mean let's do it without L2 coil just to see if we are able to do that, you said it's easy to do, this is very nice, now keep in mind how the E-TBC oscillate naturally, from the coil side i mean from AB points high voltage must be applied and kept in high value! this involve the presence of perfect resonance, in practice when you load the E-TBC the frequency of your high voltage source ( Tesla coil ) will be affected, sometimes moving your hand around it may affect the resonance!! 2MHZ is relatively high to maintain the frequency stable in practice, the problem in your setup is you are working directly with the E-TBC, so any change will cause a large frequency drift, but if you treat the E-TBC as coil only you can lower the frequency you work with into 30 KHZ value for example, you can do that by using another high voltage capacitor working in parallel with the E-TBC, after this capacitor you have to use a HV diode to block the negative oscillation the same as Donald smith did, the important is to understand why this is necessary, the oscillation of E-TBC alone is higher than the E-TBC + the parallel capacitor in resonance you are sure your ETBC can take a high voltage DC current and then it will oscillate alone with the benefit of the closed CD junction, if you achieve this the next steps will be easy since the energy is present!

now L2 coil have to be inside the E-TBC not outside, remember the previous posts about Lenz's law, the open circuit have to be open.. this mean the points AB have to be outside your system! if L2 is outside Lenz's law will be applied and this is not good as it will affect the resonance also, if L2 is inside the E-TBC the system will not be affected too much because we still have an open circuit, if we manage the distance between the E-TBC and L2 to have a lesser mutual induction for free oscillation this will be good also.

in reality there's another option to make the E-TBC oscillate without great problem, i have a technical problem with my system C1/C2 so i will jump to this option,but i need some calculation, for your benefit and other readers, we can feed the E-TBC with the induced rotating electric field! i will let you think about that maybe you could see the solution