The Resonance Energy Device Explained

[med.3012]

update
******

it appear the ground work good when the system work in optimal condition, this mean the more the system produce power the more the ground work better .. this is why in some level the ground seem to be useless, finally the resonance will be the goal for this device to work better.

[med.3012]

Hello everyone ,


Just to add some technical info about the ETBC so the idea will be clear and easy to understand , the story of this device is to convert reactive power to active power or unreal to real

if you take a look at ordinary L/C circuit where you have a capacitor in parallel with an inductor you have a phase shift between current and voltage, this is known as unreal power or reactive power ..







The ETBC take advantage of the two together , please take a look here :





the ETBC is able to convert reactive power to active power because the inductor form the capacitor and vise versa but we have to notice the point where this happen, this phenomena appear exactly where the capacitance cancel the inductance in other words in X location where CD is closed, this imply the need of high current to activate the ETBC power but don't worry ! the ETBC can work effectively with reactive current which mean high voltage resonating system lead to high reactive current is still wattless... the ETBC see this current and convert it to active power without problems, you can see this when you choose a high capacitance discharging in the ETBC, this is why we need the resonance ...

[cap10nf]

Hello Med;

I am a silent reader and I apreciate your effort.
Thank you very much for sharing your research.

Kindly Regards

Kent

[med.3012]

Hello Med;

I am a silent reader and I apreciate your effort.
Thank you very much for sharing your research.

Kindly Regards

Kent

Hello Kent !

Thanks so much for your encouragement, the Insistence is needed in this filed but unfortunately very few have the patience needed, i worked with some friend for a couple of months and now when i am able to see some significant power no one is around me ( except one ) to share the same design and discuss the problems, this is needed because in some place in the world it's easy to find almost everything you need so the progress can be fast... i thank everyone gave a help even morally but sometimes i ask myself if what i am doing is really needed ?

the idea is clear ...we just need a little push to make it for real, more contributor is what we need at the moment, the primary device must have a little power production, for example 600W an inverter will be a good idea to start with ... more ideas is ready now i am looking for more people

[med.3012]

Hi med!
Did you put some magnetic core (iron lamination or ferrite)??
Thank you for sharing your great reasearch! It is apreaciate.
:0)

this another reply about the same question, as you know this device is still under development , i wasn't sure about my past answer but now things start to appear

ferromagnetic material is needed in this device because we have a special built in capacitor that must be recharged in zero time ( twice the normal frequency ), ferromagnetic material will catch that magnetic domain and emulate the capacitor charging behavior... as you know this is a magnetic resonating system so
the main player is the magnetic field not the electric field, if we manipulate this field correctly the result will be unbelievable

[John.K1]

self charged capacitor ?!


is it possible to make a self charged capacitor under some conditions? i saw this in some test, the capacitor (4700UF/50V) was self charged to 20V, shorting the leg isn't enough to discharge it !!! i repeated the discharge operation but no way ! after that i connected two LED and they was lighted, in some condition the discharge of radiant energy create something very special in the capacitor make it self power !

any thoughts ?

Hi Med, I think this is very normal behavior of large capacitors. I come across this quite often. Sometime I am discharging cap for couple minutes. I guess more can be found on google The capacitance plays here big role. Any way, how are you?

Regards,
Jan

[John.K1]

this another reply about the same question, as you know this device is still under development , i wasn't sure about my past answer but now things start to appear

ferromagnetic material is needed in this device because we have a special built in capacitor that must be recharged in zero time ( twice the normal frequency ), ferromagnetic material will catch that magnetic domain and emulate the capacitor charging behavior... as you know this is a magnetic resonating system so
the main player is the magnetic field not the electric field, if we manipulate this field correctly the result will be unbelievable

Just some thought, about the ferromagnetic domains. I guess that ferromagnetic material should be as thin as possible to change the domains quickly. Thicker the material more time delays resulting in incoherence?? I would try just to spray the thin layer of black sand?

[John.K1]

Some more my thought and Spaming I pretty much agree with Romanov who says the OU device should be tuned to the environment where you are located. If this fail you, will get interference resulting in not working device. And this is double true if the earth is implemented in the system. I have made the the scanner of my environment. It does open the transistor in natural environmental frequency. It might be worth to try it out with your device to??
regards,
Jan

[med.3012]

Some more my thought and Spaming I pretty much agree with Romanov who says the OU device should be tuned to the environment where you are located. If this fail you, will get interference resulting in not working device. And this is double true if the earth is implemented in the system. I have made the the scanner of my environment. It does open the transistor in natural environmental frequency. It might be worth to try it out with your device to??
regards,
Jan

Hello John !

All is Ok, thanks for asking, the electrolyte capacitor behavior is just interesting for me because it's the first time i see this, in other hand when recharging the same capa the phenomena gone ... for sure there's a special environment made inside the capacitor by the radiant energy that came from L2 , just sharing the experiment

thanks for your information about the ferrite ring because i am planning to build a large one, the optimal geometry will help a lots.

about tuning.... the ETBC show a solid behavior, as you know we failed when focusing in voltage only without understanding the whole picture, now it's the turn of reactive current which is the other side of high voltage in a resonating L/C tank circuit ...simply the high reactive current is the image of high voltage so you can secure a high voltage in the ETBC ( CD CLOSED... now we are dealing with a coil ) if the resonance is achieved, the resonance is the best option and i predict a huge amount of power...

in the ETBC we don't have an electric current as we know it, only electrons spin but we still have a built in capacitor that must be charged in zero time... this imply the use of magnetic wire or a ferromagnetic material to catch these magnetic domain and emulate the unreal current that charge this special capacitor ...

at the moment i am able to charge a 100UF to 300V in 5s and discharging it using a 40W /220V light bulb .. the input is 3w, this device show an increased output power if treated internally correctly... in other words it create it's own environment.

welcome man

[med.3012]

Some more my thought and Spaming I pretty much agree with Romanov who says the OU device should be tuned to the environment where you are located. If this fail you, will get interference resulting in not working device. And this is double true if the earth is implemented in the system. I have made the the scanner of my environment. It does open the transistor in natural environmental frequency. It might be worth to try it out with your device to??
regards,
Jan

can you please explain more about this idea ?

[med.3012]

update

just to update this thread from Don smith review thread :




some practical aspects :

the following photo show two separated aluminum foils, aluminum is available and relatively cheap, the ribbon used here are off the shelf:



the second image show the used tools :



to be continued ...

at this moment i am using a connectors to connect the conducting wires with foils, it's the best way since they are available and secure a stable connection ...



the first step is to make a small hole in the foils :



connect one side of this connector, prepare your wire for this contact as follow :



to be continued ...

now it's the time to put the cap of this connector as follow:



it's the time to make some effort !




to be continued ...

[med.3012]

the following image show the connector from bottom.




finally two prepared foils




you need 4 of these connectors so each side has two contact, the final product will be like that after adding an insulator



to be continued ...

another view of the final wire,



now this is the used TV YOKE, the ferrite have to be insulated since it's conductive



this is the first turn,




to be continued ....

this image show other turns :





and voila !




any furthers questions are welcome about how to construct this device, the following image show a 100W light bulb at full bright using only one toroidal and 6 turns in L2, caution is needed, the system is really dangerous, especially in the capacitor banks.

[med.3012]

Hello everyone ,


just to post an interesting Blog by Lawrence Rosier about Don Smith device, some interesting info are there !


PERPETUAL ELECTRIC

[med.3012]

just to share a short video show 100UF capacitor charging to 300V in about 4 second and discharging the power into 200V/40 W light bulb, the input power is 3 W, what do you think ?


[VIDEO]https://youtu.be/lo0dRiKWUOc[/VIDEO]


if you can't see the video here you are the link :

https://youtu.be/lo0dRiKWUOc

[med.3012]

Hello everyone ,


a new video published for the follower of ETBC design show a good improvement and can be found in the following link :

[VIDEO]https://youtu.be/a0FNZZywgng[/VIDEO]


or https://youtu.be/a0FNZZywgng

Just ignore the security warning that appear in some explorer like firefox or chromium !


Regards