Gerard Morin's Video - The Doubt about OverUnity is Over

[Tishatang]

Hi lorinrandone,

Well, thanks to you, one thing leads to another. That's what is great about this forum. Everyone gets a chance to contribute something.

I see I misspelled your name. Sorry about that. I blame it on my old eyes.

regards,
chris

[Tishatang]

Gerard Morin said to be taken ill in this discussion re energy

Roundtable discussion on alternative energy. Guy with long hair on left and another off screen both seen live demo with Gerard. One said Gerard teck needs spark gap to work. At about 45 min mark, mention was made Gerard got very sick and lady friend had bad stroke. Health effect from energy released or suppression, hmmm??

One People Round Table Jan 13 – 2015 | the one network

Talked also about Keshe tech and Dollard. Guy off screen seems very knowledgeable. Sound sucks, skype crap. Evidently Keshe tech real with validations? you decide.

[Electronic]

I have a hunch a rewind shop probably tried to make the coil on the right--I don't think it's factory that way.

Yes it is factory, employment of an aluminum ribbon coil as opposed to copper. Perhaps for the 220 voltage. I have picked up a couple of these generators, one is the 4 hp 1500 watt model and the other is a 2000 watt 5 hp model. McCulloch used a 3hp on the 1200 watt model and a 6 hp on the 3300 watt model.

The motor on the 1500 watt unit is junk but the generator portion is intact and can be driven with an electric motor. Both coils in the 1500 watt unit are aluminum ribbon and the output receptacles are twist lock design so it may have been strictly a 220 volt model.

The 2000 watt unit is in perfect condition, has two copper coils and is dual voltage 110 with a 15 amp fuse and 220 with a 20 amp fuse. Original 'slow burn' fuses intact with an extra set unopened in a McCulloch package.

I also have some original brochures/manuals. The flywheels/magnets are barium ferrite, there are two only, one on each side of the coils in attractive mode to each other. The polarity is likened unto a pie cut in half. One half of the pie is north, the other side is south. Which is to be expected for 60 cycle at 3600 rpm. A two pole generator, a very simple design....no doubt in my mind that it outputs a perfect sine wave. The McCulloch generator will operate my 12 volt battery charger, whereas the generic 1200 watt generator that I have, that employs brushes, will not operate my 12 volt 10 amp battery charger/transformer. So there is indeed a big difference when using a brush-less generator to power up transformers.

Have been running a couple of preliminary tests with two Hammond dry type 10 Kva single phase 600 volt step down transformers. Nothing out of the ordinary yet to be seen. (Perhaps a higher voltage is necessary for results) When using the output from the McCulloch into the low voltage secondary and stepping up to the 600 volt, then across to the 600 volt windings of the other transformer, then down to the low voltage windings, there is a substantial drop in voltage, almost half of what would be there if 600 volts was being placed into the high voltage side.

I am not in any way comparing this to Mr Morin's experiment as the transformer cores and windings he is using are no doubt a completely different style/design/setup etc. I do have to wonder however, if he is indeed getting 110 to 120 volts out of the 25 Kva transformer.

(Edit.... upon further consideration, perhaps he does indeed drop half of his voltage, yet is still getting 110, as he is tapping into single phase 220... and not using the tank casing ground/neutral)

If he has a substantial voltage drop across the transformers/windings, and I am not saying he does, then the heaters he has hooked up are not drawing their rated current. I am not sure what voltage would be required to turn the chop saw he is using, perhaps it will spin with a much lower voltage. Point is, he needs to prove his loading, if his voltage is not high enough going into the heaters, then he is not placing much of a load on the generator. The lower the voltage, the harder it is for the current to get through the 110 volt elements in the heaters.

It is my hope that he soon comes forth with some loading data that will prove what he is claiming.

[vidbid]

Inventor William Kober

http://youtu.be/LhLf_XXYlNk?t=45m

Moderator speaks of Gerard getting very ill and his girlfriend having a stroke, that there are some negative effects from certain high frequencies at high voltages.

Thanks for the patents references..

https://www.google.com/patents/US3320453

https://www.google.com/patents/US3310695

other patents by William Kober..

Regards,

VIDBID

[lorinrandone]

hello again
I apologize for you but I expected that Matt makes a comment about replicating this invention. purposely Matt, I'm (cristian alba and Open Source pe talked some time ago) one of those who greatly respects your pertinent to board a Sujet mode. Also Mr. Vidbid, which opened this thread, drawings, some autocad anything? I personally think we should respect the privacy of each'm going to retire convinced that the conflict has gone. Aaa ... sorry Vidbid glad to read you again
Regard lorin

[vidbid]

McCulloch Generator Patent



https://www.google.com/patents/US3324321

Regards,

VIDBID

[vidbid]

hello again
I apologize for you but I expected that Matt makes a comment about replicating this invention. purposely Matt, I'm (cristian alba and Open Source pe talked some time ago) one of those who greatly respects your pertinent to board a Sujet mode. Also Mr. Vidbid, which opened this thread, drawings, some autocad anything? I personally think we should respect the privacy of each'm going to retire convinced that the conflict has gone. Aaa ... sorry Vidbid glad to read you again
Regard lorin

Thank you, Lorin. Much appreciated.

Regards,

VIDBID

[ldrancer]

http://youtu.be/LhLf_XXYlNk?t=45m

Moderator speaks of Gerard getting very ill and his girlfriend having a stroke, that there are some negative effects from certain high frequencies at high voltages.

Thanks for the patents references..

https://www.google.com/patents/US3320453

https://www.google.com/patents/US3310695

other patents by William Kober..

Regards,

VIDBID

those people, where talking about no money and stuff.. that, zeitgeist thing. the girl in that video.

[ldrancer]

hey, look. check out this. click the picture to zoom, im using firefox, make it full size, and read what this says on teh back

or i mean just look at this

just quick check where i seen this, 1hp motor is what it has on it.

also, odd and i dont wantt o believe it as much, the crank is installed with the piston attached. head,cylinder is 1 piece.
or something like that. .. head, cylinder, case. its a 2stroke, im pretty sure its a late 70's or early 80s model moped

[vidbid]

Gerard's Newest Video



I watched Gerard's newest video. Pretty cool.

http://youtu.be/HJDretlCt8g

He says, in describing the coils of the generator:

Those are Aluminum wire coil by the way. They look like Copper, but they're not. They're totally Aluminum.

[vidbid]

SMART DRIVE MOTOR = Washer Motor



From what I can tell, Morin is saying that you can use an old washer motor (like the one pictured above) instead of a McCulloch generator because the geometry is similar.

For example: Samsung DC96-01218E WASHING MACHINE MOTOR ASSEMBLY

In this video, a man is re-wiring one of these types of washer motors to be a DC generator.

Fisher Paykel Washer Motor


Samsung Washer Machine Motor (Similar to Fisher - Paykel)

[BroMikey]

Finding patents

https://www.google.com/patents/US3324321

Regards,

VIDBID

Great work finding this stuff. Is it a complex arrangement?

Mikey

[vidbid]

Great work finding this stuff. Is it a complex arrangement?

Mikey

Credit for locating the McCulloch patent belongs, in my humble opinion, to lorinandone and Tishatang.

Credit for posting the newest Morin video belongs to the person who posted the link in another thread.

Please shout yourself out if you're that person.



A video of the Fisher-Paykel-type washer motor shows it being re-wired to produce LVHC (Low Voltage High Current).

However, I don't believe that is necessary.



I believe that one could use a three-phase step-down transformer, instead, to obtained the LVHC condition.

[vidbid]

History of the Smart Drive

PowerSpout - History of the Smart Drive - YouTube

[jimboot]

picked one of those washing machines yesterday from the local scrap metal guy for a few cents. Has the water pump too