Gerard Morin Energy

[BroMikey]

Here is one in QUEBEC right across from Maine the phone number
is 418-696-0465 only $75 bucks plus shipping.



http://www.kijiji.ca/v-achat-et-vente-divers/saguenay/generatrice-portable-mcculloch-1500-watt-1973-vintage/1167305763?enableSearchNavigationFlag=true

[BroMikey]

Here is one right near Montreal across the road from New York
he has some nice cords with it I guess. Another language

$150 plus shipping maybe $200 shipping in many cases.



http://www.kijiji.ca/v-achat-et-vente-divers/laval-rive-nord/generatrice-mculloch/1164983915?enableSearchNavigationFlag=true

[BroMikey]

Here is another one QC $150 call 450-378-6409

http://www.kijiji.ca/v-outil-de-jardin-cabanon-remise/granby/generatrice-mcculloch-electrique-portable/1161888857?enableSearchNavigationFlag=true

[BroMikey]

Gerard is back better than ever Thanks Gerard for all of your
encouraging work and your strong personality. Good to see you.

Excellent replicator.



[VIDEO]https://www.youtube.com/watch?v=7uwqnN596VM[/VIDEO]


[VIDEO]https://www.youtube.com/watch?v=U-L6_rVmU5U[/VIDEO]


[VIDEO]https://www.youtube.com/watch?v=cBFAe3rArCg[/VIDEO]

[BroMikey]

Gerard is back for us all as we are all like blind man stumbling
around for the keys to the natural universe.



Published on Jul 12, 2016

In this video, Gerard demonstrates some more tests and
conclusions, where it is clear now, Resonance is the key. Others
have taken the early pump setup from more than a year ago
I shared, and self looped, replicated with results, others were demonstrating unusual effects coming from their units. There
are many avenues to go.

My Goal has always been to understand this energy first,
before looping it.. because this will not get us anywhere, if we
don't first understand what we are dealing with. I've shown
over-unity on multiple occasions in the past, these were stepping
stones to the understanding of where we are now, and where we
are going with this understanding of resonance.

Everything I have developed with the bigger generator, my new
design overseas, and now this unit here.. were with the goal of
generating self sustaining generators. I have previously demonstrated
that I could get more out than we put in, defying established laws,
Under load. However, I was not satisfied with my understanding of
why this was happening, we know it over-unity, we saw it, we
tested it over and over with pole transformers, and various setups.
But these mean nothing, if you don't understand why it's happening.
This is why I have released many videos with probing questions to
the public. I am trying to open up your mind, before releasing
everything I have discovered. These tests are not to waste time,
or to have fun.. we don't have time for that. These tests are to
break down the box that has been created by the powers that be,
in every avenue, from Hydro authorities, to the very lies in the
textbooks. We are breaking these down on a weekly basis. I
have numerous professionals testing my units, and not one has
come back to rebuke these findings, because they are seeing
and testing for themselves.

More to come in the future. Open your mind to resonance, and what
it can do, every step of the way down the hydro lines, to the plug in
your wall. to the effects I show in these videos. The answer is right
in front of your face.



[VIDEO]https://www.youtube.com/watch?v=Q9YsuEeCTqs[/VIDEO]

[mikrovolt]

At times the lumberjack syndrom takes it's coarse

https://www.youtube.com/watch?v=MAimuDhxbI0

[BroMikey]

At times the lumberjack syndrom takes it's coarse

https://www.youtube.com/watch?v=MAhxbI0

Throw out your conditioned abstract subliminal mind fog and next
time bring a magnet motor and hook it up to that HORSE POWER.

Here let me get you on board since you are not thinking clearly.

[VIDEO]https://www.youtube.com/watch?v=sSz0MMUeHfE[/VIDEO]

[VIDEO]https://www.youtube.com/watch?v=gRlgcBXdI9s[/VIDEO]

[Belangers]

Gerard Morin Transformer Phenomenon Update

BroMikey and others,
I have found out how the Morin transformer amplification happens. I had this phenomenon working at one point using an electric motor (universal motor with no load) and two resistive element heaters, however couldn't do it again without the motor, and had no idea it had to use the motor to do the work.

If we look at Tinman's universal motor, his output load becomes his amperage at the input to the motor. The same with Lasersaber's universal motor, and this means we all have a massive breakthru. The Universal Motor initiates this phenomenon, but the shorted coil (that has a capacitor in series with the center tap internally) makes the shorting bar possible on the transformers. the transformer becomes an energy harvester, and for every resistive load added, free electricity becomes inbound, infinitely without destroying the dipole. This is because the energy pulses on and off and the generator's driving power forces the radiant energy spikes to become this free energy, which is proven by the added load that the energy gets colder, and when he uses less load, it disappears. I have finally figured this all out and you can read below to see why. To hell with the skeptics, it works Batman...

First I'd like to say it is much easier to use pole pigs or any plate type secondary over primary on linked dual core units submersed in oil due to efficiency, but we need to be using 2013 DOE transformers at a bare minimum.
Here is how it works:

If you look closely at Gerard's input, the secondary or low voltage bushings on the outside of the transformer seem to be shorted on the left side between the hot leg and the neutral. This couldn't be possible, because if it were, the fuse or circuit breaker on generator would blow.

The first item he used for the load is the key to it's operation. He uses a chop saw, which by the way utilizes internally a universal motor.

The shorting bar installed between the neutral and the left hot leg is key. That is where we think he is just shorting the two together , but if we look closely, you will see little leads connecting to the bushings in some way and I think it is a set of leads to the diode which makes pulsed dc. This will convert back to a sinewave on the output coil, but to create the radiant energy needed, we need a magnet generator and diode.

If we take the cover off of the top of the can, the bushings make connection to the internal wires of the can and are all connected with mechanical connectors, easily able to be remade and include a capacitor for 60 hz resonance in series to the neutral bushing, eliminating the short. If we add a shorting bar, the coil will be jumpered across and make no sense because I tried this and it pops the breaker on the generator so I tried a diode in series with the generator's output, which we see connected hiding behind the shorting bar, then internally a capacitor to create resonance at the frequency the generator runs at.

This creates a resonant rise and allows the back emf from the chop saw to fire back at the shorted coil, but it will not get back to the generator because of the diode. This means that the pulse will fire into the transformer's output secondary during it's brief off time between it's field coil running between the primary and secondary of the motor, then it steps the signal up through the transformers, hits the shorted coil with the capacitor and rings back toward the load with a massive rise in amplification during it's off time , draws atmospheric energy into the system and gets driven along with the next pulse driven by the generator back to the load as an accellerator works. The energy it picks up is radiant energy and it only reacts through resistances between 100 ohms and 200 ohms to convert the energy back to conventional energy. This is where an amplification happens, similar to Ismael Aviso's system. The conventional energy from the generator goes only to the chop saw. It remains exactly 1320 watts as the printed plate on the chop saw uses. This equals 120v x 11 amps, exactly what the amprobe tells us it is. When the heaters are kicked on, they do not up the amperage because they are running for free by radiant energy that has been amplified by the short and additional accelleration provided by the generator.


Good Luck to you all,
Marc Belanger
Dezeinstein Technologies

PS do not listen to anybody about the mathematical equations. Gerard is 100% correct, you can not measure the voltage, it is a bunch of harmonics and an Ac WAVEFORM as well as a resonant ringing all superimposed upon each other that will not be able to be read by digital meters. Also, OHM's law works in the opposite manner with radiant energy. The resistance needs to be high for the energy to flow. The higher it is, the more comes out, of course after it is dumped into a cap and used like an inverter circuit by puklsing the device on and off. This is what the heater circuit is, the heater pulses on and off for efficiency, this is why they run for free, the circuit inside is going on and off , converting the capacitively stored radiant energy and dumping it into the resistive element where the energy dissipates as heat. BTW, Amperage could only be read if the amprobe is detecting conventional amperage. Radiant energy has no amperage until converted. If it is detectaable, this means it is either superimposed, or it will convert to an unstable, very high current and high voltage and dangerous output once large AC caps are inserted into the system. I have found there to be 3 different type of radiant energy, all of them resistor/impedance multiplied, some more than others, depending on the material used in the element.

[BroMikey]

BroMikey and others,
I have found out how the Morin transformer amplification happens. I had this phenomenon working at one point using an electric motor (universal motor with no load) and two resistive element heaters, however couldn't do it again without the motor, and had no idea it had to use the motor to do the work.

If we look at Tinman's universal motor, his output load becomes his amperage at the input to the motor. The same with Lasersaber's universal motor, and this means we all have a massive breakthru. The Universal Motor initiates this phenomenon, but the shorted coil (that has a capacitor in series with the center tap internally) makes the shorting bar possible on the transformers. the transformer becomes an energy harvester, and for every resistive load added, free electricity becomes inbound, infinitely without destroying the dipole. This is because the energy pulses on and off and the generator's driving power forces the radiant energy spikes to become this free energy, which is proven by the added load that the energy gets colder, and when he uses less load, it disappears. I have finally figured this all out and you can read below to see why. To hell with the skeptics, it works Batman...

First I'd like to say it is much easier to use pole pigs or any plate type secondary over primary on linked dual core units submersed in oil due to efficiency, but we need to be using 2013 DOE transformers at a bare minimum.
Here is how it works:

If you look closely at Gerard's input, the secondary or low voltage bushings on the outside of the transformer seem to be shorted on the left side between the hot leg and the neutral. This couldn't be possible, because if it were, the fuse or circuit breaker on generator would blow.

The first item he used for the load is the key to it's operation. He uses a chop saw, which by the way utilizes internally a universal motor.

The shorting bar installed between the neutral and the left hot leg is key. That is where we think he is just shorting the two together , but if we look closely, you will see little leads connecting to the bushings in some way and I think it is a set of leads to the diode which makes pulsed dc. This will convert back to a sinewave on the output coil, but to create the radiant energy needed, we need a magnet generator and diode.

If we take the cover off of the top of the can, the bushings make connection to the internal wires of the can and are all connected with mechanical connectors, easily able to be remade and include a capacitor for 60 hz resonance in series to the neutral bushing, eliminating the short. If we add a shorting bar, the coil will be jumpered across and make no sense because I tried this and it pops the breaker on the generator so I tried a diode in series with the generator's output, which we see connected hiding behind the shorting bar, then internally a capacitor to create resonance at the frequency the generator runs at.

This creates a resonant rise and allows the back emf from the chop saw to fire back at the shorted coil, but it will not get back to the generator because of the diode. This means that the pulse will fire into the transformer's output secondary during it's brief off time between it's field coil running between the primary and secondary of the motor, then it steps the signal up through the transformers, hits the shorted coil with the capacitor and rings back toward the load with a massive rise in amplification during it's off time , draws atmospheric energy into the system and gets driven along with the next pulse driven by the generator back to the load as an accellerator works. The energy it picks up is radiant energy and it only reacts through resistances between 100 ohms and 200 ohms to convert the energy back to conventional energy. This is where an amplification happens, similar to Ismael Aviso's system. The conventional energy from the generator goes only to the chop saw. It remains exactly 1320 watts as the printed plate on the chop saw uses. This equals 120v x 11 amps, exactly what the amprobe tells us it is. When the heaters are kicked on, they do not up the amperage because they are running for free by radiant energy that has been amplified by the short and additional accelleration provided by the generator.


Good Luck to you all,
Marc Belanger
Dezeinstein Technologies

PS do not listen to anybody about the mathematical equations. Gerard is 100% correct, you can not measure the voltage, it is a bunch of harmonics and an Ac WAVEFORM as well as a resonant ringing all superimposed upon each other that will not be able to be read by digital meters. Also, OHM's law works in the opposite manner with radiant energy. The resistance needs to be high for the energy to flow. The higher it is, the more comes out, of course after it is dumped into a cap and used like an inverter circuit by puklsing the device on and off. This is what the heater circuit is, the heater pulses on and off for efficiency, this is why they run for free, the circuit inside is going on and off , converting the capacitively stored radiant energy and dumping it into the resistive element where the energy dissipates as heat. BTW, Amperage could only be read if the amprobe is detecting conventional amperage. Radiant energy has no amperage until converted. If it is detectaable, this means it is either superimposed, or it will convert to an unstable, very high current and high voltage and dangerous output once large AC caps are inserted into the system. I have found there to be 3 different type of radiant energy, all of them resistor/impedance multiplied, some more than others, depending on the material used in the element.

Yes i can follow this well, even tho I have been feeling lost and looking
for the keys without a clue. We all feel the pressure to make a break-
through, anything, something and if this is one I will be glad.

Thanks Marc, I'll keep reading this so I can do the test.Very
encouraging words to say the least.

[wantomake]

Marc,
Could you present a circuit of what you posted and any pictures of your research? If not that's ok.

Very interesting,
wantomake

[kenssurplus]

Are you sure?

Marc, you posted this:

If you look closely at Gerard's input, the secondary or low voltage bushings on the outside of the transformer seem to be shorted on the left side between the hot leg and the neutral. This couldn't be possible, because if it were, the fuse or circuit breaker on generator would blow.

The first item he used for the load is the key to it's operation. He uses a chop saw, which by the way utilizes internally a universal motor.

The shorting bar installed between the neutral and the left hot leg is key. That is where we think he is just shorting the two together , but if we look closely, you will see little leads connecting to the bushings in some way and I think it is a set of leads to the diode which makes pulsed dc. This will convert back to a sinewave on the output coil, but to create the radiant energy needed, we need a magnet generator and diode.

Is this the image you are referring to?

http://www.energeticforum.com/272564-post296.html

I don't really want to butt in here, but I think you guys are missing something major and are likely to get hurt by it.

Look in the picture of the pole pig that is in this post. It has FOUR low voltage insulated terminals NOT three as the SKI-MATIC shows. The two center terminals appear to be both neutrals which are tied together with a strap. The farthest away terminal appears to be unconnected (not shorted to neutral). The reason to have the neutrals separable like that is so you can do different phasing with the other half of the low voltage coils. This connection type would leave the second half of the low voltage coils open, and not loaded. If you insist on shorting this terminal to neutral, of course you will load down and kill the gen.

When dealing with this high voltage and pole pigs etc, you must be VERY certain of your connections and diagrams. In my view, it being negligent liability to present false connection diagrams and info.

[BroMikey]

Gerard Pole Transformer replication here.

3600watt generator running 7000watts on the output side.

So it really does not seem like we understand electricity.




https://www.youtube.com/watch?v=zfKfW2a8p9Y

All,

Whoever is interested in this topic, enough to at least post a reply to the thread, has demonstrated at least a willingness to talk about this setup or tech of Morin's. That was one of Mikey's initial requests. Coordination has been done by the O.P. / thread owner by self appointment.

Now comes the crux of the matter "winning the confidence of the guys interested". There are a number of qualified persons on the thread who are willing to do something, who have done something, and are willing to share about it. Some are very experienced working around High Voltage and High Power systems. Some don't even have the faintest clue how many amps can kill you.

If we do as Desa recommends, and go do something else, some of the guys with the high voltage knowledge and experience are likely to leave, if their confidence, or abilities, or whatever, are made to feel uncomfortable. Do you want to get hurt really bad? How about someone else? This stuff has the capability and WILL do so if given the chance. Its far better to work together very carefully rather that trying to learn it all by yourself.

If you want to talk to someone who has knowledge of things, then you have to use language that they can understand. If you try to use made up mumbo jumbo, then you will get only those that understand mumbo jumbo in your conversation. They guys who have experience with these high power components, understand AMPS as well as other STANDARD terms and procedures. That is part of the language you must use to converse with them. To try and belittle people, won't get anything done - on anyones part!

Now for all my spouting off, I have run pole pigs. I am not really comfortable suggesting anyone go out and play with them. It being similar to telling a kid to go play pin the tail on the donkey on the interstate blindfolded. You can see one of them here:
https://www.youtube.com/watch?v=fHdm4T7dDws
[VIDEO]https://www.youtube.com/watch?v=fHdm4T7dDws[/VIDEO]

If Gerard is interested in people understanding the tech, not just propping himself up as a Guru, then he should not be afraid to speak the language. The same for anyone else wanting to play.

[BroMikey]

......................

[VIDEO]https://www.youtube.com/watch?v=YPiFiwz8DXQ[/VIDEO]

[RoliK]

Hi,
take a look about this:
Simple Free Energy Devices

Roland

[BroMikey]

Hi,
take a look about this:
Simple Free Energy Devices

Roland

Good one Roland