Gerard Morin Energy

[BroMikey]

Gerard Demo

Here are my ideas of running a demo video. Watch the video again.

https://www.youtube.com/watch?v=3Spf5WVGgSY

We should use only a real personality like Gerard, who is willing to invite investor by being forth coming. This requires that the replicators show their faces to the world and are not afraid to be known by the world.

Open tests on camera following instructions for each individual experimental test plug. Starting with the basic Gerard layout. I will be the judge along with others.

I could do this but not many can it seems. The pigs are outdoor units and so could the genset be. So tests could be made in the open on a sun shiny day.

Also if you would like to donate to our replication, send me a message or post it here.

Thank you for your interest.

Michael Rowland (Central Kansas)

[BroMikey]

Hitby

@hitby

How are you doing with my views on project demonstration? Those are only my personal views and others may not feel that this is all that needed.

Are you able to respond to these ideas? We are on hold in a waiting mode.

David has sent the quote and I told him we will be sending this to our team players.

Tell us what you can or can not do. Mainly we need a person who is willing to respond to some changes. Mark has decided he wants to buy new transformers and of course we are going to need an individual who can follow rigid testing instructions by our team.

We want to stick to the Gerard example and not all of the other stuff floating around the web.

Can you comply under pressure

Thank you Sincerely,

Michael Rowland

[Hitby13kw]

Tell us what you can or can not do.

I can do anything, my early videos tried to demonstrate my ability to replicate others work with equipment on hand.

Mainly we need a person who is willing to respond to some changes.

I am a man of few words, to date I have been asked no questions, so I have not seen a need to make continual post to the forum, what changes do you think I need to make in my life?

Mark has decided he wants to buy new transformers and of course we are going to need an individual who can follow rigid testing instructions by our team.

If that's what Mark wants it would simplify the test and the interpretation, not having to do the math to compensate for differences in equipment between Gerard's work and our replication.

We want to stick to the Gerard example and not all of the other stuff floating around the web.

Sounds like good science to me.

Can you comply under pressure

Yes I can, however there is nothing that can be stated in a few lines of text that would be irrefutable proof of that ability, any such attempt would be interpreted by others as a pissing match and is very childish, I refuse to be called out.

All that being said, this started out as a "What can I do to help you voluntarily" type of event but it seems to be turning into a
"We want a technically qualified person to follow our instructions and not think for themselves" if that's what you want
- so be it - I am still willing to do that, but you will have to pay for my time, Let me know your thoughts.

My work will continue and succeed - regardless of your decision,
the only difference is if you will be part of it or not.

Sincerely,

Hitby13kw

[BroMikey]

Good to hear from You

I can do anything, my early videos tried to demonstrate my ability to replicate others work with equipment on hand.


I am a man of few words, to date I have been asked no questions, so I have not seen a need to make continual post to the forum, what changes do you think I need to make in my life?


If that's what Mark wants it would simplify the test and the interpretation, not having to do the math to compensate for differences in equipment between Gerard's work and our replication.


Sounds like good science to me.



Yes I can, however there is nothing that can be stated in a few lines of text that would be irrefutable proof of that ability, any such attempt would be interpreted by others as a pissing match and is very childish, I refuse to be called out.

All that being said, this started out as a "What can I do to help you voluntarily" type of event but it seems to be turning into a
"We want a technically qualified person to follow our instructions and not think for themselves" if that's what you want
- so be it - I am still willing to do that, but you will have to pay for my time, Let me know your thoughts.

My work will continue and succeed - regardless of your decision,
the only difference is if you will be part of it or not.

Sincerely,

Hitby13kw

I always admire a man for being able to express his personal viewpoint come hell or high water. I know you are a busy man so I figured I had better hit a few buttons to bring a response. I have a man of hold and I need to know what the team thinks.

It makes no difference to me who does the tests, I know of many who could do these tests, no problem. But if this is taking away from a mans bread and butter time that he needs to put food on his table, I can also understand that.

Thanks Hitby for your very open and to the point expressions.

It is posts like these that gets us all on the same page as the other man. As far as I am concerned a real man will hammer out what he is all about regardless of who likes it or who doesn't.

I will make the final decision, still you are very busy

Mikey

[BroMikey]

Genset

The McCulloch is declined and we have been directed to do a crowd funding.

Wise men always detect out of order comments.

Our loss of the Genset is no big shock. We will find what we need Hitby

I have a $200 pledged and climbing.

Mikey

[OrionLightShip]

This is a photo of a windmill generator based on the principal of transverse magnetic flux. The Double D Stator coils look similiar to the McCullough GenSet so I thought it might have some bearng here.

We are all so used to the "salient pole paradigm" that the fundamental principle is easy to overlook.

The gen in the picture uses a ring magnet that has been radially magnetized. The field from the inner and outer diameters or the rotor is brought out to interact with the stator structure which wraps the magnetic field around the coils, which, of course creates current flow.

I don't have a McCullough sitting in front of me so I can't say it it the same, but it is what makes sense to me. Spin magnets around a stator that directs the flux around the coils.

At any rate, good luck!

[Dog-One]

This is a photo of a windmill generator based on the principal of transverse magnetic flux. The Double D Stator coils look similiar to the McCullough GenSet so I thought it might have some bearng here.

We are all so used to the "salient pole paradigm" that the fundamental principle is easy to overlook.

The gen in the picture uses a ring magnet that has been radially magnetized. The field from the inner and outer diameters or the rotor is brought out to interact with the stator structure which wraps the magnetic field around the coils, which, of course creates current flow.

Also very interesting is what looks like "interrupters" -- a concept brought out by Sayair's RamaGen video. In fact, I would say this is his generator using the flat McCullough design.

Wow! Two for one day. What more could you ask for.

Thanks much for your post OrionLightShip.

[BroMikey]

This is a photo of a windmill generator based on the principal of transverse magnetic flux. The Double D Stator coils look similiar to the McCullough GenSet so I thought it might have some bearng here.

We are all so used to the "salient pole paradigm" that the fundamental principle is easy to overlook.

The gen in the picture uses a ring magnet that has been radially magnetized. The field from the inner and outer diameters or the rotor is brought out to interact with the stator structure which wraps the magnetic field around the coils, which, of course creates current flow.

I don't have a McCullough sitting in front of me so I can't say it it the same, but it is what makes sense to me. Spin magnets around a stator that directs the flux around the coils.

At any rate, good luck!

Thanks for the visit. We all need a little light in this very dark world. Your information as always is enlightening

I am getting the idea around the web now, trolls everywhere trying to disrupt and a few good man helping each other do the impossible.

Mikey

[mscoffman]

Partially the Double D star is similar to the McColloch but not exactly.

In the Double D star it appears that the magnetic poles that are real
magnet poles. Lots of them actually, this many poles past the stator
coil per turn is what makes this a good low speed wind alternator.

In the McColloch the magnetic poles that interact stator coils appear to
be virtual poles. A homopolar disc magnet magnetized across it's
thickness form eddy currents on a copper or aluminum disc. Those eddy
currents create virtual magnetic poles that interact with the stator coils.
The McColloch generator generates 60Hz at 3600RPM which means that
only one pole pair crosses the stator coils per revolution. This method
may be the key to getting the output load able to excite the generator
further.


In many other generators two pole pair cross output coils per rev. which
means 60Hz. at 1800RPM this is more compatible with the diesel prime
movers.

:S:MarkSCoffman

[BroMikey]

Finding A Mite-E-Lite

Okay David with the McCulloch has left the door open for our decision but I declined it for this reason. First he called me and told me $380 for shipping next he says he found out it would be more like $200 and next he changed it back to $380 just for shipping.

That is way to much. I don't like being jacked around. Even if I had the money now I wouldn't get it from him.

I am looking for another low priced bone pile near the area where it is going. All I really need is a rotor and I will find it.

Also I have some of these Paykel motors.

https://www.youtube.com/watch?v=PY3nmpvgDuI

I am not a super scientist so my look at what might be going on in many experiments is basic. The radiant is produced by passing a magnet over coils.

I will say again.

The radiant is produced by passing magnets over coils.

No flowery phrases, right down where we all live.

Free energy to the one who can pedal fast

The rest of the people are to fat and lazy anyway

[mscoffman]

Bro Mikey,


I think you should let Turion chime in. That maybe worth doing before
we go too much off topic posting. I would recommend to him trying to
duplicate Gerrard Morine's HV set-up as closely as possible. Some success
there plus the ability to swap equipment would make this project easily
restartable.

---

I have been looking at the youtube area concerning variable speed motors
for example the HVAC X13 ECM motor interesting as it is a permanent
magnet AC motor. I also like phase synthetic 3phase motors for driving
things.


:S:MarkSCoffman

[Turion]

Update

I have TWO of the McCulloch generators. The first is the small one run by a 2 1/2 horse Briggs and Stratton Engine. I don't know what the output on that one is. The second is a 3300 watt unit run by an 8 hp Briggs motor.

My intention is to have the gas engines removed from BOTH of these units and replaced. I will replace the larger gas engine with an AC motor so that I can see if the setup can be looped. I will replace the motor on the smaller one with a modified (Matt's modification) DC motor for some experiments I want to conduct.

I have two pole pigs set aside for me that I can pick up a week from today. It will be the week after that before I can get to a machine shop to get the modifications done on the two generators.

ALL of this (future expense) is dependent on the sale of my house which is in progress. I am also in the process of moving, so my NEW shop is in NO CONDITION to do ANY experiments, and probably won't be for a couple weeks. So I am up in the air for a bit, but once things settle down (The moving van comes Monday) I will be able to focus on stuff. I have several projects I need to complete, including my OWN generator project, the Steele Braden generator, which I am VERY interested in completing, motors to rewind, coil cores to test. You name it. It's a damn good thing I am retired and can work on this crap full time (when not working on remodeling my house) because I have a really huge pile on my plate.

I am NOT asking for money for any of this. I paid for the two generators myself. I will pay for the pole pigs myself, and I will pay for the generator mods myself. I have enough test equipment to give accurate test results. All I need is some time. Which is WHY I said I would be replicating. Whether I am the first or the fifth, it doesn't matter. I will still get it done, mostly because the one person whose test results I trust is me. There are folks out there who will fudge the results or claim something that actually works does not. That is why I replicate those things that interest me regardless of what other people choose to do.

I will get this done too, but it is going to take me some time. That's the bottom line. Ask Steele Braden. It has been MONTHS since I started on a replication of his generator. I have all the parts, just not enough time to get it done. I had to remodel my house to get it sold. Now I have another house to remodel while I am living in it, and after that an entire retirement home to build. I am all about the projects.

Here's a pic of the two gens, and one of the mess that is my shop at this point. My shop is only 10x23, and it is packed full of crap that needs to be sorted and put away.

Dave

[BroMikey]

Great Progress

I have TWO of the McCulloch generators. The first is the small one run by a 2 1/2 horse Briggs and Stratton Engine. I don't know what the output on that one is. The second is a 3300 watt unit run by an 8 hp Briggs motor.

My intention is to have the gas engines removed from BOTH of these units and replaced. I will replace the larger gas engine with an AC motor so that I can see if the setup can be looped. I will replace the motor on the smaller one with a modified (Matt's modification) DC motor for some experiments I want to conduct.

I have two pole pigs set aside for me that I can pick up a week from today. It will be the week after that before I can get to a machine shop to get the modifications done on the two generators.

ALL of this (future expense) is dependent on the sale of my house which is in progress. I am also in the process of moving, so my NEW shop is in NO CONDITION to do ANY experiments, and probably won't be for a couple weeks. So I am up in the air for a bit, but once things settle down (The moving van comes Monday) I will be able to focus on stuff. I have several projects I need to complete, including my OWN generator project, the Steele Braden generator, which I am VERY interested in completing, motors to rewind, coil cores to test. You name it. It's a damn good thing I am retired and can work on this crap full time (when not working on remodeling my house) because I have a really huge pile on my plate.

I am NOT asking for money for any of this. I paid for the two generators myself. I will pay for the pole pigs myself, and I will pay for the generator mods myself. I have enough test equipment to give accurate test results. All I need is some time. Which is WHY I said I would be replicating. Whether I am the first or the fifth, it doesn't matter. I will still get it done, mostly because the one person whose test results I trust is me. There are folks out there who will fudge the results or claim something that actually works does not. That is why I replicate those things that interest me regardless of what other people choose to do.

I will get this done too, but it is going to take me some time. That's the bottom line. Ask Steele Braden. It has been MONTHS since I started on a replication of his generator. I have all the parts, just not enough time to get it done. I had to remodel my house to get it sold. Now I have another house to remodel while I am living in it, and after that an entire retirement home to build. I am all about the projects.

Here's a pic of the two gens, and one of the mess that is my shop at this point. My shop is only 10x23, and it is packed full of crap that needs to be sorted and put away.

Dave

Nice Going Dave

You really are a fire brand for experimenting. I will look forward to your work in the next months.

So far we are having trouble finding a decent price for a generator delivered.

Pole Pigs are no problem. I think 2 microwave oven transformers could show some results on a smaller scale like the tiny ignition coil setups.

The big pigs will be the best to power the shop first and then the house.

I am glad to see your finding gensets.

Mikey

[BroMikey]

Mite E Lite

I have found another Generator for approx $200 with shipping give or take. It is a 3300watt unit.

I am planning a drop as early as next week so be ready with donations, Please

Mikey

[BroMikey]

3300 watt McCulloch Mite E Lite.

Okay ladies and gentlemen the Genset will be on location the 21st or the 28th of FEB. For now Hitby13kw has $50 in his account toward this purchase.

Mark if you would like to donate $50 that would be fine, let me know if you can and I will send you a way to pay. I assume you still want to help in some small way. I don't have a 50kw pole pig yet but we can make some tests with ELECTROSTATIC Energies using a variety of pole pigs already on site.

Thanks to Turion and 10K we can get this Generator and get it running within a month. The Genset throws a spark but sat around plugging up the carb, you all know the drill.

I have double confirmed both seller information as well as the destination.

It pays to look in Craigslist. I have been checking the local area where it is going, Bingo, we got what we need.

If someone would like to donate $50 give us a reply. All data is going to be given out freely to everyone. I am raising money to fund this Gerard Morin high Voltage experiment. I do not get any money.

You will donate directly to Hitby13kw.

Let me know who wants to make a pledge. We are at $200 so far.

Thank You

Michael Rowland (Central Kansas) AKA Mikey

I have found another Generator for approx $200 with shipping give or take. It is a 3300watt unit.

I am planning a drop as early as next week so be ready with donations, Please

Mikey