Gerard Morin Energy

[Asgardian]

Great update and welcome , thank you!

You are definitely the man for the job, you seem very well equipped with all the testing equipment.
Keeping the Gen far away is so much better
Here's hoping you start load measurements this weekend, hoping anyway .

[Hitby13kw]

So now we know. We are sending a square wave into our Tesla Transformer low side, but what about HZ? Are we running at 60HZ?
Mikey

Bro - I Knew that I forgot to mention something, . . . Yes - the generator is puting out 60Hz.

Hitby13kw

[BroMikey]

Great update and welcome , thank you!

You are definitely the man for the job, you seem very well equipped with all the testing equipment.
Keeping the Gen far away is so much better
Here's hoping you start load measurements this weekend, hoping anyway .

Yes welcome Asgardian

We also have another secret admirer Chris S who felt the call to rescue Gerard from his state of confusion.

Chris and Hitby are our "guys of the week" Chris reached out to Gerard and in the process learned specific things. It must have been a good visit from what I see in the video.

Hang on Gerard we are almost there. @ Gerard we knew it worked before you showed us your pole pigs. It is just that we never thought of using such big transformers (Well i never did).

Also if anyone HAS one of those 24vdc motors that Gerard is powering with 36vdc (Well it probably drops to 28-30vdc real fast then hangs there) let me know what an amp draw might be like.

I think 3-4 amps is normal for those motors under a moderate load such as we see. Now this all gets quite confusing at times for the new comers because one minute we are talking about Gerards latest video and the next minute we are hashing it out on pole pigs.

Let me refresh each of you if I may. 500 pound pole pig transformers produce high voltages in the electrostatic range from 120vac and has nothing whatsoever to do with the cordless drill battery supply experiment.

It is a cute experiment that ends up at the bottom of the bin, yes. But it leads you in the right direction. Good stuff to blind men stumbling around in the dark. We need it, but do not forget that the main thrust for me is the super high voltage experiment to power a home.

Like the Don Smith/Tesla/whoever that uses step up voltage converter only to transform them back, we are exploring Gerards practical example with a vengeance.

This use of pulsing pole pigs is not new, to get huge quantities of high voltage electrostatic charges. Why do you think Hitby has these?

We could spend years learning the best use of pole pigs if we didn't have Gerard's example. The first thing people are going to ask is "why didn't some of the older inventors remind us of this way to OU. The answers might be "Because HV can kill you" you can't tell the public just anything.


Kurt's mini pole pig experiment using oil filled car coils from the 1970's operates at a much higher frequency and has shown COP's of 20 and greater.

So when I post various ways to reach high voltages, it is because I want to stimulate the use of the old experimental tools. Wheels with bands, brushes, magnets, what have you can produce extreme high voltages at safe levels for desktop investigation.

[Matthew Jones]

Its been a while since I did but I did a great thing. I clicked "User CP" on the top bar. It take you to your preference page. On the left hand tool bar under "Settings & Options" You'll find the "Ignore List".
I added "BroMikey"
To that list.

Since then, the forum has gained back its dignity and the feel of a group of adults congregating to discuss real material to experiment with. It was the best thing I have done in a year. I highly recommend it to anyone who is growing tired of the nonsense and babbling in over sized text.
Its like Aspirin on Saturday Morning.

Matt

Just wanted to make sure no one missed this. Think about it encouraging a child to act out, is it the right thing to do?

Cheers
Matt

Oh ya Mikey I can't see what you post, its been blocked. So there is no reason to make 8 post after my comment. OK you drunk Junky pedophile from detroit.

[KimK]

Big text

matt
I like big text. It's easy to read.
I don't get you. I'm just a working man
having a great time leaning about somthing that the intellectuals say does not exist.
I do learn from Bromikey. On the other hand there is you. GROW UP.

[Asgardian]

@Everyone

See what I mean, Matt is above the law here at this forum. He name calls, slanders people and thinks nothing of it.

I rest my case. It is this kind of action that drives the majority away to a site where fair play is practiced. The rules are there in the site to follow, but Matt is not required.

Who knows what will become of this forum now. The trend to background network is taking over with the select private parties and normal operations of the past are diminishing.

Whatever ya gotta do. You have been warned.


UFO and others have stated these same trends. Calling people sex perverts is a crime yet these people think nothing of it.

Matts will come Matts will go, some are paid, others are not...it's very easy to disrupt Forums like this.
I just ignore them, it works for me.

[10k]

Matts will come Matts will go, some are paid, others are not...it's very easy to disrupt Forums like this.
I just ignore them, it works for me.

Thanks matt,

You convinced me to donate $50 to the indigogo campaign.

Anyone else want to answer matt by donating, even, if its a dollar?

Vote with your money, not with your mouth

First they ignore you, then they laugh at you, then they fight you. Then you have won.

[BroMikey]

Thank The Lord for sanity. Thanks Yall.

Here is a clip from the energetic site forum rules

User Conduct and Obligations:

You agree to follow all applicable laws and regulations when using this website. Furthermore, you agree that you shall not:

a. upload, post or otherwise transmit through or to this website any content that:

1. is unlawful, abusive, threatening, harmful, obscene, lewd, offensive, defamatory or otherwise objectionable;


It is the same on every site but almost impossible to enforce.

Thanks matt,

You convinced me to donate $50 to the indigogo campaign.

Anyone else want to answer matt by donating, even, if its a dollar?

Vote with your money, not with your mouth

First they ignore you, then they laugh at you, then they fight you. Then you have won.

[BroMikey]

Ladies and Gentlemen

I have good news. It seems someone has donated a $50 bill to get this work completed. So far we have we have taken in $300. This is very stimulating, to think there are people out there who remain anonymous yet give to help us get this test underway.

We are just getting started and the heat is on, people shooting at us as beginners worried we might have O.U. when they can't seem to get an extra jewel after 20 years of work.

When I came to this site I followed directions building a John Bedini Energizer and cap dump. All of them got far more energy back than a conventional system would.

I feel bad for people who don't see it but we are not going to back up for the nay sayers.

The pole Pig test will be the same deal. HitBy13kw has already confirmed our suspicions about the Genset, showing a waveform that is half square wave and half sinusoidal.

One man I learned a lot from is John Bedini. Setting up 100's of hours of repeat video lectures on the edge of my seat in wonder. John has left an indelible impression on me as his work has put the final touch to many of my studies.

One giant step to take with John B. is to follow impulse series. You see it seems that this McCulloch may be much like an impulse generator. We have learned so much and want to thank each of you for your kind regard.

We are very careful what we buy with the donations we receive. I will post a record of sales and possible services.

It is a wonderful thing to be united in a common cause to help one another.

Let me say to each of you "God Bless You"

Also let us not forget that this work is always open to see. Anyone and everyone can see it. Share it with your friends today.

Mikey

[BroMikey]

Here are some of the impulse talks from John B. This exact circuit may not be directly related to every project but what we learn from it is that energy can and does enter into a circuit without knowing where it is coming from specifically. From out of nowhere the energy shows up.

John Bedini have given a great deal of his life to magnets firing coils to make impulse waves from square waves.

The McCulloch Genset has two huge magnets that are not normally found in today's generators. The old engineers thought different in the 50's.

In these video clips John is showing how energy travel on one wire.

So this brings us to a new conclusion about Government run school curriculum. These Gov/controlled schools give us half truth's.

We learn some good things in schools such as how to read and write. Then the math is good, 2=2=4. When it rolls around to biology we get philosophy and atheism. When it comes to science and physics we get gibberish.

The so called Higher Learning can not recycle energy yet a school girl can do that.


https://www.youtube.com/watch?v=_rbvhvhf8-0


https://www.youtube.com/watch?v=zYN9jtT14NY

[BroMikey]

Same Character

Electrostatic energy displays all of the same characteristics as high voltage. The pole pigs produce this phenomena, watch how it acts.

https://www.youtube.com/watch?v=EIQ8M44kXlQ


https://www.youtube.com/watch?v=qh5BmMTSoCg


https://www.youtube.com/watch?v=p10OUADRr2M


https://www.youtube.com/watch?v=sAHNASTb9J8

[Matthew Jones]

LOL...Look BroMikey has invented people who enjoy him. LOL. 3 new people all of sudden supporting the big BM (Ya I used the initial intentionally). The personalities almost in unison.

We'll add multiple personalty disorder to list. LOL

Matt

[BroMikey]

Hello mad scientist types

Here is an Electrostatic Voltmeter but I don't really understand the specs. I found this cheapo used Meter on ebay or do we even want one?

Below are the specifications. Also the link to the used tool.
Anyone? Understand it? What does it mean when it says 0-1400v +or- ratio 100:1?

What about it HitBy? Does that mean for every 1 volt showing up on the screen it is really 100 volts but it could be 1400 v less or 1400 volts more?

If so the screen shows 535 volts or approx 50,000 volt MAX, not bad for $50 bucks AAA?

Anyone can help me out if they know.

Trek Electrostatic Voltmeter 115vac Model 565




Brand: Trek
MPN: 565
Model: 565


Item specifications:
Brand
Trek
Model
565

Voltage
115 VAC

Range:
0 to +/- 1400VDC
Ratio 100:1

This unit was tested operational




Trek Electrostatic Voltmeter Model 565 | eBay

[BroMikey]

Here is your first installment of LINE TRANSFORMER handling practices. Rubber helps to insulate you.

I will be back with more on safety.

Watch this line man pull a poll transformer from the mains. We won't be doing it like this but it still shows the standard precautionary measure for handling high voltage.

https://www.youtube.com/watch?v=QMWGIawa_Fo

Lineman Training Course on Pole Top Equipment - Transformers | T&D PowerSkills Lineman Training

[Hitby13kw]

Electrostatic Voltmeter

Hello mad scientist types


Trek Electrostatic Voltmeter Model 565 | eBay

That is a nice find, Everyone likes Digital displays, it is tempting but it does NOT include a probe . . .
ebay does have others that do include a probe - but more

Hold tight - I do have a few of the older Analog
SENSITIVE RESEARCH ELECTROSTATIC VOLTMETERS

At this stage of testing we do not need this - Yet (if we see fields with my meters, we may want a digital readout at that time)


Hitby13kw