Gerard Morin Energy

[BroMikey]

Thanks Wantomake, I am glad to hear people are watching and waiting for the next tests. We don't quit easy on a project.We have everything here. Most success is stumbled upon while testing.

We are living the dream and that is what makes people mad I guess

Gene has some interesting calculations, I would love to see that video Gene.

Mikey

Bromikey,
We are here. You can't see all that support this effort. I'm still testing and wanting to get positive results.

It would be great to build this exact setup myself to prove this once and for all to myself. You can't find the same generator, those that have them want an arm and leg plus over charge for shipping. You can't find an oil filled transformer near by.
I'm not an inventor just the common person who wants to be free.

This is a practical invention. Imo.
The parts need to be accessible.
Must be mobile.
Take the elements.
Affordable to all.

Yes I know what some will post after this. You're dreaming, living in fantasy world, wishing or believing. Yes to all.

Most of all hoping,
wantomake

Hi Wantomake,

Its ok to hope and believe so long as you then do the Legwork to then Know.

If you're ok sitting on Hoping and believing you should probably find a religion and settle in...

I would suggest the reason Gerard went to pole pigs is because they cost much more and harder for people to get their hands on.

The ones who actually paid for and built the drain pump setups, at least the ones who were Honest and capable, measured those systems and found them to be underunity.

When such was beginning to be widely made known Gerard switched up to pole pigs and the mcculloch... He never "finishes" the work on any of his setups, he makes a bunch of hot air half qualified statements and does No measuring to back it up.

I shared with you how to get a General assumption of the output Current at the measured voltage. (take the watts of the lamp divided by the volt its rated for to get the amps that would be going thru it at the rated Voltage.)

However that assumes the applied voltage is the rated voltage for that Amprage to then flow. Any Voltage LESS than that rated voltage will result in an amprage flowing that is LESS than the rated Amps resulting from computing those watts. (I showed this in the bedini sg video I put on my morin replicaiton youtube channel where the 300watt lamp should have 2.5amps thru it, but at 60vdc into it its only got a MEASURED 1.5amps or so thru it... )

Anyways I think thats it, if you have questions, I will try and be helpful. I've no interest in arguing opinions or distracting you from what you seek.

Hope that helps.
Gene

[wantomake]

Good advice

Thanks Gene,
I'm a thirty year ordained missionary (I plant and build churches in Japan)so that's good advice. Spending my life giving hope as well a living it is what my Japanese wife and I do.

But I started this alternative energy as a hobby but found studying and replicating is a challenge, but one day during testing the 3BGS I saw something that changed my thinking. The dead battery (LA car)was acting strange while lighting two 50 vdc bulbs. The voltage rose and fell while lighting both bulbs attached across it. How?
But it only did it once. There was no overunity, or underunity, it spoke to my heart that Tesla wasn't crazy, but was a visionary with a belief that drove him. This my friend is why, even with basic electronic background, I still dream and hope. And study and learn a lot thanks to those like you that help me.

So it's on my Youtube channel-skyflight1able. I only have two, it's the two bulbs with fluke meter one.

I will ask for help if I can't find it online,
Thanks again
wantomake
PS: Spoke to Mr. Morin on the phone, said he's willing to help me understand more. Nice guy.

[Turion]

wantomake,

Regarding your video
https://www.youtube.com/watch?v=Dwk_bFXqiac

This is why I have spent the last 9 years of my life working with the 3BGS setup. The first time this happened to me, I was able to run loads (BIG LOADS) off battery three (using an inverter) and it would cycle exactly like you show in your video. It was doing exactly the same thing, only I had the motor and the other two batteries connected. It lasted for several WEEKS powering loads, but then it stopped when I took it apart, and it has never worked the same since. I have had other successful runs...once for over a week before it quit, and once you have seen what is possible, no one can convince you that it is NOT possible.

I have seen that this happens when battery 3 flips polarity, but that does NOT appear to be the case in your video.

Sorry for bringing this up on this thread. If you want to talk to me about it, PM me any time.

Dave

[wantomake]

Good times indeed

Thanks Dave,
I will pm you, but stopped testing that setup after trying so many bad batteries. If Matt gets around to his new generator I'm ready to build it.

Sorry to post here on different subject,
wantomake

[BroMikey]

That is quite alright with me guys. Gen/motor or motor/Gen whether Gerards or other wise could charge a battery as well as running other resistive loads such as light bulbs.

It's all the same to me.

I wonder what would happen if you connected a battery to the Gerard Morin setup?

I might give Gerard a call too, if I had his number. I think HITBY said he had it also.

Maybe HitbY got him on the horn already.

@wantomake

That is wonderful to hear you speak about spreading the GOOD NEWS of JESUS CHRIST and HIS salvation to sinners through HIS precious BLOOD by setting up Churches.

May the Lord Bless your work.

Mikey

Thanks Dave,
I will pm you,
wantomake

wantomake,


This is why I have spent the last 9 years of my life working with the 3BGS setup.

Sorry for bringing this up on this thread. If you want to talk to me about it, PM me any time.

Dave

[pedroxime]

Barbosa-Leal

Hi BroMikey and Hitby

Clarence, the guy from overunity.com, is having success with the Barbosa-Leal replication.

Basically are two transformers and a net of ground rods. He is using 110v to capture electrons from the ground, imagine how much you can take with 12000v-14000v

[BroMikey]

Hi BroMikey and Hitby

Clarence, the guy from overunity.com, is having success with the Barbosa-Leal replication.

Basically are two transformers and a net of ground rods. He is using 110v to capture electrons from the ground, imagine how much you can take with 12000v-14000v

Thank you very much

https://www.youtube.com/watch?v=yHkqn2cG-no




Energy from the Ground - Self powered generator by Barbosa and Leal




Energy from the Ground - Self powered generator by Barbosa and Leal

[wantomake]

bad videos

Thanks Bromikey,
Really interesting, but those videos are hard to understand. I downloaded the circuit from ou site. I have everything to do this but you want to discuss a different subject here?

The OU site, video's, and especially me are not clear so will hold off until further study.

wantomake

[genessc]

A missionary eh? As long as you find it fulfills you, thats Great.

This is the vid you reference eh? https://www.youtube.com/watch?v=Dwk_bFXqiac

So the 12vdc batteries are setup with 6 x 2 volt cells in each 12vdc battery. It would be really interesting to be able to get inside the "bad" battery so you can measure the volts on each of the 2 volt cells eh? I wonder if some cells inside the totality of the 12vdc battery are inverting for some reason...

Course another reason you see that sort of volt drop on the batteries is when one of the internal cells shorts out... so that could be indicating some filament from one plate in one cell maybe reached across and touched the other plate in 1 or 2 of the 2 volt cells. That would then Short that cell out and you'd see that instant volt drop as you note on the DVM.

In this latter case you would also still benefit from being able to get into and test each cell in the 12vdc battery, as the bad cell would register 0 volts if its internally shorted...

This is whats sometimes called the heat death of a battery as the heat deforms the plate and the deformed plate then starts to come apart and if some piece falls off and shorts it out, 1/6th of the total capacity is no longer available to do work...

Maybe if you see that happen again, see the volts drop by 3volts, take the load off and check each cell in the battery and see if any note a short... the continued loading could be breaking down the thread growth after its established which is the why for why you would want to stop the load right when it drops to 6vdc...

All of thats up to you man, however you wanna go at it. Those are what I'd look at if I saw the effect on my bench, so wanted to share anyways.

Good luck!
Gene

P.S. the nicest people are some of the biggest leeches out there... I don't use Nice as a judge marker, I use practically useful as my measuring rod...

Thanks Gene,
I'm a thirty year ordained missionary (I plant and build churches in Japan)so that's good advice. Spending my life giving hope as well a living it is what my Japanese wife and I do.

But I started this alternative energy as a hobby but found studying and replicating is a challenge, but one day during testing the 3BGS I saw something that changed my thinking. The dead battery (LA car)was acting strange while lighting two 50 vdc bulbs. The voltage rose and fell while lighting both bulbs attached across it. How?
But it only did it once. There was no overunity, or underunity, it spoke to my heart that Tesla wasn't crazy, but was a visionary with a belief that drove him. This my friend is why, even with basic electronic background, I still dream and hope. And study and learn a lot thanks to those like you that help me.

So it's on my Youtube channel-skyflight1able. I only have two, it's the two bulbs with fluke meter one.

I will ask for help if I can't find it online,
Thanks again
wantomake
PS: Spoke to Mr. Morin on the phone, said he's willing to help me understand more. Nice guy.

[wantomake]

As far as I remember

Thanks Gene,
No I tested each cell in the bad battery before I used it in the setup. Because if you didn't keep a constant load across battery #3(bad) it would start to charge and desulfur, becoming a "good" battery. And after this event I tested again for heat death, which I'm a witness to, but no cells were not shorted. That was over a year ago. And as you try different bad batteries, you just move on.

Dave, what do you think it was? You are much more advanced with the 3BGS than I am.

wantomake
PS Yes that's the video, didn't have time to link it, was headed to birthday party. Sorry.

[BroMikey]

Thanks Bromikey,
Really interesting, but those videos are hard to understand. I downloaded the circuit from ou site. I have everything to do this but you want to discuss a different subject here?

The OU site, video's, and especially me are not clear so will hold off until further study.

wantomake

That was a suggestion to HIYBY for the GERARD MORIN POLE PIG TRANSFORMER CIRCUIT. The circuit centers around grounding and sending a radiant pulse into the earth and when it comes back the energy to more.

Just simple grounding, coupling with a few turns of BIG wire.

In case you and many others did not know the DON S, T. KAPAGEN, TESLA and many more use specialized grounding strategies.

It is my limited understanding about this grounding means for radiant energy amplification or multiplication. These replications are in major free energy guide books.

This video is clear https://www.youtube.com/watch?v=wbNvUZT4NC4

Look for the Patrick Kelly stuff for more information. I need to go find it myself.

Mikey

[Hitby13kw]

Patrick Kelly stuff

Added the needed link

[SIZE="4"]
Look for the Patrick Kelly stuff for more information. I need to go find it myself.

[BroMikey]

Added the needed link

Thanks Hitby

Page 214 http://www.free-energy-info.tuks.nl/PJKbook.pdf



I emailed Gerard he is going to see.

[wantomake]

Been there

Bromikey,
I spent several hours reading and watching the same videos and pdfs. That exact video isn't focused or clear, can't see the meters or understand the presentation.
Maybe it's me or this kindle fire I use. Also a year of OU site produced no real replica.

My own test of Tesla idea to send a shock into this large capacitor we live on was proof to me it works. I just buried two pieces galvanized metal(each piece 1 foot long) horizontally about two inches below ground. Connected pos and neg one to each piece. Connected fluke across them. Sit 24 volt battery on the ground with pos connected to pos piece and tapped lightly(about 5 seconds between) neg of other piece. Meter would show battery voltage, then go off scale. Very kool indeed and proved to me Tesla is right.

There is potential there,I just don't know how to harness it.
wantomake

[Hitby13kw]

My own test of Tesla idea to send a shock into this large capacitor we live on was proof to me it works. I just buried two pieces galvanized metal(each piece 1 foot long) horizontally about two inches below ground. Connected pos and neg one to each piece. Connected fluke across them. Sit 24 volt battery on the ground with pos connected to pos piece and tapped lightly(about 5 seconds between) neg of other piece. Meter would show battery voltage, then go off scale. Very kool indeed and proved to me Tesla is right.

There is potential there,I just don't know how to harness it.
wantomake

@wantomake, Got a few ideas on how to harness it, but I need to see it first. Have a few questions to ask, When you did this experiment: I see that you had the galvanized metal 2 inches underground.

1. About how far apart were they from each other?
2. Did you try them at different distances?
3. How were the two electrodes oriented relative to the earth’s magnetic poles?
4. Did you try that in different configurations?
5. Did you check the DC resistance between your two electrodes before and after the test?

This sounds like it may be worth investigating, just wanted a place to start from.

Looking forward to your reply!!!!

Hitby13kw