I hereby would like to present the Unity Generator and the Free Energy Party.
The Unity Generator is an energy multiplier / QMoGen with a PMDC motor driving a 10KW PMAC generator.
Developed by the Unity Corporation and crowdfunded with the help of the Free Energy Party.
I am not the inventor nor the initiator of the FEP [Free Energy Party].
I am one of the admins of the party and a fellow free energy enthusiast.
If allowed I will use the following posts to introduce all to the Free Energy Party and its unique platform to securely bring out technology's to the public through Underground Manufacturing.
Now back to the generator!
11-29-2014
https://www.youtube.com/watch?v=9t4H3MoX8Ww
We showcased the generator [after a small introduction of the FEP] running for the first time without a LOAD, demonstrating overunity.
1-5-2015
https://www.youtube.com/watch?v=6W8ymwwdU0s
We showcased the generator running on load showing the following measurements.
Transcript of video
---------------------------------------------------------
IN : from mains to AC > DC PSU
2.6A @ 110V
2.3A @ 110V
Total 4.9 Amps @ 110V = 539W
---------------------------------------------------------
Used power PMDC Motor
1.3A @ 39.6V = 51.48 watts
OUT from Generator to Capacitors
7,4A @ 123.5v AC = 913.9W
7,5A @ 123.4v AC = 925.5W
Total = 1839.40W AC
3500% overunity on raw design!
51.48W DC IN to PMDC Motor > 1839.40W PMAC Generator
= 35 x more energy out than in!
-----------------------------------------------------------
Load on the capacitors
1.Tile-saw dryload 120v @ 4.6A = 550W
2.200w lamp
3.100w lamp
4.100W lamp
5.Saw using 115v @ 4A dryload = 460W
Total load from capacitors = 1310W
1-6-2015
https://www.youtube.com/watch?v=CrUEjcWGpxw
We did another running test outside in the light.
We know the importance of running tests by an independent test lab and are at the moment in agreements with one.
I am not fully known about the inner workings of the device but all used components are shared in detail on the Unity Corporation facebook site as this is a crowdfunded funded project.
https://www.facebook.com/UNITYsystems?fref=ts
Theory behind The Unity Generator.
Karl Palsness' Theory
From a interview with Karl Palsness, who is an expert on Tesla technology.
He has also heard of several cases like this, all independent from one another.
"I know exactly what you're talking about. I've done a lot of work in that area. That's amazing. I've heard this from so many people now, that this works.
"From what has been observed, you're playing with the phasing angles between the motor and the generator, and when the phasing angles are out of phase, you're getting into what is called 'power factor'. When you get the power factor right, the current and voltage are out of phase, and when you get them meshed up enough, it actually self-runs and produces excess energy.
"This theory is based on magnetic flux. Permanent magnets or electromagnets such as in a generator or a motor, under certain conditions, give overunity (OU) behavior. But there's more to it than that, from what I've seen myself in overunity devices. It is all about geometry of the system. How and where a permanent magnet gets it's energy, is still a very big mystery to science. Excess energy can appear in electromagnets, as well.
"I've seen this effect on generators. When you have a generator that's turning too big of a load, and you have big enough breakers to handle the current, the currents go way up. Imagine if you have 500 Volts at 1 Amp; you have 500 Watts. Or you can have 500 Amps with one Volt; and you have 500 Watts. So when you get huge amps and low voltages in between the phasing angles, the current and magnetic fields are so collapsing and rising, and the phase angles are 'wrong', I believe that the magnetic field is coupling with, I'd have to say the word: 'The Vacuum'. In other words, it's coupling with an unknown -- whatever makes the permanent magnet work. We truly don't understand the science of that. There are a lot of theories, but no proof yet. Permanent magnets are still one of those unknowns, as to why it does what it does. And that's the same thing with electromagnets. There are a lot of unknowns.
"So when we kept playing with the power factors and phase angles, I believe there is overunity. I've seen it so many times now, with so many different people, that if I had the money, I would go out and buy the parts to do the testing in this area myself.
"Remember that guy [...confidential / U.S....]. He's doing the same thing. He has a small motor turning a big generator, and it's out of phase, and the power factor is out. There's a guy in South Africa that's doing the same thing. He's got a motor connected to a bigger generator, and it's doing the same thing. There's a guy in South America, (the blind guy from welding) (Force Multiplier System). He had a motor turning a generator, via shaky gear connection. That's doing the same thing.
"There are a lot of people claiming this. It's getting to the point that there are so many people claiming it, that are unrelated to one another, that I'd have to say that it holds a lot of potential.
"And I have a theory behind it. I actually wrote a whole chapter on that in my book about the science of how to do it in a much more elegant method than they are doing it now, based on what they are doing right now. The problem is, I don't have the funds to do it. That book is my research journal, and I don't have plans at the current time on publishing it – my notes as you work every day. I've got a lot of time and money into that. If what they are doing indeed works, I believe it can take it to the next level and make it a much better product and bring it to market. At the current time, I don't want to give that idea out, as it is still just an unproven theory of a way that might work. I'd like to bring it to fruition in the future if I can prove it works."
We would also like to introduce our Indian team, making great progress in India with their OZZOG gravity generator.
Contact details
Home
https://www.facebook.com/perpetualgravitylab?fref=ts
Presentation of OZZOG generator.
https://www.youtube.com/watch?v=Uw5qBslCftg
OzzoG lighting Ganesh Pandal.
https://www.youtube.com/watch?v=ThOYhZVr-wM
Comment