New permanent magnet motor video

[BroMikey]

Tri-Metatron Magnetic Engine

Jeremiah Sturk use Pyrolytic Graphite to shield his magnets


https://www.youtube.com/watch?v=6Lz09rqmP-0


Pyrolytic Graphite Sheets – Panasonic | DigiKey


Directory:Jeremiah Sturk's Magnet Motor - PESWiki

[Turion]

Contacted Mr. Sturk

I basically told him I could put him in front of some investors if he had a working prototype. This was his response.

I do have a small example of a device producing energy, it is like a battery
and a very simple demonstration. The full prototype that will produce 6KW @ 6Amps with regenerative capabilities requires several different metallic powders with a -Negative ion hemisphere ties to a +Positive ion hemisphere connected in series will produce clean, safe and lightning like energy. However this will require a 120 ton powder press and a magnetizer to produce. The materials needed are very expensive and I would need at least $1.5 Mil. I am willing to offer a percentage to an investor, but before I will do anything I need help on a different project.

You see I own 40 acres in Montana and I need about $150,000 to finish developing
The land. I want to help about 3-4 families have a place to live and also where we can
grow Organic, Non-GMO food. This property will remain off grid and would be a great
place to build a magnetic energy device! Here are a few links to this first project.
Here is my Intentional Communities Page:
Freedom Farm - Fellowship for Intentional Community …
Freedom Farm Link:
freedomfarms

[BroMikey]

Free Energy is here

Free energy motor using a magnet making light.

https://www.youtube.com/watch?v=tcfD6V7pQqc

[BroMikey]

Static motor/Gen

Free energy lighting simple and easy using only a coil and magnets plus a small cap. Enjoy

https://www.youtube.com/watch?v=89duz7xAifI

[BroMikey]

Motoring free

No battery no nothing just coils and a transistor. Motoring free.



https://www.youtube.com/watch?v=vOgp7Z8dOtw

[BroMikey]

Solid State Motor/Gen Coils

Magnet Motor/Generator.



https://www.youtube.com/watch?v=N1l3Fzp1rLw

[BroMikey]

Magnetic toroidal generator motor

I have searched 1000 times and 1000 times again and I always find new ones.


Top 3 energy from magnets? Donno?

https://www.youtube.com/watch?v=FgL4gWPY21U

[BroMikey]

Magnet motor

Magnet motor schooling for us side line pigeons


https://www.youtube.com/watch?v=etFCzIe-D2Y

[BroMikey]

Amigo Your Car is in

Here we have a free energy magnetic engine driven electric truck


https://www.youtube.com/watch?v=7jR4DvNO0jg#t=206

[BroMikey]

Amigo The Secret is In.

Here is the secret of a "Self Running Monople Magnetic Motor" courtesy of John Bedini's Howard Johnson video's "ENERGY FROM THE VACUUM"

I am not kidding either, this is the answer some of you have been looking for over the long long years.

Watch as the young man replicates.

With what you see from these replicators you and I can build a home generating system.

The magnets are cut and stacked, set on proper angles. Neo ,ceramic, rubber magnet arrays. One set of arced magnets.

In part 22 John Bedini is asked by the audience why his Ferris Where with 16 poles had convex (Curved inwardly) surfaces.

Here is part of your answer. Start spreading the word to your friends who have large multipole units only getting spikes

The secret is out of the bag.


https://www.youtube.com/watch?v=Kqsa2ZptudM

[Turion]

Not really

There is a magnetic gate at the beginning of this track that the car must be "FORCED" through before the magnets take hold and send it on its way. What is the amount of force required (over what length of time....the definition of WORK) to do this vs the work that is achieved at the exit of the gate at the other end? Perhaps before we claim this is the "answer we have all been looking for" we should do a little research and have an answer to that simple question. Hmmmm?

[BroMikey]

Sound good

There is a magnetic gate at the beginning of this track that the car must be "FORCED" through before the magnets take hold and send it on its way. What is the amount of force required (over what length of time....the definition of WORK) to do this vs the work that is achieved at the exit of the gate at the other end? Perhaps before we claim this is the "answer we have all been looking for" we should do a little research and have an answer to that simple question. Hmmmm?

Hey Turion

Yeah that sounds like a winner. Maybe it would be a good idea to let people know that this is the correct direction to go in. No one who is on the inside is permitted to proclaim what John Bedini has shown us in PART22.

I agree, we don't know everything about John Bedini's Ferris wheel improvement. We don't know the exact amounts of force and so forth.

We don't hear about anyone who has done what John Bedini has shown either.

However what we do know is this.

(1) Huge amounts of power pour off of John Bedini's Ferris wheel

(2) John HIMSELF stated that "It would run like that forever"

(3) That the people with Monopole's don't have this with the SSG

(4) John stated Howard Johnson's magnetic gates were the key.

(5) John's Ferris Wheel poles uses specially cut convex (curved in wardly) magnets.

Don't take my word for it Buy Part 22 and listen to John blowing in the wind I guess.

As far as me telling everyone everything there is to know INSIDE the mind of John Bedini, I can't You are the one to help me out?

Also if you look around at the Howard Gates replications you will see more clues. Not all setups were the same with Howard's work, he reminded me of how many variations I have seen of John's work.

These guys are baffling to follow with their endless possible combinations of how it might be made to achieve the same goal.

So yes you are right Turion, I have not made these gates work completely yet and I can't lead the group step by step to build John's Ferris wheel, all by myself.

But let me ask all of the people something.

Do you think John Bedini gave away the clues in 2010 just for kicks, or do you think John was not telling us right? Do you think John Bedini wants us to find the answers?

The man in the video is way ahead because he is following John's lead by building these gates.

John himself gave us the answer and no one can show a set of magnetic gates that flip poles and self run. Other magnet motors around the world self run but I am not looking at those.

I am looking at a Ferris wheel with 16 convex magnetic gates swinging around from floor to ceiling that pass 2 huge coils with no doubt the other half of the gates inside them.

I didn't say I had all the answers, but no one is putting 2 and 2 together anywhere on the web. What I am saying is I believe John Bedini WANTED us to find the answers from the clues he had already given up to that point in 2010 when John shamed the old leaders of the Monopole group from years ago.

I know the answer is there and that it isn't all that hard either.

John Bedini wants us to follow his lead and I don't see anyone giving it the time of day. Do you really think we are along on this forum?

If people knew what direction to go in, they would have a start. They don't.

The people are in confusion, they don't know that what I am saying is correct.

How many decades more should we wait?

I understand your point Turion, you don't want to say something works unless you have it working and I can respect that.

I am talking about the direction to go in for the young guys.

One of the biggest things that really qissed me off about Sterling years ago when he started, was the way he brought up John Bedini's bike wheel, showed it in 2 minutes, said it didn't work and quickly went to another gadget. I never watched him again, I always turned him off.

Are we any different?

We have the answer right under our noses, been told that the monopole has the answers and we are not sure what to do.

THAT is what I am saying. I am saying that this is the way to go. That is all.

Not that I have all of the intricate details.

We work on all these Bi-toroids and double coil this and a two coil that thinking that these coils are somehow different or better than the multi-pole SSG?

The way it looks to me is that John was phasing with the monopole like a BiTT does where reactive power sets things in motion and the multiple coils act similarly to some of these other projects were putter with all day.


I think the answer is staring us right in the face.

Your statement says that the gates have no Overunity potential and I just refuse to believe that.

Thank Turion for hearing me rant.

I will get to the bottom of all of this, trust me on that.

I am of the opinion that there is no better direction to go in than John Bedini's work is leading me.

I will have have a working set of gates.

MikeyHow-bout you?

[Turion]

Didn't say magnetic tracks had "no over-unity potential." All I said was we don't know if the input is greater than the output. And if it is, by HOW MUCH. I have built lots of these magnetic tracks. I built one with a four foot wheel as a rotor and a magnetic track as a stator that would have self run if I had the money for all the magnets required. But I didn't spend the money because I could see that the issue was the amount of POWER it put out. It could barely keep itself turning, so could do LITTLE if ANY work. The minute you added drag to it by trying to run magnets past coils, it would come to a halt. Like I have said before...getting COP>1 is easy, but it is NOT ENOUGH.

I believe what you had going on in the center of John's big wheel had more to do with the Radus Boots than with Howard Johnson's stuff. That's my guess anyway. When you can turn a magnet off and on like that, you have the potential to really produce some power....and far MORE power than the tiny bit you are going to get from the magnetic tracks. Just my thoughts, and I think the pursuit of the Radus boots technology is a far more worthwhile goal than the pursuit of magnetic tracks.

But each to his own. I have my own projects to completely test, and then I'll have some things to share. Or at least I hope I will. Test results have been good so far.

As to "huge amounts of power pouring off John's Ferris Wheel." Where do you get that from? Where do we see that? John's wheel produced power, but how much is "huge amounts" and where is the data to back that up? I was there. I saw it working. It was an awesome machine, but just how much power are you trying to tell us that machine produced? Facts man, facts!!

We are NEVER going to get where we need to be by trying to hype everybody up. We need to start with facts and data not beliefs and wishes. John's three books on the SSG are a great start. IF you understand that machine, and you understand switching, you are most of the way there. When you add running loads off the potential difference, you've reached the top of the mountain.

The Benitez patents (Tesla switch) work.
Running loads off potential differences works.
Coal collapse to generate energy works....the bigger the coil, the MORE energy you get.
We know LOTS of things that works and we just need to put them together.

When you can run a motor for FREE, what you get out of your generator is all COP>1

[BroMikey]

Not so

There is a magnetic gate at the beginning of this track that the car must be "FORCED" through before the magnets take hold and send it on its way.

@Turion

Look at the video. Howard is not pushing 14 pounds to get the car into the gates field here. The other video yes, but not this one.

Watch as Howard just lets it go and zero opposition til the car gets close and then the pull is 14 pounds.

Good point, that is a huge difference from other video's.

Nobody else other than John has even come close to this. I can't believe it


https://www.youtube.com/watch?v=ndRrCZiM1CU

[Stealth]

Turion is right. There are some things that need to be considered in this configuration. I have built and experimented with many such tracks in the TOMI configuration. If you run the cart (magnets) in this configuration you have a considerable amount of force to overcome before you can enter this gate. I have found that if I run it in the opposite configuration ( turn the magnetic cart around), that it will not only pull into the gate, but I can configure it to not pull back after it gets to the end of the track. In this way it is truly self running. No need to push it past the gates entrance. It will exit more slowly but the speed and power at which it runs has enough inertia to overcome most of the stick point, as most call it. By having the stator using less magnetic force (smaller magnets), on the end, it will lessen the magnetic pull back on the cart, etc. I don't use a cart, but a roll of magnets inside a 3/4'' pvc pipe . They roll down the track (runway), plywood with two sides preventing the roll form exiting over the sides. The roll must be about 1/2'' to 3/4'' smaller than the width of the track. Good Luck. stealth