Barbosa and Leal Devices - Info and Replication Details

[dragon]

The circuits I presented aren't tuned to any specific input frequency, they are driven by current and triggered by chaos. Any/all incoming signals producing a peak of .25 volts or higher will trigger the transistor base.

[JESUS PIŅA]

JESUS PIŅA, yes it has a low frequency pulse although on the scope it looks like white noise because of all the other frequencies moving through the ground. When lightning discharges somewhere on the globe it sends a ripple through the earth, like tossing a stone in the water. When you single pulse a tesla coil it rings at its natural frequency until the energy has dissipated. There are lightning discharges at any moment of any day somewhere on our world ringing the planet at its natural frequency.

Even though the ground is a good conductor at low frequencies there is a considerable amount of resistance. When we put ground rods in we want to offer these currents an easy path, they will follow the path of the least resistance, preferably through our circuits. Since the voltage is very low with currents that can be quite high at times we want to use heavy cable - very low resistance wire and space the grounds 30ft or more positioned magnetic north/south. The north rod should penetrate the earth much deeper than the south rod.

Once your grounds are in, use the simple detector I described. If the LED flashes then you have current flowing on the line. I posted a couple circuits sometime back in this thread that can function with this type of low voltage current. ( post#275 page10 )

you think of this diagram?

[dragon]

JESUS PIŅA, yes it has a low frequency pulse although on the scope it looks like white noise because of all the other frequencies moving through the ground. When lightning discharges somewhere on the globe it sends a ripple through the earth, like tossing a stone in the water. When you single pulse a tesla coil it rings at its natural frequency until the energy has dissipated. There are lightning discharges at any moment of any day somewhere on our world ringing the planet at its natural frequency.

Even though the ground is a good conductor at low frequencies there is a considerable amount of resistance. When we put ground rods in we want to offer these currents an easy path, they will follow the path of the least resistance, preferably through our circuits. Since the voltage is very low with currents that can be quite high at times we want to use heavy cable - very low resistance wire and space the grounds 30ft or more positioned magnetic north/south. The north rod should penetrate the earth much deeper than the south rod.

Once your grounds are in, use the simple detector I described. If the LED flashes then you have current flowing on the line. I posted a couple circuits sometime back in this thread that can function with this type of low voltage current. ( post#275 page10 )

[JESUS PIŅA]

Please do not change the goal.

Just got an oscilloscope.

Friend, thanks for your kindness, but let me answer the friend dragon because I am evaluating the answers. Please do not turn the lens.

[JESUS PIŅA]

Please do not change the goal.

Friend, thanks for your kindness, but let me answer the dragon friend because I am evaluating the answers. Please do not change the goal.

[djarno]

Telluric currents have frequencies? They are the same Schumann Resonance (7.8 Hz, 14.1 Hz, 20.3 Hz, 26.4 Hz, 32.4 Hz and etc.)?

Just got an oscilloscope.

[JESUS PIŅA]

resonance schuman

You don't need to convince me... I've been running loads from telluric currents. Great PDF by the way.

I started several years ago when I saw some interesting anomalies on my earth connections. I couldn't measure anything - at lease couldn't get any readings on any conventional meters. A lot of interesting things were showing up on the spectrum - mostly low frequency. It occurred to me that if there were any current flowing between the grounds then it could be detected with a simple coil and core. Sure enough... I've been building circuits that utilize and enhance it ever since.

I've seen readings as high as 55 amps on my lines but this is typically when there's a lot of electrical activity in the area... not the normal day to day occurrences. It varies from day/night, weather, and seasons.

I've used ground/antenna and ground/ground systems to extract energy for quite some time, combining a dual ground system with an antenna... well... words simply won't describe it.

Anyway, for those that would like to make up a quickie detector simply wind a 4" x 3/8" ferrite core with 26ga wire end to end. Connect an LED to the wire ends. One side of the LED connect one ground and tap the other side with the other ground... if it flashes you have current on the line.

fun stuff !

Telluric currents have frequencies? They are the same Schumann Resonance (7.8 Hz, 14.1 Hz, 20.3 Hz, 26.4 Hz, 32.4 Hz and etc.)?

[djarno]

Thanks for details. Have you ever seen these video (probably yes ):

https://www.youtube.com/watch?v=-LFmmyl1JmM
https://www.youtube.com/watch?v=UrxwgaPMXwI




Sorry, but you used an alternative circuit with a long coil over a PVC tube (reported in a previous picture); what did you try to do?

Saw them both.

Idk what I tried. Bi-filar winding on one. Other isn't. Dunno might load faster/more electrons but it didn't make an difference (unfortunately).

Also PVC has electromagnetic field blocking, should be acrylic but I don't have.
Gonna wind on iron pipe.

[wantomake]

We need more like you

You don't need to convince me... I've been running loads from telluric currents. Great PDF by the way.

I started several years ago when I saw some interesting anomalies on my earth connections. I couldn't measure anything - at lease couldn't get any readings on any conventional meters. A lot of interesting things were showing up on the spectrum - mostly low frequency. It occurred to me that if there were any current flowing between the grounds then it could be detected with a simple coil and core. Sure enough... I've been building circuits that utilize and enhance it ever since.

I've seen readings as high as 55 amps on my lines but this is typically when there's a lot of electrical activity in the area... not the normal day to day occurrences. It varies from day/night, weather, and seasons.

I've used ground/antenna and ground/ground systems to extract energy for quite some time, combining a dual ground system with an antenna... well... words simply won't describe it.

Anyway, for those that would like to make up a quickie detector simply wind a 4" x 3/8" ferrite core with 26ga wire end to end. Connect an LED to the wire ends. One side of the LED connect one ground and tap the other side with the other ground... if it flashes you have current on the line.

fun stuff !

Dragon,
This is what we need here. Good innovative, thought shocking, intelligent ideas!!

I want to read more about harvesting free energy from mother earth. Who cares about some theories, thoughts, facts, ideas someone post about and another disagrees with them.

Thank you Dragon, I joined the forum to learn how to help save our planet. I've been burying things to extract dc voltage for years. Here in SC telluric currents flow north and south. The geomagnetic materials are high also.

New members, this is the basic 101 to begin extracting energy from the ground. Place a galvanized nail south with a wire attached, place a copper pipe say 15 ft. (3 meters) away in the ground north with a wire attached. Don't drive them all the way into the ground, just 2 or 3 inches(5 to 7.5 centimeters) for testing.
Connect meter to the wire leads, leave one in place, then move the other one east then west until getting highest reading. Now according to your location, you may need to test east and west. Mine is true north and south. Yes get a compass first. Do this as far away as possible from any utility poles. Very important.

Be careful and learn to experiment with fun,
wantomake

[thecowweb]

Picture's here; http://www.energeticforum.com/278883-post840.html

The ground cable brown is power in (1 rod) while the green/yellow earth is power back (8 rods).
12 or 15MM copper 3M deep in ground. Top isn't covered with soil (yet?).

Other then that I don't know where and how the effect occurs since its on random.

Thanks for details. Have you ever seen these video (probably yes ):

https://www.youtube.com/watch?v=-LFmmyl1JmM
https://www.youtube.com/watch?v=UrxwgaPMXwI




Sorry, but you used an alternative circuit with a long coil over a PVC tube (reported in a previous picture); what did you try to do?

[djarno]

Sorry djarno which type of connections have you made? Can you explain us? I think it's very interesting what you've said but allow us to replicate and help you. Thanks

Picture's here; http://www.energeticforum.com/278883-post840.html

The ground cable brown is power in (1 rod) while the green/yellow earth is power back (8 rods).
12 or 15MM copper 3M deep in ground. Top isn't covered with soil (yet?).

Other then that I don't know where and how the effect occurs since its on random.

[thecowweb]

I wounded an bi filer Tesla coil. Need to test multiple setups.
Occurred I didn't wind it ccw.....

Potential means voltage ⚡. I referred to the fact I on couple, but complete random, occasions pulled amps without giving amps only potential.

Try reading the pdf of Vladimir utkin or whatever it's named.
http://www.free-energy-info.tuks.nl/VladimirUtkin.pdf
404 Not Found


Also my conclusion is that the toroid only activates the Electron loading through the ground BUT it's useless as it isn't holding the potential, voltage, and as someone mentioned before more rods is an monkey 🙈 job. Since I've seen the effect of pulling raw amperes from the ground I'm definitely not gonna hammer 🔨 more rods. While holding 228 voltage ofcourse.

It is definitely overunity but for me not yet controllable and seems ****ing random. Ugh

Sorry djarno which type of connections have you made? Can you explain us? I think it's very interesting what you've said but allow us to replicate and help you. Thanks

[BroMikey]

You don't need to convince me... I've been running loads from telluric currents. Great PDF by the way.

I started several years ago when I saw some interesting anomalies on my earth connections. I couldn't measure anything - at lease couldn't get any readings on any conventional meters.



I've been building circuits that utilize and enhance it ever since.

I've seen readings as high as 55 amps on my lines



well... words simply won't describe it.

Wow Wee-HE HE HEHE.......

I am sorry people I can't hold it anymore.

[dragon]

You don't need to convince me... I've been running loads from telluric currents. Great PDF by the way.

I started several years ago when I saw some interesting anomalies on my earth connections. I couldn't measure anything - at lease couldn't get any readings on any conventional meters. A lot of interesting things were showing up on the spectrum - mostly low frequency. It occurred to me that if there were any current flowing between the grounds then it could be detected with a simple coil and core. Sure enough... I've been building circuits that utilize and enhance it ever since.

I've seen readings as high as 55 amps on my lines but this is typically when there's a lot of electrical activity in the area... not the normal day to day occurrences. It varies from day/night, weather, and seasons.

I've used ground/antenna and ground/ground systems to extract energy for quite some time, combining a dual ground system with an antenna... well... words simply won't describe it.

Anyway, for those that would like to make up a quickie detector simply wind a 4" x 3/8" ferrite core with 26ga wire end to end. Connect an LED to the wire ends. One side of the LED connect one ground and tap the other side with the other ground... if it flashes you have current on the line.

fun stuff !

[JESUS PIŅA]

I'm seeing a lot of distraction that leads us to lose time

I'm seeing a lot of distraction that leads to waste time and not solve what we really want, which is nothing more than have the real scheme of free energy generator, with very clear details of its parts. It seems that there are people here posing as intellectuals and actually has only intended to distract us and make us lose time. That is why I urge you to be careful with people with this behavior.