Pulse Motor

[citfta]

Thank you!

Thank you Vidbid!

You have just proven my opinion that you are a complete idiot.

Bye.

[vidbid]

Thank you Vidbid!

You have just proven my opinion that you are a complete idiot.

Bye.

Is that the best that you can come back at me with?

How weak.

Well, if you don't want to stick around and sling it out, I can't say I blame you.

[Turion]

Lol

Carroll,
Now you know what it's like trying to teach pigs to fly!!

[vidbid]

Carroll,
Now you know what it's like trying to teach pigs to fly!!

But you're the one that did learn to fly. :

[Turion]

RI DID learn to fly. Got my fixed wing when I was 18. Don't fly anymore, but could if I wanted to. I get my hours in every year. How did you know?

Oh wait, you didn't know. You were trying to be clever. But not clever enough apparently.

I kinda looked to see how many threads you had started here on the forum. As far as I can tell, it's over 20. Wow! That's a lot! I assumed you must have all kinds of builds to share with us. But as far as I can tell , not a single device you have created on your own. Not an original idea to be found that you had enough faith in to put the time in to build. What's wrong? Not enough faith in your own ideas to put your money where your mouth is? Or maybe you just don't HAVE an original idea that's worth a crap. And I couldn't find a single replication either. Not a one. Now, I will be the first to admit that I could be wrong. I did a LOT of skimming because, frankly, by the time I had trudged through the first few threads of repost after repost of someone else's ideas, I was pretty sure I was searching for something I was never going to find. So please, if you have actually ever built anything, whether original idea or replication, please direct me to that post. I would be proven completely wrong and you can ride off into the sunset victorious. Patiently waiting.

[vidbid]

RI DID learn to fly. Got my fixed wing when I was 18. Don't fly anymore, but could if I wanted to. I get my hours in every year. How did you know?

Oh wait, you didn't know. You were trying to be clever. But not clever enough apparently.

I kinda looked to see how many threads you had started here on the forum. As far as I can tell, it's over 20. Wow! That's a lot! I assumed you must have all kinds of builds to share with us. But as far as I can tell , not a single device you have created on your own. Not an original idea to be found that you had enough faith in to put the time in to build. What's wrong? Not enough faith in your own ideas to put your money where your mouth is? Or maybe you just don't HAVE an original idea that's worth a crap. And I couldn't find a single replication either. Not a one. Now, I will be the first to admit that I could be wrong. I did a LOT of skimming because, frankly, by the time I had trudged through the first few threads of repost after repost of someone else's ideas, I was pretty sure I was searching for something I was never going to find. So please, if you have actually ever built anything, whether original idea or replication, please direct me to that post. I would be proven completely wrong and you can ride off into the sunset victorious. Patiently waiting.

I'm sorry. I didn't mean to upset you. I was just jousting.

[Berg]

Is this the Heretical Builders Forum?

Because if it isn't, then there shouldn't be any original idea or device building prerequisite for being permitted to post to this forum.

I recognize that there are builders and there are experimental theorists. Both are needed.

I also recognize that there are reporters, individuals who bring other peoples' new ideas and perspectives to the group. This is a valuable service.

Spending time and energy criticizing people for not doing what you might do is an unworthy pursuit, especially when there is no requirement for them to do so.

Now I can step down from my soap box.

[Matthew Jones]

You forgot the other kind of person, the "Pacifist". This kind of person will just lay down and let people lie or get fact so wrong, or mislead whether intentional or with purpose. "Just so we all get along"

Bull$hit!!!

This man had his fact backwards and had he built anything along the lines of what he posting on he would have known the difference. His own words..

You know, Matthew, this disagreement is over eight posts I deleted. Initially, my intent was not to make you look bad. I felt that you took a dump on my thread, so that's why I deleted my posts. I didn't like you messing with my creation. I was developing an idea. It was the idea of somehow combining regenerative acceleration with a Bedini-Adams Rotary Charger in this video CRAZY bedini adams magnetic pulse motor generator !!! Fast !!! - YouTube but the magnets wouldn't work because they are mono-pole in Bedini and alternating in the Heins setup. However, the image in my first post for this updated thread might work for both systems. By the way, I saved a copy of that thread for myself. One day, I might re-share it.

And in his delusions caused by his neurotic personalty disorder, me, correcting him on the difference of the 2 devices was equated with "DUMP on HIS thread.". I was "Messing with his creation" a thread full of you tube videos, drawings and nothing else. But he doesn't see it that way, he believes he is building something even though he never presented a concept.

So you BERG can pacify this behavior until your blue in the face but me I will confront it. I have no sympathy for neurotics who believe so far outside of reality that they can get away with anything, act any kind of way without interference, and tell anybody anything. And any man who does is a just another pacifist.

Matt

[wayne.ct]

If wishes were horses

Hey, I looked at that image in the first post. And, yeah, it looks somewhat like a Bedini SSG. But something struck me as wrong. This is not really a Bedini SSG. At least that is the way it looks to me. First off, the magnets alternate N-S-N-S, and in the Bedini they all face the same way. Second, the Bedini has only two winding, and this one has three.

I only read the thread one time, but Vidbid never calls this a Bedini, only Matt calls it a Bedini. It seems to me that Matt needs to explain why he says it is a Bedini. If I am wrong, please attack me. Otherwise, get off the spot and come back down to earth. I like what you have said in other posts, Matt, but in this thread you have let Vidbid rob you of your sanity.

(In the Jeff Williams Bedini build all the magnets are oriented with North facing out, away from the axle of the rotor.)

[Matthew Jones]

Hey, I looked at that image in the first post. And, yeah, it looks somewhat like a Bedini SSG. But something struck me as wrong. This is not really a Bedini SSG. At least that is the way it looks to me. First off, the magnets alternate N-S-N-S, and in the Bedini they all face the same way. Second, the Bedini has only two winding, and this one has three.

I only read the thread one time, but Vidbid never calls this a Bedini, only Matt calls it a Bedini. It seems to me that Matt needs to explain why he says it is a Bedini. If I am wrong, please attack me. Otherwise, get off the spot and come back down to earth. I like what you have said in other posts, Matt, but in this thread you have let Vidbid rob you of your sanity.

(In the Jeff Williams Bedini build all the magnets are oriented with North facing out, away from the axle of the rotor.)

The thread, this thread, has been changed completely. it started out with this video originally:
http://www.energeticforum.com/redire...%3DecOjxyaa4e0
And later went on with some drawing and video of Bedini stuff. I made a comment on the fact he didn't know the difference and why the motor he was showing in the video was so fast. He ignored it for few days and came back and completely rearranged the thread to make me look bad, OR cover his butt because that s the only thing he can do, he doesn't know any better.
Later because of typo or two he went to show his true colors and rant about other races.

I am completely grounded him on the other hand has some neurosis going on.

Thanks for your concern.

Matt

Heres the quete again in which he admits it. You'll find it up hire on the page if he doesn't change it.

You know, Matthew, this disagreement is over eight posts I deleted. Initially, my intent was not to make you look bad. I felt that you took a dump on my thread, so that's why I deleted my posts. I didn't like you messing with my creation. I was developing an idea. It was the idea of somehow combining regenerative acceleration with a Bedini-Adams Rotary Charger in this video CRAZY bedini adams magnetic pulse motor generator !!! Fast !!! - YouTube but the magnets wouldn't work because they are mono-pole in Bedini and alternating in the Heins setup. However, the image in my first post for this updated thread might work for both systems. By the way, I saved a copy of that thread for myself. One day, I might re-share it.

[vidbid]

The thread, this thread, has been changed completely. it started out with this video originally:
http://www.energeticforum.com/redire...%3DecOjxyaa4e0
And later went on with some drawing and video of Bedini stuff. I made a comment on the fact he didn't know the difference and why the motor he was showing in the video was so fast. He ignored it for few days and came back and completely rearranged the thread to make me look bad, OR cover his butt because that s the only thing he can do, he doesn't know any better.
Later because of typo or two he went to show his true colors and rant about other races.

I am completely grounded him on the other hand has some neurosis going on.

Thanks for your concern.

Matt

Heres the quete again in which he admits it. You'll find it up hire on the page if he doesn't change it.

Matthew. You couldn't be more off base. Actually, that's not the exact video that I originally posted. I should know as I saved the thread, but you are close. Initially, I hadn't even bothered to read your post because I wasn't interested in what you had to say. Despite whether you like it or not, I'm going to continue to post how I like, and if I choose to delete a post of mine, I'm going to do it. By the way, those weren't typos that you made. You made definite number of mistakes in diction and grammar, the kind of mistakes that a non-native English speaker would make. I'm still convinced you're a foreigner because you speak like one. You're not going to silence me or anybody else here because that cat is out of the bag as to how you operate. You might believe that you can silence dissenters, but you couldn't be more wrong. You might think you can go around and try to bully people who disagree with you, but you're in for an rude awakening because I'm always ready to counter you.

[Matthew Jones]

Matthew. You couldn't be more off base. Actually, that's not the exact video that I originally posted. I should know as I saved the thread, but you are close. Initially, I hadn't even bothered to read your post because I wasn't interested in what you had to say. Despite whether you like it or not, I'm going to continue to post how I like, and if I choose to delete a post of mine, I'm going to do it. By the way, those weren't typos that you made. You made definite number of mistakes in diction and grammar, the kind of mistakes that a non-native English speaker would make. I'm still convinced you're a foreigner because you speak like one. You're not going to silence me or anybody else here because that cat is out of the bag as to how you operate. You might believe that you can silence deserters, but you couldn't be more wrong. You might think you can go around and try to bully people who disagree with you, but you're in for an rude awakening because I'm always ready to counter you.

But I never bullied you. I only pointed out you were wrong. And that was too much for you to handle. Hence your behavior since. I know you have to get the last word in so go ahead. Everyones looking at ya. Give them a show.

Matt

Matt

[vidbid]

Actually, anybody can go to the very first post of this thread and see the content of the original post:

[VIDEO]https://www.youtube.com/watch?v=xIDDSRJ_w8M[/VIDEO]

Pulse Motor_Basic setup - Almost zero B-emf with hyperdrive speed... - YouTube

https://www.youtube.com/watch?v=xIDDSRJ_w8M

Interesting pulse motor video.

- I'm in the process of looking for a schematic and a diagram.

It's not that big of a deal.

[vidbid]

But I never bullied you. I only pointed out you were wrong. And that was too much for you to handle. Hence your behavior since. I know you have to get the last word in so go ahead. Everyones looking at ya. Give them a show.

Matt

Matt

Matthew. Maybe you didn't mean to bully me, but if I felt like you were bullying me, and if I was too proud to admit it at first, that wouldn't be a first. As for anybody looking at me and judging me, I couldn't care less. I'm going to say what I want when I want. No one is going to silence me on this forum (with the exception of the moderator or administrator of this forum.). Now maybe what I say isn't the most intelligent thing to say at the moment, but so what, I make mistakes and so does everybody else. Heck, all I wanted to do is post about the rotary motor and how it could be integrated with regenerative acceleration technology. I don't care about p*ssing contests, and I don't care what anybody else thinks.

[citfta]

By the way, those weren't typos that you made. You made definite number of mistakes in diction and grammar, the kind of mistakes that a non-native English speaker would make. I'm still convinced you're a foreigner because you speak like one.

I think it is now clear who the foreigner really is. Only a foreigner would not realize the US is so big we don't all speak the same way. The people from the northeast don't speak the same way the people in the southeast speak. The people from Texas don't sound like someone from California. To try and claim someone is a foreigner based on something they posted is totally ignorant. If you had ever spoken with Matt you would have no doubts he is an American.