Tweet
Greetings to all builders and seekers of energy efficiency.
I want to start by thanking those who contribute their ideas, proposals, and prototype research to improve energy efficiency.
Reporting the progress of Mr. Dave's generator proposal, I finished making another 12-wire coil, made improvement in the connections, since the one that I built previously the connection wire turned out to be somewhat delicate, and improve the type of wire for make connections.
With the pair of coils already installed in the generator, I began to do the tests, everything was fine, I increased the revolutions to more than 3000 rpm, and unfortunately an accident occurred, one of the cores was detached, attracted by the magnets, and the machine collapsed, it came out. triggered a magnet.
The magnet fired at high speed hit my body, the part of my chest, the impact was tremendous on the right side of the sternum, which left me breathless for a great moment, I could not breathe, an intense pain in my body, fortunately I was able to breathe, and I got ready to rest and evaluate the damage I had suffered, if it was a careful injury, I took care of myself and rested.
I'm fine, but I wonder if the magnet would have hit another part of my body, in more vulnerable areas, it would have been fatal.
At the time of the accident while I was in a state of shock, deep down inside I feared the worst, and anything serious or disabled, one thinks of his family.
What I comment, I take the opportunity to suggest that when working with motors or rotors at high speed or high speed, be very careful, put shields or protective armor, do not trust, as happened to me.
In Mr. Dave's comments, he informs us of the great speeds at which some of his assistants are working, it is true they have their prototypes well built, but they do not skimp on safety, on protection, on containment frames, all machine or engine due to your work has wear or components loose, take your safety measures Mr. Dave, do not trust yourself, double your safety, do not strain your engines to the limits of risks.
Other things that I thought previously, said this prototype must be insulated, built with a security shell, and isolate it or put it in a safe place, since if it were to be operated at home, one must have security for the family and one same.
There are still things that can be improved, I also see that there is a lot of effort in the neutralizing magnets, improvements can be sought in putting shields on the magnets in the input part, and leaving the repulsion in the central part, which can be improved not so much I know, you have to experiment and see what is achieved.
Another way that I have evaluated in magnetic neutralization, is if we put an electromagnet in the stator and activate the electromagnet just when the magnets are aligned for repulsion, here we would have to assess how much energy is required to achieve only the necessary repulsion, how much Energy expenditure would have to be sacrificed, I don't know, it would have to be experienced. There are always ideas and proposals for improvements, but it takes time and resources, but there is always the drive to keep improving and experimenting.
I always thank Mr. Dave for his information and his experience, I wanted to take a replica of his project, as a way of recognizing his effort and dedication in perfecting it, for now I think I'll rest.
I wish you success Mr. Dave, that you complete your project, and that you present it at the conference, any progress you achieve is important, you have a proposal and a prototype, in the multi-wire coil there is an effect that allows us to generate energy without opposition to the inductor magnet, at a given rpm.
I hope they take my success to take extreme measures, do not trust themselves, secure their prototypes with extreme security measures.
Thank you Mr. Dave, for me it is an honor to continue and build your proposals, I will continue later, the replica I had was destroyed, it was to confirm concepts, but also to carry out other more, here we will be reviewing and studying, evaluating and later rebuild.
I want to start by thanking those who contribute their ideas, proposals, and prototype research to improve energy efficiency.
Reporting the progress of Mr. Dave's generator proposal, I finished making another 12-wire coil, made improvement in the connections, since the one that I built previously the connection wire turned out to be somewhat delicate, and improve the type of wire for make connections.
With the pair of coils already installed in the generator, I began to do the tests, everything was fine, I increased the revolutions to more than 3000 rpm, and unfortunately an accident occurred, one of the cores was detached, attracted by the magnets, and the machine collapsed, it came out. triggered a magnet.
The magnet fired at high speed hit my body, the part of my chest, the impact was tremendous on the right side of the sternum, which left me breathless for a great moment, I could not breathe, an intense pain in my body, fortunately I was able to breathe, and I got ready to rest and evaluate the damage I had suffered, if it was a careful injury, I took care of myself and rested.
I'm fine, but I wonder if the magnet would have hit another part of my body, in more vulnerable areas, it would have been fatal.
At the time of the accident while I was in a state of shock, deep down inside I feared the worst, and anything serious or disabled, one thinks of his family.
What I comment, I take the opportunity to suggest that when working with motors or rotors at high speed or high speed, be very careful, put shields or protective armor, do not trust, as happened to me.
In Mr. Dave's comments, he informs us of the great speeds at which some of his assistants are working, it is true they have their prototypes well built, but they do not skimp on safety, on protection, on containment frames, all machine or engine due to your work has wear or components loose, take your safety measures Mr. Dave, do not trust yourself, double your safety, do not strain your engines to the limits of risks.
Other things that I thought previously, said this prototype must be insulated, built with a security shell, and isolate it or put it in a safe place, since if it were to be operated at home, one must have security for the family and one same.
There are still things that can be improved, I also see that there is a lot of effort in the neutralizing magnets, improvements can be sought in putting shields on the magnets in the input part, and leaving the repulsion in the central part, which can be improved not so much I know, you have to experiment and see what is achieved.
Another way that I have evaluated in magnetic neutralization, is if we put an electromagnet in the stator and activate the electromagnet just when the magnets are aligned for repulsion, here we would have to assess how much energy is required to achieve only the necessary repulsion, how much Energy expenditure would have to be sacrificed, I don't know, it would have to be experienced. There are always ideas and proposals for improvements, but it takes time and resources, but there is always the drive to keep improving and experimenting.
I always thank Mr. Dave for his information and his experience, I wanted to take a replica of his project, as a way of recognizing his effort and dedication in perfecting it, for now I think I'll rest.
I wish you success Mr. Dave, that you complete your project, and that you present it at the conference, any progress you achieve is important, you have a proposal and a prototype, in the multi-wire coil there is an effect that allows us to generate energy without opposition to the inductor magnet, at a given rpm.
I hope they take my success to take extreme measures, do not trust themselves, secure their prototypes with extreme security measures.
Thank you Mr. Dave, for me it is an honor to continue and build your proposals, I will continue later, the replica I had was destroyed, it was to confirm concepts, but also to carry out other more, here we will be reviewing and studying, evaluating and later rebuild.
Heavy shielding. This is for a full grown youth and is fully shielded so bullets do not hit me or my son Jordan. I have been telling everyone to shield.
not
Comment