Radiant spike puts out more than current

[THEminoly]

Dude....you people can think what you want about me....I asked Allen to take his request offline so that I don't come across as the guy who hijacked your thread...This is your show...this is how the bull**** starts....if it makes you judgmental ****s feel better ask him to post the private message.

No worries of hijacking here it's all inline and I know you have much to add. I hold no ill-will honestly. No BS.

[erfinder]

No worries of hijacking here it's all inline and I know you have much to add. I hold no ill-will honestly. No BS.

I appreciate you the leg room, and I will hold you to the no ill-will, and No BS. Lots of hate thrown in my direction....my reaction may not be justified in the mind of many, but their opinions in this regard they can stuff themselves fat on.

I have a few view points which I could add to the discussion, and a few demonstrations which support such.

There are many out there who talk the talk. Of these only a few have anything to show for the talk, they have their reasons for not disclosing, I have mine, you have yours. Till those who have something to show are ready to put up, don't make demands of anyone else, nor judge what you don't get.

[Allen Burgess]

Backspike.

The backspike in my setup has only two places to go; The coil, the battery or both. Either way or the combination of the two has to conserve and recycle the flyback. The rotor flux has been shown to add to pulse coil efficiency too. I could feel the pulse coil begin to grow cold while it self motored at top speed.

[OrionLightShip]

Huge Statement

I could feel the pulse coil begin to grow cold while it self motored at top speed.

That is a HUGE statement Allen!

Do you have a twenty dollar laser pointer digital infrared thermometer?
Are you willing to show this on video? Not making demands, just very curious and would love to see something like that actually proved to be fact for a change. Nature abhors the vacuum of unproven statements and there have been a few of those on this forum.

That's something I would spend my time and money on to build.

[Allen Burgess]

Reed oscillator build.

That is a HUGE statement Allen!

Do you have a twenty dollar laser pointer digital infrared thermometer?
Are you willing to show this on video? Not making demands, just very curious and would love to see something like that actually proved to be fact for a change. Nature abhors the vacuum of unproven statements and there have been a few of those on this forum.

That's something I would spend my time and money on to build.

@OrionLightShip,

I'd be delighted to coach you through an "Oscillating Reed Switch" build. I'm currently retired in Costa Rica. I'll start a new thread for you if you're serious.

View post #731 on page 25 from Synchro, nearly 8 years ago:

http://www.energeticforum.com/john-b...ingless+bedini

Here's the circuit schematic below; Reed switch in series with a D.C. battery and pulse coil: The critical difference between the schematic and the actual design is; The Reed switch mounts directly onto the wires at the end of the power coil in the actual design. Oscillating the Reed contacts removes the upward limit to switch speed. The second limiting rotor speed factor is bearing friction: That involves the internal magnet tube, precision ceramic bearings; The costliest items in the build!

[OrionLightShip]

That's a very generous offer Alan and of course I am serious.
I have no problem throwing money at something that I am sure about.

I'll read and get caught up when possible...I'm still researching electrostatics which is my primary interest.

I have to be careful what I get into because apparently I can't hear the truth; I only hear what I want to because I want to believe so badly.

I'm afraid the diagnosis for my condition is f'ing idiot syndrome.
I think it's terminal too!



My wife and I have been researching Uruguay but I've had to move Mother into my home so I'm afraid I could be stuck here for some time.

[Turion]

Diseased

Orion,
We must have bumped into each other somewhere, because I think I caught the same disease! I had no idea it was so contagious!

[OrionLightShip]

Orion,
We must have bumped into each other somewhere, because I think I caught the same disease! I had no idea it was so contagious!

lmao

There's no cure but luckily it only sucks as much as you let it.....

[Allen Burgess]

New "Oscillating Reed Switch Pulse Motor".

That's a very generous offer Alan and of course I am serious.
I have no problem throwing money at something that I am sure about.

I'll read and get caught up when possible...I'm still researching electrostatics which is my primary interest.

I have to be careful what I get into because apparently I can't hear the truth; I only hear what I want to because I want to believe so badly.

I'm afraid the diagnosis for my condition is f'ing idiot syndrome.
I think it's terminal too!



My wife and I have been researching Uruguay but I've had to move Mother into my home so I'm afraid I could be stuck here for some time.

@OrionLightShip,

Alright, we're up and rolling with the new thread.

[THEminoly]

the gist of it

2 - 200mA pulses to turn a 13 foot 300lb wheel - come on, really!

I can’t remember which thread it was in, jouleringer earthbattery or ferriswheel, But John Bedini became very interested in what Lasersaber was doing to light a CFL or spin one of his rotors or something. If anyone remembers or can find the post – please let us know. Anyway, the main point is not anything special that was said, but the posting itself… the act of posting... the fact that he became interested. With everything else going on in all the different threads and this caught his eye at the same time he was posting some interesting things on the FerrisWheel Thread.

That’s when it clicked in my head. There is more than enough info and links in this thread alone to put it all together. The radus motor or the use of the name radus and talk of flipping magnets threw me off far too long…

It’s the holidays everyone – MAKE YOUR COILS SING! with purpose...

[erfinder]

2 - 200mA pulses to turn a 13 foot 300lb wheel - come on, really!

I can’t remember which thread it was in, jouleringer earthbattery or ferriswheel, But John Bedini became very interested in what Lasersaber was doing to light a CFL or spin one of his rotors or something. If anyone remembers or can find the post – please let us know. Anyway, the main point is not anything special that was said, but the posting itself… the act of posting... the fact that he became interested. With everything else going on in all the different threads and this caught his eye at the same time he was posting some interesting things on the FerrisWheel Thread.

That’s when it clicked in my head. There is more than enough info and links in this thread alone to put it all together. The radus motor or the use of the name radus and talk of flipping magnets threw me off far too long…

It’s the holidays everyone – MAKE YOUR COILS SING! with purpose...

You ever consider that maybe the statements made by both John Bedini and Tom Bearden regarding only "paying for switching" applies here? Is it possible that the "200mA (a few hundred was mentioned in the video snipit...) you refer to is the switching requirement....maybe? We have been provided with more than enough to see what is being suggested. Constructing something using this information is going to take a little more than a passive understanding.

As I see it, and I may be alone on this and I am fine with that, the energy for moving the wheel isn't coming from the supply. This was pointed out over the years over and over and over again in many different ways. Believe what you want, prove what you can.

You ever tried steering flux with singing coils....try it. You familiar with the magnetic gates? The real ones and not the ones the community dunce references. John Bedini is clever, he is, or I am making him out to be more than what he is. I'm good with either one, but prefer the former to the latter.

We got this mechanism that generates transients thrown at us. Methods for collecting it, yes, methods, and out of the two main ones, only one is considered. We have the monopole rotor and stator typologies. The only thing which seems interesting to the majority is that the coils are wound in the right direction, and the proper grade of ceramic magnet is used. We are oblivious as to what the geometry represents. When such comments are made and or suggested, specifically that we should take a closer look, the one making the statement is ridiculed. What do you people really want?

I suggest folk look at the info that they were given with fresh eyes, **** the tangents. Really look at what we were given, because there is more going on there than we can be told.

I remember John saying "you wont power your house with a roller skate", and yet that's all we see people building. I don't think we need a Ferris Wheel, the point of going that large if a point was needed is because one can build to any scale.

My advice, don't change the channel, look closer at the information. Yes, we have been looking at this same stuff for years, some longer than others. The time you have invested is your foundation, one only needs one new impression, one new piece of information, and with it, the present way of viewing the exact same information can change, profoundly.

This is about the spike right? What exactly is the spike? On my bench it is a potential which can overcome any impedance it encounters, useless if not paired with its opposite, current which can overcome any impedance it encounters.

No thanks....I'm not interested in lasersaber...nor any other who may have caught JB's attention. I want what John Bedini started us off with, I want what he referred to as a:

Free Energy Generator

We are closer than we think, but shouldn't deviate too far from the path....well...to each his own.....


Regards

[THEminoly]

You ever consider that maybe the statements made by both John Bedini and Tom Bearden regarding only "paying for switching" applies here? Is it possible that the "200mA (a few hundred was mentioned in the video snipit...) you refer to is the switching requirement....maybe? We have been provided with more than enough to see what is being suggested. Constructing something using this information is going to take a little more than a passive understanding.

As I see it, and I may be alone on this and I am fine with that, the energy for moving the wheel isn't coming from the supply. This was pointed out over the years over and over and over again in many different ways. Believe what you want, prove what you can.

You ever tried steering flux with singing coils....try it. You familiar with the magnetic gates? The real ones and not the ones the community dunce references. John Bedini is clever, he is, or I am making him out to be more than what he is. I'm good with either one, but prefer the former to the latter.

We got this mechanism that generates transients thrown at us. Methods for collecting it, yes, methods, and out of the two main ones, only one is considered. We have the monopole rotor and stator typologies. The only thing which seems interesting to the majority is that the coils are wound in the right direction, and the proper grade of ceramic magnet is used. We are oblivious as to what the geometry represents. When such comments are made and or suggested, specifically that we should take a closer look, the one making the statement is ridiculed. What do you people really want?

I suggest folk look at the info that they were given with fresh eyes, **** the tangents. Really look at what we were given, because there is more going on there than we can be told.

I remember John saying "you wont power your house with a roller skate", and yet that's all we see people building. I don't think we need a Ferris Wheel, the point of going that large if a point was needed is because one can build to any scale.

My advice, don't change the channel, look closer at the information. Yes, we have been looking at this same stuff for years, some longer than others. The time you have invested is your foundation, one only needs one new impression, one new piece of information, and with it, the present way of viewing the exact same information can change, profoundly.

This is about the spike right? What exactly is the spike? On my bench it is a potential which can overcome any impedance it encounters, useless if not paired with its opposite, current which can overcome any impedance it encounters.

No thanks....I'm not interested in lasersaber...nor any other who may have caught JB's attention. I want what John Bedini started us off with, I want what he referred to as a:

Free Energy Generator

We are closer than we think, but shouldn't deviate too far from the path....well...to each his own.....


Regards

Ditto!

[erfinder]

Ditto!

This can and will go way way way off topic quickly if you let it.....I can and will take it off topic if I am given enough room....

What do you want them to know about the spike? What can you tell them about the spike that you think they should know? I separate myself from you, and them because I have a different view than the one which has been presented thus far.


Regards

[THEminoly]

This can and will go way way way off topic quickly if you let it.....I can and will take it off topic if I am given enough room....

What do you want them to know about the spike? What can you tell them about the spike that you think they should know? I separate myself from you, and them because I have a different view than the one which has been presented thus far.


Regards

You're welcome to fly completely off the rails. To me it's all the same stuff. I do know we are vastly different in how we are making it happen and how we are applying it. I welcome your knowledge.
Kind regards - patrick

[THEminoly]

You're welcome to fly completely off the rails. To me it's all the same stuff. I do know we are vastly different in how we are making it happen and how we are applying it. I welcome your knowledge.
Kind regards - patrick

PS - I could be completely wrong about it being the same stuff. I might be making assumptions that are wrong. I still welcome the knowledge...