If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Fight the urge to limit my statement to the physical geometry, I don't, didn't. I am trying to establish coincidence between very specific events. I mentioned the specific events.
Watch the video again, sometimes you have to watch more than once as laymen don't articulate messages well, and generally have to repeat often. Thank my lucky starts for video.
Regards
Ok, understood. I only mentioned as it became important back when I was working on motor/generator concepts.
Yes, I need to watch and probably more than once.
Thanks
V
'Get it all on record now - get the films - get the witnesses -because somewhere down the road of history some bastard will get up and say that this never happened'
Allen
Observations are made and benchmarks established ,then perhaps a summary
Can be made so as to be of value to future researchers.(the time saving thing)
Luc has spent countless hours experimenting in this area
He Personally wound miles of wire onto all manner of cores at Ottawa university for Thane
Researching many different areas.
To be clear the experiments may seem old news to some however they are good for those unaware
Of what to expect on the bench , which is useful when hunting anomalies.
I personally value his contribution , and am quite currious to see his experiments
(As well as investigations of other paths being mentioned here.
Its all good
Respectfully
Chet
@Ramset,
Luc just off loaded another huge crap on the Energetic Forum group like Citfta.
Gotoluc's inviting everyone to join him on his Overunity thread where he has the power to personally delete your comments if he sees fit. He's no longer interested in commenting about the topic on the Energetic forum because he can't act like a Nazi dictator over here.
I was severly sanctioned off Gotoluc's "Moderated OU Thread" and can't even comment on any of the numerous, broadly audienced threads I initiated over the years due to his excessively strict standards! Luc recruited Citfta for first sergeant, and all she's done at OU is chronically defecate on the Energetic forum.
This is the third time Allen has made false claims against me on this forum. Sorry Dave for polluting your thread with this but I feel it needs to be said.
First as several of you know I am NOT a she. I am a guy who has retired from working in electronics for over 50 years.
Allen is claiming I have been saying a lot of bad things about this forum. I did say in a post a few months ago that I was going to spend most of my time with OU.com because I was tired of coming to this forum to only see reruns of fake YouTube videos. And I was tired of seeing serious researchers being blasted and called names and slandered because they asked for some evidence that claims made were real. I only said the same thing several of you have said. I am very glad to see some serious researchers back here again.
Allen is also claiming I had some kind of power to have him censured. I do not have that kind of power there. What really happened was the following: Allen (synchro1) was having difficulty understanding what happens when a coil discharges. After some discussion in one to the threads I offered to start a new thread to help Allen understand about the inductive kickback. Allen asked me to go ahead and do that.
After a few pages of discussion and after several scope shots showing the discharge action Allen took offense at what was posted because it did not agree with his idea about inductive kickback. At that point just like in this thread he started attacking people with name calling and cussing and slander. I asked him to knock it off and he proceeded to attack me also. At that point I said I was going to ask Stefan to lock the thread. Several people asked me to not do that as they were learning from our discussion. So I asked Stefan to not lock the thread.
As Allen continued his attacks one of the very senior members then asked Stefan to put Allen on moderated status. I didn't even know you could do that. Allen blames me and Luc for him being put on moderated status but in fact it was his own actions that did it. And to set the record straight a little more it was not Luc either that had him put on moderated status. I know this because of some PMs that were sent to me to tell me what was going on.
Allen, I am sorry you still seem to hold some kind of grudge against me. I was only trying to help you in your understanding of electronics. I hold you no ill will. In fact I pity you. Your behavior is more like a 10 year old than an adult. I sincerely hope you can learn to control your anger against those you don't agree with. We can respectfully agree to disagree without being disagreeable and disrespectful with one another.
Respectfully,
Carroll
Just because someone disagrees with you does NOT make them your enemy. We can disagree without attacking someone.
This is the third time Allen has made false claims against me on this forum. Sorry Dave for polluting your thread with this but I feel it needs to be said.
First as several of you know I am NOT a she. I am a guy who has retired from working in electronics for over 50 years.
Allen is claiming I have been saying a lot of bad things about this forum. I did say in a post a few months ago that I was going to spend most of my time with OU.com because I was tired of coming to this forum to only see reruns of fake YouTube videos. And I was tired of seeing serious researchers being blasted and called names and slandered because they asked for some evidence that claims made were real. I only said the same thing several of you have said. I am very glad to see some serious researchers back here again.
Allen is also claiming I had some kind of power to have him censured. I do not have that kind of power there. What really happened was the following: Allen (synchro1) was having difficulty understanding what happens when a coil discharges. After some discussion in one to the threads I offered to start a new thread to help Allen understand about the inductive kickback. Allen asked me to go ahead and do that.
After a few pages of discussion and after several scope shots showing the discharge action Allen took offense at what was posted because it did not agree with his idea about inductive kickback. At that point just like in this thread he started attacking people with name calling and cussing and slander. I asked him to knock it off and he proceeded to attack me also. At that point I said I was going to ask Stefan to lock the thread. Several people asked me to not do that as they were learning from our discussion. So I asked Stefan to not lock the thread.
As Allen continued his attacks one of the very senior members then asked Stefan to put Allen on moderated status. I didn't even know you could do that. Allen blames me and Luc for him being put on moderated status but in fact it was his own actions that did it. And to set the record straight a little more it was not Luc either that had him put on moderated status. I know this because of some PMs that were sent to me to tell me what was going on.
Allen, I am sorry you still seem to hold some kind of grudge against me. I was only trying to help you in your understanding of electronics. I hold you no ill will. In fact I pity you. Your behavior is more like a 10 year old than an adult. I sincerely hope you can learn to control your anger against those you don't agree with. We can respectfully agree to disagree without being disagreeable and disrespectful with one another.
Respectfully,
Carroll
Here's a copy off a PM from Carroll, (not to tough):
If your message was because you were put on moderated status you were put there because of a request be one of the other members of this forum. I only asked Stefan to put you on notice for your childish behavior. If you ever expect to get anywhere in this world you need to drop the 10 year old bully attitude. I spent almost a whole day answering your questions and making suggestions to help you understand about inductors. When you saw your ideas were incorrect you went on the attack with name calling and insults. You really need to grow up. I was sent a couple of PM's that told me this is your normal behavior. I am sorry to hear that. If you insist on attacking me after I only tried to help you then I WILL ask that you be banned from this site. I may be fairly new here as far as the number of posts but I have been around too long to put up with your kind of behavior.
Ok, there you just confirmed what Cifta was saying…and that he seems to be right. Grow up man, and stop taking up space with your crap.
Mario
I agree, your just proving the case against yourself. I for one have decided one more post an its the ignore list. I refuse to read anymore good or bad from a person with this behavior. And this thing that I just got done winding goes on the shelf no matter what. This does not benefit anyone it just takes away. Period...
Carroll is good person GotoLuc seems to be too, your just wrong in this.
Luc was asked to start a thread here on the Energetic Forum, but instead he's asking everyone to go over and use the Overunity site where he has dictatorial powers. He would have deleted all my worthwhile comments about the core dampener on his moderated thread. People have a right to be forewarned about Gotoluc's arbitrary and capricious bias.
No one is paying any attention to Gotoluc at Overunity anymore because he grew too bossy. That's why he's over here at Energetic Forum reaching for consideration.
You apparently went to lunch on the "Reed Oscillator" so you don't add up to a big loss for me anyhow. Take it and shove it!
I hope the rest of you follow the cue, Allen Burgess is no good and does not want to forward this discussion he just wants to cry about the problems he has himself created. Good luck to the rest of ya'll who put up with his BS.
Whats that Allen, I can't hear you your on my ignore list.
I hope the rest of you follow the cue, Allen Burgess is no good and does not want to forward this discussion he just wants to cry about the problems he has himself created. Good luck to the rest of ya'll who put up with his BS.
Whats that Allen, I can't hear you your on my ignore list.
Matt
This guy simply failed to follow instructions and wound up with a piece of crap. Now he's trying to cover his goof up with some razzmatazz!
Well
I am sorry but I have to post a little due to claims which I feel are unfounded.
Carroll is a Top shelf fellow and a great asset to this community.. in his short tenure at OU.com he has made excellent suggestions and contributions.
regarding Luc's waning popularity ??
I would suggest just the opposite ,he is being assisted by one of the sharper fellows in this community [Verpies] towards some very serious investigations
in the hunt for anomalous energy .
I expect to see some very intriguing experiments coming down the road ,
The team of itsu and verpies have just finished work on a beautiful piece of open source work for these endeavors .[crazy amount of time and testing involved in creating this]
see here post # 757 Sharing ideas on how to make a more efficent motor using Flyback (MODERATED)
Well
I am sorry but I have to post a little due to claims which I feel are unfounded.
Carroll is a Top shelf fellow and a great asset to this community.. in his short tenure at OU.com he has made excellent suggestions and contributions.
regarding Luc's waning popularity ??
I would suggest just the opposite ,he is being assisted by one of the sharper fellows in this community [Verpies] towards some very serious investigations
in the hunt for anomalous energy .
I expect to see some very intriguing experiments coming down the road ,
The team of itsu and verpies have just finished work on a beautiful piece of open source work for these endeavors .[crazy amount of time and testing involved in creating this]
see here post # 757 Sharing ideas on how to make a more efficent motor using Flyback (MODERATED)
@Ramset,
Your top shelf fellow's a "Snitch"! Verpies has Herpes.
Comment