ReGenX Coils and ReGenXtra switching

[Turion]

bi,
You call me “greedy” for not sharing what I know with you. How about you sign over your monthly income to the folks on the forum. When you do that and show us YOU’RE not greedy, we will see. If I was greedy I never would have shared the generator or the things I HAVE shared. I know you’ve gone through life being given everything you want, but some of us have had to work for a living and we believe people appreciate things more when they have had to work for them. I believe if people want something bad enough they will work for it. If they don’t, they get what they deserve. Just like YOU are getting the free energy device YOU deserve. LOL

[BroMikey]

What I like is how you can take this one principle using the multifilar coils and install as many as you can get on a rotor and have it all be extra joules with no drag on the rotor. Here is where we are, Changing magnet sizes, changing coil geometry such as windings having a greater length vs shorter, thickness of core for coil. Counter magnet tests are next. Coming soon.

[bistander]

... I know you’ve gone through life being given everything you want, ...

Practically everything that you "know" and post here is erroneous or a falsehood. Just like your statement quoted above. Or a while back when you told me that you knew more about the physics of motion than Issac Newton.

bi

[Turion]

I never said that. How about that paycheck? Put up or shut up.

[BroMikey]

I never said that. How about that paycheck? Put up or shut up.

NEWTON FRAUD
https://clmmag.theclm.org/home/artic...ysics-of-fraud

54b21b6e-f1b3-4c1b-9eb3-53bbd788ffd8_1.ab48073d0d4a0f88f26e08e501c0725f.jpg

[BroMikey]

Running and rerunning tests for conventional generating vs regenerative generating around 1-2 watts. One test drive input 23vac at 430ma gave and increase up to 480 ma doing a standard generating experiment. This increase measures 23v X .05 a = 1.15 watt of input power to get this measure on the output = 45vac at 24ma or 45v X .024 = 1.08 watts to reach the COP of these 2 figures we divide 1.08 / 1.15 = 93% efficiency

Using the generator same perimeter the drive input was the same which is known as operational charge by your power company. The same test is made using the regenerative effect and a slight increase of rpm (Very small) enough to know it was working. Drive reduction was 23vac as before dropping the amps down a tiny 40ma so calculations are as follows.

23v X .04a = -.92watt reduction with the output slightly increasing to 49vac at 27ma or we can say 49V X .027a = 1.32 Watts output continuing our calc's for COP = ? unknown or simplified might be simple addition or 1.08w+.92w / 1.15w = 2x / 1.15w = COP 173% efficiency.

[nutzNvoltz]

Note that you chopped my sentence in half for the quote. See the source for the whole thing.



This question, or statement, indicates that you believe that an electric motor can operate with only current going in to one terminal and nothing coming out of the other motor terminal, making the motor a one terminal device. Have you ever seen an electric motor function with only one wire connected to it? Ever see a light bulb light up and glow with only one wire, or connection? Any electrical device function with a single connection?

This indicates a lack of understanding by you of a most basic fundamental of electricity.

I apologise but I feel unable to teach or educate you in this necessary science. I strongly recommend that you take a class or course or program in fundamental electricity and learn basic concepts like what current and voltage are. Understanding circuits including Kirchhoff's circuit laws is essential.



This becomes clear when one understands electricity.



Please show me those circuits.

I'm glad to have you participate.

Regards,

bi

When one understands electricity? You think you understand every thing about "electricity"? Please enlighten us oh chosen one!

[Cadman]

Note that you chopped my sentence in half for the quote. See the source for the whole thing.



This question, or statement, indicates that you believe that an electric motor can operate with only current going in to one terminal and nothing coming out of the other motor terminal, making the motor a one terminal device. Have you ever seen an electric motor function with only one wire connected to it? Ever see a light bulb light up and glow with only one wire, or connection? Any electrical device function with a single connection?

This indicates a lack of understanding by you of a most basic fundamental of electricity.

I apologise but I feel unable to teach or educate you in this necessary science. I strongly recommend that you take a class or course or program in fundamental electricity and learn basic concepts like what current and voltage are. Understanding circuits including Kirchhoff's circuit laws is essential.



This becomes clear when one understands electricity.



Please show me those circuits.

I'm glad to have you participate.

Regards,

bi

Unbelievable. You insult me. Do you not even know what it means when a sentence begins with the word IF? Turion is right, you are nothing but a disrupter here.

[bistander]

To Cadman & nutzNvoltz,

I mean to insult nobody here. The only thing I wish to disrupt is the BS. I thought that anyone capable of communicating on this forum would have learned basic electricity in science class in grammar school. My mistake. I apologise again. Please take 10 or 15 minutes to watch this video which I located using Google search for "what is electricity". The need for 2 wires (circuits) is covered near time marker 9:00.

https://youtu.be/ru032Mfsfig

If, if you can grasp that information, can you see the absurdity of having all the electricity consumed in the motor with nothing coming out the other wire?

Regards,

bi

[bistander]

... How about that paycheck? Put up or shut up.

So now you can charge people money to use this forum and express themselves? Bully.

[BroMikey]

So now you can charge people money to use this forum and express themselves? Bully.

Yeah your paycheck must be juicy to spend 5+ years as a disruptor. Good luck with that. Don't tread on me sidewinder. I know some really old crusty dudes who can't walk well but they are computer genius. They don't have to be like you. Tick tock. Try harder, another spin job? WTH take another spin.

[BroMikey]

T

I mean to insult nobody here.Google search for "what is electricity". The need for 2 wires (circuits) is covered near time marker 9:00.

https://youtu.be/ru032Mfsfig

Regards,

bi

You need to start here, I had no idea you were needing material to study.
This is for BYE

da8f76402ec66c4aef7e8620505beb1536c0a7020ea2d79a25fb1a6e698de5d2.jpg

[bistander]

... Do you not even know what it means when a sentence begins with the word IF? ...

If I were to start a question to you with "if things fell up instead of downward", would you answer the question? Or might you tell me that would never happen (my premise is absurd) and suggest that I take a refresher course on gravity.

... If the entire amount of electrical energy was converted into mechanical energy, there would be nothing coming out on the negative terminal of your motor. 0 volts, 0 current. ...

bi

[Cadman]

Bi, your density is amazing, do you even think about what is written?

The premise that all those joules are converted is absurd, exactly my point.


I’m done here.

[bistander]

Bi, your density is amazing, do you even think about what is written?

The premise that all those joules are converted is absurd, exactly my point.


I’m done here.

Why didn't you say so? That is exactly why I did the detailed analysis of the motor-battery circuit. How many joules do you believe are converted? Show me your analysis instead of asking an absurd question.

Thank you.

bi