Figuera Device, Part G Continuum.( Serious Builders Only)

[Shadow119g]

?

What happened??
I slipped and fell on my shop floor, breaking my hip. Am mending slowly..
What happened to Marathon Man???
I need him back.
has anyone make this work:

Shadow 119g

[Cornboy 555]

[Cornboy 555]

Small Progress.

Hello All, have been extremely busy lately, only been working on this part time.

Some pics of my latest commutator, version 4 .

I couldn,t achieve proper contact between brush and comm face with a flat face comm, especially at high speed, centrifugal force always glued the brush to the holder.

I decided to use this force to advantage and build from scratch an internal commutator. Also with 96 bars i can connect every second winding of 2mm toroid winding, for smooth transition of wave.

Next is to build spindle for brush holder etc.







Regards Cornboy,

[Netica]

Hello Netica,

It was great when I saw your set up, plus the real way that Part G works...(OPEN, NOT CLOSED Windings)

I see Part G basically and simply as an "ELECTRICAL ATTENUATION" to the fluctuating Fields Switching Feed, making the rise and fall signal a bit smoother...that's all...Which was represented in the patent -as an Example- with resistors

Of course, Part G won't work with such heavy gauge plus such few turns...this way won't do ABSOLUTELY nothing but a mere "sophisticated" conductor, EVEN being OPEN. (I got tired of telling this fact to MM, SO many times!!...but he always got on the defensive side)

You are right, every Machine should be developed by EACH PART which is composed of...and not just dedicating that much "devotion" (which MM made as a "Cult") just to one single part.

I have developed a different concept about the way primaries and secondaries are disposed...including their cores.

I have developed a different driver method (mechanical rotary switch) Commutation System.

And so far, I am not including Part G on my setup...

N-N works good as Facing and sandwiched Coils-Cores...as Figuera patent shows...but we will NEVER get OU that way.

Will love to have you there when I start disclosing it!!


Regards


Ufopolitics

Hello Ufo,

I also found alot better results with the way I placed primaries and secondaries.
I got very much better results from alternate pulsing. Very high efficiencies incorporating both methods.

Would look forward to, and be interested in any advancements you have found.

[Ufopolitics]

Hello all,
As far as I see it through my tests part G did work to do the job that was invisioned quite well. Although not the way MM first sugested (in the wiring) as I reported quite awhile ago.
This really did give a new insight to the way this machine could operate so was good to persue.
However I was unable to get efficiencies needed, I am sure there is still more about the machine that is not known in its overall makeup.
I have not played around with it for quite some time now but still have ideas for more tests.
I think it will take quite a bit of work to understand this machine in full.

I was really gettin upset that MM never seemed to have a machine built and didn't appear to be testing anything and relaying any results. This is a big problem when you are supposed to be heading a build.
I also told him my feelings about this infamous Doug, and that How is he any different from anyone in the past suppressing information? if he understands this machine and doesn't relay the information some way. And thats a big IF he understands it. Proof is Proof there is nothing else with these machines and Doug type of tales.

Overall my testing to date the best efficiencies I found was pulsing the primaries (one on, the other off and so on) with norths facing each other.
I moved the secondary around and got really efficient results but no overunity. I did this just to try it out but don't consider it the true make up of the way this machine should operate.

The north to north primary set up works well in producing results in the secondarys.
The G core needs more work and understanding with what can be done.
The overall wiring may need more understanding aswell.
Anyway this is what I have found up to now.

Hello Netica,

It was great when I saw your set up, plus the real way that Part G works...(OPEN, NOT CLOSED Windings)

I see Part G basically and simply as an "ELECTRICAL ATTENUATION" to the fluctuating Fields Switching Feed, making the rise and fall signal a bit smoother...that's all...Which was represented in the patent -as an Example- with resistors

Of course, Part G won't work with such heavy gauge plus such few turns...this way won't do ABSOLUTELY nothing but a mere "sophisticated" conductor, EVEN being OPEN. (I got tired of telling this fact to MM, SO many times!!...but he always got on the defensive side)

You are right, every Machine should be developed by EACH PART which is composed of...and not just dedicating that much "devotion" (which MM made as a "Cult") just to one single part.

I have developed a different concept about the way primaries and secondaries are disposed...including their cores.

I have developed a different driver method (mechanical rotary switch) Commutation System.

And so far, I am not including Part G on my setup...

N-N works good as Facing and sandwiched Coils-Cores...as Figuera patent shows...but we will NEVER get OU that way.

Will love to have you there when I start disclosing it!!


Regards


Ufopolitics

[BroMikey]

He was very overt in the past about his slander against me and I still let him stay. But recently, when he started to go into other threads to harass people, including me, he crossed the line one to many times.

In the beginning I tore him a new one and then when nothing was done
right away I left it alone knowing he would hang himself to many times.
Sickening man

[Aaron]

posts complaint about being blocked

Hello Aaron,

Could there be He had issues on His Back-end?, it can happen, I mean, it has happened to me as well, where I make a post and it simply will not publish it, nor can it be previewed, Now, most of Us have the Pop Up Block plugins and -I know- they do interfere a lot with sites software response commands-requests...




Well, besides the "probable cause" I cited above, obviously you have sufficient reasons to ban him off this Forum.

I've tried to warn him before about his mouth...but he never listened.


Kind Regards


Ufopolitics

It's possible about problems on his end.

However, when he actually makes a post telling everyone he is "blocked after one post" - doesn't match up because if he was blocked, he couldn't post with a complaint about being blocked.

Even as moderator, I've posted things that didn't come up right - that was more with copy/paste where there is some glitch so I'm not immune to problems.

As you mention about what he has said in the past, I gave him way too many chances. Early on here, he was slandering me and I only left him in and didn't ban him because other were interested in what he had to say and I wanted everyone to have the opportunity to learn from him whatever he was sharing. He was very overt in the past about his slander against me and I still let him stay. But recently, when he started to go into other threads to harass people, including me, he crossed the line one to many times.

[Netica]

Hello all,
As far as I see it through my tests part G did work to do the job that was invisioned quite well. Although not the way MM first sugested (in the wiring) as I reported quite awhile ago.
This really did give a new insight to the way this machine could operate so was good to persue.
However I was unable to get efficiencies needed, I am sure there is still more about the machine that is not known in its overall makeup.
I have not played around with it for quite some time now but still have ideas for more tests.
I think it will take quite a bit of work to understand this machine in full.

I was really gettin upset that MM never seemed to have a machine built and didn't appear to be testing anything and relaying any results. This is a big problem when you are supposed to be heading a build.
I also told him my feelings about this infamous Doug, and that How is he any different from anyone in the past suppressing information? if he understands this machine and doesn't relay the information some way. And thats a big IF he understands it. Proof is Proof there is nothing else with these machines and Doug type of tales.

Overall my testing to date the best efficiencies I found was pulsing the primaries (one on, the other off and so on) with norths facing each other.
I moved the secondary around and got really efficient results but no overunity. I did this just to try it out but don't consider it the true make up of the way this machine should operate.

The north to north primary set up works well in producing results in the secondarys.
The G core needs more work and understanding with what can be done.
The overall wiring may need more understanding aswell.
Anyway this is what I have found up to now.

[citfta]

You got me! But I am a builder. Just not a builder of the infamous part G.

Carroll

[Ufopolitics]

There was a sticky which has since been removed where MM viciously attacked Aaron and what he was presenting. I don't remember the exact details but I did read the post. I was very surprised he wasn't banned then. He has also jumped into some other threads that were clearly not connected to the Figuera device and told the posters on their thread they didn't know what they were doing.

Carroll

CITFTA, WHY ARE YOU POSTING ON THIS THREAD?!


THIS THREAD IS STRICTLY FOR SERIOUS BUILDERS ONLY!!!


AS MM WROTE ON FIRST PAGE, ANY MEMBER WHO IS NOT BUILDING THE "GLORIOUS PART G" WOULD BE REPORTED TO ADMIN, THEN MEMBER WOULD BE BANNED, IF INSISTING ON POSTING HERE WITHOUT ANY REAL PROOF!!!


DIDN'T YOU NOTICE THAT EVEN MARATHONMAN HAS BEEN BANNED OUT OF HERE BECAUSE OF NOT BUILDING/DELIVERING ANY "PART G" FULL BUILDS?



































Just kidding Carroll...


Regards


Ufopolitics

[citfta]

There was a sticky which has since been removed where MM viciously attacked Aaron and what he was presenting. I don't remember the exact details but I did read the post. I was very surprised he wasn't banned then. He has also jumped into some other threads that were clearly not connected to the Figuera device and told the posters on their thread they didn't know what they were doing.

Carroll

[Ufopolitics]

Personally it grinds me to see MM smear Aaron and I don't know
how anyone could stand by and not be ticked off about it. Marmalade
should have been gone way back when he started his junk against
this site.

Hey Mikey,

And I personally do not recall, honestly, of any time where MM was addressing in any manner either Aaron nor this site, but then again, I did not "follow" MM everywhere he has posted on this whole forum.

MM is only copy and paste crazy, control freak nobody. You know that
UFO but you were hoping MM would deliver and never did.

The guy behind MM that could have "deliver" all of Us about this whole deal (or at least clarify a good part) would be Doug1...and so Doug hoped MM was going to be able to build the whole thing and so deliver it to Us...which never took place.

I personally never thought MM could be able to complete a full machine, and if by any of those things in life, plus the help from others here...He did...I do not think he will ever give it away just for free.

Now, on the "specific details"...A completely closed winding Part G Toroid, with the kind of copper gauge wire he was suggesting to all of Us here to build it with...would have NEVER, EVER DO absolutely anything else but SHORT OUT our Power Sources.

I tried in lots of private mails here to convince him not to do it that way...but he never listened...plus immediately adopted his "defensive then attack position"...until I decided to just quit here, as I will not be part of this failure... and so... got back to my own personal development.


End of story.


Ufopolitics

[BroMikey]

I've tried to warn him before about his mouth...but he never listened.


Kind Regards


Ufopolitics

Personally it grinds me to see MM smear Aaron and I don't know
how anyone could stand by and not be ticked off about it. Marmalade
should have been gone way back when he started his junk against
this site.

MM is only copy and paste crazy, control freak nobody. You know that
UFO but you were hoping MM would deliver and never did.

[Ufopolitics]

Another example - the entire time he could post and is acting like he couldn't. I can see when he posts and I can see when he deletes his own posts since I'm the moderator. He is misleading all of you to believe something was happening when it wasn't.

Hello Aaron,

Could there be He had issues on His Back-end?, it can happen, I mean, it has happened to me as well, where I make a post and it simply will not publish it, nor can it be previewed, Now, most of Us have the Pop Up Block plugins and -I know- they do interfere a lot with sites software response commands-requests...

I never banned him until today - before today, I don't follow this thread, nor do I care what he has to say so no reason for me to ban him based on something I'm not reading - not going to happen. He is gone now and it is because of his constant slander against me, lies, trolling, etc...

Well, besides the "probable cause" I cited above, obviously you have sufficient reasons to ban him off this Forum.

I've tried to warn him before about his mouth...but he never listened.


Kind Regards


Ufopolitics

[Cornboy 555]

He has always been able to post and is claiming that to make it look like he's being suppressed. He's played these games before. He is banned now because of his trolling in other threads, spreading disinformation and lies and now he is gone. He has slandered me too many times in this forum and I'm sick of his mouth.

OK, understand, and will keep working and post my progress here.

Regards Cornboy.