Multifilar Generator Coil - Lenz delay Experiments

[Matthew Jones]

Let me just give this thread a 1000 views by posting something, and this time I'll be useful.

@Bi
You do not have to use 3 wires that is just recipe that has worked for us. Its an electrical impedance to core mass ratio that makes it work. Get that wrong and your subject to Lenz Law. Too high of an impedance no power output, Less mass won't accelerate. You just gotta find that sweet spot.

@Turion and NROC

What the f*ck are you wasting your time with him for. Put him your ignore list along with the goof Bromikey. The only reason I know what he said was because I wasn't logged in when I was trying to figure out this very intellectual conversation. LOL .
These people have always been here they will always be here and that is why I am not.

My monthly contribution to traffic...
Matt

[bistander]

Not so nice

LOOOL Ohh great and mystical bistander the fact that you have said that 'you can see a few issues with my method' tells me straight away that you have no idea what you're talking about. I have told you how to get your own data I will never give my data over because i spent the time and money to get it. The next thing you'll be asking me to make an isolated datalogger for you to do it.


No one is going to tell why these things work because it costs loads of time and money to get those answers. I certainly didnt follow dave's word, I found the same things he did and that is why I support him one hundred percent. Your not interested in learning something you interested in bumping up your ego by quoting wikipedia.

Please oh great and mystical biproduct, tell me what issues there are with my method

You make it clear you don't intend to share, yet expect me to tell you something or share my knowledge and experience with you. The issue is obvious. You're so smart. You figure it out.

You have no comments on multifilar? Multifilar is this thread topic. Looks like you're here just to harass and ridicule me. Who's the troll?

... I will never give my data over because i spent the time and money to get it.

So your idea of forum participation is all take and no give. OK.

Regards,

bi

[NROC]

Baby bi

You make it clear you don't intend to share, yet expect me to tell you something or share my knowledge and experience with you. The issue is obvious. You're so smart. You figure it out.

You have no comments on multifilar? Multifilar is this thread topic. Looks like you're here just to harass and ridicule me. Who's the troll?


So your idea of forum participation is all take and no give. OK.

Regards,

bi

Biproduct, matts right. I know you'll miss me and i'll miss you baby but we have to say goodbye to eachother. Its not you, its me. I have paid the troll toll bi feeding you.

If anyone wants help with how to build circuits and microcontrollers etc for these kinds of projects then private message me. Biproduct i feel like if we talk we might rekindle an old flame so its best if we dont talk to each other but i will miss you from afar.

Sweet dreams my beautiful biproduct xxx

[bistander]

Battery

bi,
If you have to ask “Why bigger batteries?” After us spending ten years and dozens of posts telling you why, it shows how much attention you have paid. Bigger batteries = lower impedance to charging. If you really WANT to see positive results, you need the large batteries. The larger the better.

If you really want to play the “my battery is better than your battery game, I’m afraid you will lose big time. In the course of ten years I have ordered and tested most every kind of battery you could think of, trying to determine what battery gives me the most advantage with this system. But that’s MY information based on MY research. And I have spent thousands of dollars to find out. I’m not giving that away for free as results are worth a lot.

As for the coils. Yes, I have done those experiments. Not EXACTLY as I laid it out, but basically the same. I have seen that a trifilar coil with a total number of feet of wire will speed up under load at a specific RPM when a bifilar coil with the same total number of feet of wire will NOT. This tells me there is a difference in capacitance between the two coils that I can benefit from. Which is what Tesla said. I then went to SIX strands with the same total number of feet of wire and saw that it would speed up at a lower RPM. That YOU see no benefit in this is fine. I could care less.

Hi Turion,

Yes, I know you previously said to use bigger batteries because they have lower impedance. I just wanted you to say it again because much of what you said previously has disappeared. You use the 3 cell flooded batteries of around 200 Ah capacity, right? That PC925 battery which I used has a lower impedance than two of yours wired in series. That Odyssey battery is the most power dense lead acid battery on the market. It was the go-to battery for record setting electric drag racers until Lithium became available. What is the internal resistance or impedance of your battery? Oh wait. You won't give away your precious information. Well anyway, you can find the spec on the PC925.

So you say the trifilar wind has higher capacitance than the bifilar for the same number of turns (wire length)?

Regards,

bi

[BroMikey]

Maybe someone, me, will finally show a working unit. Promises never
kept is not a demo, almost and then excuses is not enough. There is
nothing wrong with asking for a working model.

This is SKY's thread wanting to see a working lenz free coils. Turion
has done that and so have I, the rest is chatter.

OMG I almost have it? I'll show it by the weekend for ten years of that?

Put up or shut up.

[Turion]

Response

bi,

Oh you are so clever. I fell right into your trap. So what happens now? Wait, I know. I have a working system and you don’t. All because you would rather argue and disrupt than actually learn anything. But that’s your choice. The thread is all yours. YOU show people how to build a working free energy device. Maybe they will listen. I have done all I am willing to do.

[bistander]

Delete protect

bi,

Oh you are so clever. I fell right into your trap. So what happens now? Wait, I know. I have a working system and you don’t. All because you would rather argue and disrupt than actually learn anything. But that’s your choice. The thread is all yours. YOU show people how to build a working free energy device. Maybe they will listen. I have done all I am willing to do.

I quote your post.

Sorry Sky. I tried to keep on topic. I do hope you continue. I'd really like to see tests and data.

Regards,

bi

[Quantum_well]

Blow your. Mind!

https://youtu.be/Oo0jm1PPRuo

When you consider the video there's obviously not
much scope for escaping the facts.

[BroMikey]

https://youtu.be/Oo0jm1PPRuo

When you consider the video there's obviously not
much scope for escaping the facts.

The same as this which I like better https://www.youtube.com/watch?v=cfpAWJR2u2c

[Quantum_well]

Coil winding.

Found this very informative,someone out there may find it useful.

https://en.m.wikipedia.org/wiki/Coil_winding_technology

[Turion]

Progress

Sky,
Did you give up on your replication and testing of the coil? That would be a shame

[SkyWatcher]

Hi all, Hi turion, no not really, just on hold for the moment.
Though the flywheel project I'm working on now will have some uses for testing that also.

For the moment, I'm building something more like bedinis, flywheel gravity field generator.

It can be easily adapted to test multifilar coils, in fact, I'll be using the large multifilar coil I was testing as a start to the bedini pulse motor circuitry to drive it.

peace love light

[Quantum_well]

Coils.

https://youtu.be/M22ZTUL3avk

Looks as if they make their coils with 13 strands.

[BroMikey]

https://youtu.be/M22ZTUL3avk

Looks as if they make their coils with 13 strands.

The motor shop told me that they use multiple strands per winding
on their 100hp motors and up. He uses 16awg 3 conductors as
needed but these are the same motors that eat energy the past
100 years. Pretty work but Tesla had better ones but Morgan
could not the same money with so the industry went with Tesla's
testing phase motors. All that you see come from N. Tesla.

The rest of N. Telsa's work is on display in our work but that makes
lectric free and we can't have tat now can we? Unless huge companies
can get filthy rich they are not interested in free energy, my goodness
that wouldn't make sense at all.

[BroMikey]

Found this very informative,someone out there may find it useful.

https://en.m.wikipedia.org/wiki/Coil_winding_technology

Here is the read you gave

Wild Windings in everything MASS PRODUCTION big money making
power eaters. Makin dat mula. Schools and industry so called
professionals talking out of both sides of their mouths at once.


Wild winding

Also known as jumble winding, with this type of winding structure
only poor fill factors can be achieved. The random wire placement
leads to a wider distribution of resulting wire length on the coil body
and consequently a wider range of electric coil resistances. Despite
its disadvantages, it is common in mass production. It is characterized
by low demands for machinery and operator and can be wound with
very high speeds. Wild windings are mostly applied in contactor- and
relay coils, small transformers, Ignition coils, small electrical motors,

Achieved fill factors with the use of round wires are about 73% to 80%