Davey's Water Heater

[Guest]

Hi, thanks for your great effort!

My next suggestion would be to use a spherical geometry, that means one central sphere or other geometry hammering away at resonant frequency, then use 2 outer spheres to create a resonance between those two. Probably that is what the other guys did with success. Plus they added an inductor and oscillating DC(?) I suspect.

But maybe we could use AC supply to tear the water molecules apart, the question is which frequency could be exact?? Maybe we need to go to 10 kHz just like in the other OU circuits.

[mikkyo]

I hope that this info will help others to find a different result to what I realized.

Is your mains power 50Hz?

[Doc]

Mains Hz

Is your mains power 50Hz?

Yes it is. For those with 60Hz mains all you do is use harmonics of 60Hz

[DavidE]

Jetijs

Using AC current will result in this kind of final condition (pic below).
As well as producing electrolytic gases in any kind of volume would
certainly end in a bang. My instinct suggests AC power is not part of this
process.



The WITS heater only utilized a 9v battery. And I don't remember seeing
a bell as part of the active mechanism. But there was a spherical
cavity formed by the vessel housing. Hmmm..

Mr. Davey suggested that he would NOT divulge key factors causing this
effect, and even hinted that he may employ counter measures so as to
protect the true secret.

I really have never understood this kind of mentality. The only way for new
world changing technologies to have a chance of seeing the light of day,
will be to introduce them on such a broad scale (i.e. www)... sheer
momentum and public opinion will demand further exploration and
utilization.

We love watching you work...

[Doc]

Missing the point

Unlike the WITS demo, the davey heater has and can be recreated easily. What he has not yet demonstrated is to heat a volume of water with an COP exceeding 1. All that has been seen is the surface area of water boil in a glass. Been there done that!!
It definitely is not DC current which will only create hydrolysis or HHO.

[Doc]

New angle

Hi don't have the equipment but if some can do the following test.
Instead of tuning the bell to the AC Hz, rather tune the AC Hz to a harmonic of the bell. This will provide 2 answers if it works. A) it is either the harmonic of the AC Hz that generates a sympathetic vibration to heat in excess of 1 or B) the gap distance between the spheres is creating extra energy caused by a dipole effect.

[wrtner]

Yes it is. For those with 60Hz mains all you do is use harmonics of 60Hz

I think you'll find you need octaves of 60hz, not harmonics.

i.e. if your mains runs at 50hz, both bells must be tuned to either
50Hz, or 100hz or 200 or 400 or 800Hz etc

If your mains is 60hz, you need
60hz, 120 or 240 or 480 or 960hz

It is important that the bells are in tune when they assembled.
The act of assembly can put them out.

Accuracy of tuning is everything.

Paul.

[George.ka]

witts

Does anybody have the plans for WITTS Ultrasonic water heater please...?

[wrtner]

Does anybody have the plans for WITTS Ultrasonic water heater please...?

Ask in the WITTS thread:
http://www.energeticforum.com/renewa...earch-etc.html

[ВлИг]

Нагреватель

Котлы и обогреватели по принципу Питера Дэви 1,8кВт - YouTube
Нагреватель из полусфер - YouTube
Нагреватель из полусфер: http://ledd.satom.ru/ - YouTube

[wrtner]

It is difficult to obtain the numbers from the video.
Please:
quantity of water
increase in temperature
time
voltage
amperes

thank you.

------------------------------------------------------------------
Трудно получить цифры с видео.
Пожалуйста:
Количество воды
повышение температуры
время
напряжение
ампер

спасибо.

[bbem]

Dumas

Guess this is also interesting for you replicators:
effet duma
The French build instructions:
http://leblogdejc.com/effetdumas/wp-...2014-04-07.pdf

and
"in france a con man Jean-Christophe Dumas is using the peter davey's device
to give lecture on free energy

sorry it is in french"

https://www.youtube.com/watch?v=UT36PaqqfTU

ps.
Thank you Tagor at OU for posting.
Please take note of the safety notices at the end of the video. Don't ever touch water or device when current is applied!
'This device has no brain, use your own!'
Do not build it if you are not an expert!

Bert

[ВлИг]

расчет

Примерный расчет:

удельная теплоёмкость воды - 4.183 кДж/(кг*К)
энергия, потраченная для нагрева 50 л. воды от +15 до +100 будет равна -
50 кг * 4.183 кДж/(кг*К) * 85 К ~ 17778 кДж
электроэнергия, затраченная на нагрев воды будет -
7 (А) * 220 (В) * 1800 (сек) = 2772000(Дж) = 2772 (кДж)
тогда КПД нагревателя - ( 17778 кДж / 2772кДж ) * 100 % ~ 640 %
Нагреватель Питера Дэви (Peter Davey). (Новая Зеландия), Нагреватель Питера Дэви

[wrtner]

.
....which, Google translated, becomes:

Sample calculation:

specific heat of water - 4.183 kJ / (kg * K)
energy spent to heat 50 liters. water from 15 to 100 will be equal to -
50 kg * 4.183 kJ / (kg * K) * 85 K ~ 17778 kJ
electricity consumed for water heating will be -
7 (A) * 220 (V) 1800 * (s) = 2772000 (J) = 2772 (kJ)
then the efficiency of the heater - (17778 kJ / 2772kDzh) * 100% ~ 640%

[wrtner]

Yes, for that run, COP = 6.4 !!!

Here is a spreadsheet:

http://www.tintabernacle.000a.biz/Davey.xls
.