Earth Battery SG

[juju]

earth battery

My earth battery results, this are all instant values with very small pieces used, if i let the materials rest in the earth, the voltage and amperage increase very fast, i found to, that as more deep in the earth, more power.

iron + copper = 0,8V 0,3mA

iron + ceramic material unknown = 1.04V 0.9mA

iron + other Unknown material = 0.73V 55uA (0,05mA)

copper + ceramic material unknown = 0,3V 0.2mA

other Unknown material + copper = 1.53V 0.7mA

and the winner is:

other Unknown material + ceramic material unknown = 1.8V 2mA

with none of this materials i had good results using me as a battery as with the "Unknown material".

[juju]

light detector

my goal is clear... i want to charge a cap during day, and discharge it during night.. instead of having a weak light all the time, we will have a super bright light during night, thats when we need it! in theory this should work, but it dont, someone can help or knows a circuit that will do the work?



EDIT: i made an error in the schematic... the colector goes to negative, and the LED goes from the cap positive, to the emiter, the output of the JT goes to the cap.

hugs

[Lidmotor]

Close to a Lasersaber/Stubblefield replication

@Jeanna & All
I am close to replicating Lasersaber's NS coil pulse motor and here is a video of it.

YouTube - Close to a Lasersaber--Stubblefield replication.ASF

I'm waiting on certain parts to do an complete replication but I am now confident that this is going to work for anyone who follows his directions.
I really don't know how we are going to pulse this thing in the ground to draw out energy -----but that is work for another day.

Cheers,

Lidmotor

[sigzidfit]

I can see this thing going viral.

[Bruce_TPU]

@Jeanna & All
I am close to replicating Lasersaber's NS coil pulse motor and here is a video of it.

YouTube - Close to a Lasersaber--Stubblefield replication.ASF

I'm waiting on certain parts to do an complete replication but I am now confident that this is going to work for anyone who follows his directions.
I really don't know how we are going to pulse this thing in the ground to draw out energy -----but that is work for another day.

Cheers,

Lidmotor

Hi Lidmotor,

I think that I have figured out the secret of the NS coil, last night, while watching video 5 of Lasersabers. And awoke early this morning, still thinking about it!!

When you have your coil working, please do the following to achieve a HV output.: INSTEAD of connecting your secondary to an LED, use it rather, to FEEDBACK into the primary, at the OPPOSITE leads from the make and break!! What this will do, is add the current from the secondary to the current in the primary, producing a LARGER reaction on the secondary and so on and so forth. You may want to use a capacitor to do this, perhaps a diode, etc. BUT there is no reason this should not work, that I can think of, and I can see the power being "magnified" many fold!!

A way would need to be found to then take power off, perhaps through this same capacitor?!?

FEEDBACK is the secret to NS amplification!

Cheers,

Bruce

[Iotayodi]

I really don't know how we are going to pulse this thing in the ground to draw out energy -----but that is work for another day.

The earth should be doing that. You could experiment with a frequency generator. Or a software generator with preferably a home stereo amplifier connected to it.

[Lidmotor]

Lasersaber / Stubblefield coil pulse motor --my replication

@All
Success!! I got my Lasersaber / Stubblefield pulse motor to run. The coil is not finished yet but it is still strong enough the spin a rotor on it's own with no external power. It is amazing to watch.
The key was the correct cotton covered copper wire that I finally got along with Lasersaber's detailed instructions (5 Youtube videos) on how to build the coil. I ordered the correct soft iron core but didn't get it yet so I tried a standard steel 1/2" bolt and it worked. This will probably work much better when the coil is finished and the right core is used.
Here is a video of it running:
YouTube - Lasersaber - Stubblefield coil replication---Success!!.ASF

@Iotayodi--- The way that this is going to work when this is burried in the ground will be interesting to observe. I have alot more research to do before I reach for a shovel and start digging a hole. I really just wanted to get to this stage first before I went any further. This was alot harder than it first appeared.

Lidmotor

[citfta]

Congratulations!!

Congratulations Lidmotor.




It is great to see someone have some success. Where did you find your cotton covered wire? I did a little looking one day on the net and did not find any in the U.S. I know someone ordered some from England I think because they had trouble finding it. Again congratulations and looking forward to your next steps of success.

Carroll

[Aaron]

pseudo closed loop

Hi Lidmotor,

I think that I have figured out the secret of the NS coil, last night, while watching video 5 of Lasersabers. And awoke early this morning, still thinking about it!!

When you have your coil working, please do the following to achieve a HV output.: INSTEAD of connecting your secondary to an LED, use it rather, to FEEDBACK into the primary, at the OPPOSITE leads from the make and break!! What this will do, is add the current from the secondary to the current in the primary, producing a LARGER reaction on the secondary and so on and so forth. You may want to use a capacitor to do this, perhaps a diode, etc. BUT there is no reason this should not work, that I can think of, and I can see the power being "magnified" many fold!!

A way would need to be found to then take power off, perhaps through this same capacitor?!?

FEEDBACK is the secret to NS amplification!

Cheers,

Bruce

If someone can post an updated simple schematic on this,
AS LONG AS THERE IS AN ISOLATED RECOVERY WINDING,
I'll show you how to properly feed it back to the front.

I mean a separate recovery winding and not just picking
spikes off the same winding when it collapses.

[Bruce_TPU]

If someone can post an updated simple schematic on this,
AS LONG AS THERE IS AN ISOLATED RECOVERY WINDING,
I'll show you how to properly feed it back to the front.

I mean a separate recovery winding and not just picking
spikes off the same winding when it collapses.

Thank you Aaron. Good to know someone is listening.

Cheers,

Bruce

[jeanna]

electro magnet

If someone can post an updated simple schematic on this,
AS LONG AS THERE IS AN ISOLATED RECOVERY WINDING,
I'll show you how to properly feed it back to the front.

I mean a separate recovery winding and not just picking
spikes off the same winding when it collapses.

Hi Aaron,
I guess Bruce would be the one to do that circuit since he knows what he is talking about.

As far as NS and the generator is concerned, it is a lot like the joule thief.
(I have said for a while that Nathan Stubblefield was the inventor of the joule thief)

It is 2 wires wound bifilar, but one is cu and the other is fe.

When the beginning of one wire is connected (and then disconnected) to the end of the other... so inside copper wire connected to outside iron wire, it is as NS called it an "electro magnet".

The patent office would not let him call it that so all he could talk about was the galvanic part which is weak.

I have the brochure and I will post the piece about the electro magnet.
BTW, The power is taken off the secondary.

jeanna

Anyway, If you picture a joule thief you might be able to describe the recovery Bruce is talking about?

(I could be not understanding what you and Bruce mean. If so, my apologies for stepping in here.)

[jeanna]

Hi Aaron,
I awoke this morning with this in my head.

Iota Yodi's circuit is not correct for this. The inside of one and the outside from the other must be connected. It is the original joule thief, I believe.

Bruce's circuit is what he was describing.
This is what lasersaber and lidmotor have made and what I am still working on... but getting there, soon - I promise.

This circuit is fiendishly clever and simple!

jeanna

[Iotayodi]

Iota Yodi's circuit is not correct for this

Really didnt draw a circuit. Just wanted to state what the patent says and how the wires are run in the coil. I should have marked the other primary leads but I thought that obvious. Terminals 5&6 tied according to the patent makes it a self sustaining electromagnet. But yes the feedback in Aarons circuit is from the + side of cap back to the + side of power source.

[jeanna]

... Terminals 5&6 tied according to the patent makes it a self sustaining electromagnet. ....

Here is the problem with attaching 5, 6 wires.

These are in the patent, yes.
Also in the patent is a lot of reference to this being a galvanic couple.

The problem NS had was that the Pat office would not grant him a patent for his real design which was an electro magnet.
In the BROCHURE, not the patent, he reveals that the inner of one wire and the outer of the other must be connected to produce the electro magnet (see pic. with notes in NS hand.)
The other ends of these wires MUST be left open (if briefly) to produce the galvanic reaction which is the electrical driving force of this design.

So, it is very helpful to always put this out together.
I did not understand it until I had made a dozen of each NS coils and joule thief circuits, but since I finally understand it, I want to help to not confuse others who may not have my experience with these.

I am waiting for the cores to arrive so I can get to this with enough turns to make it work.

ALL of my NS coils have totally magnetized cores. The bolts got magnetized over time and won't give it up.

jeanna

[jeanna]

Jeanna,

The diagram you show will work with the feedback circuit I show.

Thanks Aaron,
I was not even sure what that circuit meant, and I only wanted to post the circuit diagram of the stubblefield coil, since it has taken me the better part of 3 years to get it right.

I am not very good with diodes yet, and the recovery is something I do not follow.
I am still trying, though.

jeanna