7.83 - Earth Resonance, grounding [×], "Schumann Resonance." [TS, ESR+HSW, MAG]; anti-jetlag, anti-mind control, improved stress tolerance [SS]; psychic healing experiments [ESR]; pituitary stimulation to release growth hormone (helps develop muscle, recover from injuries, rejuvenation effects) [HSW]; Earth Resonance Frequency - 'leaves you feeling revitalized like you've spent a day in the country.' [PWM via DW]; reports of accelerated healing/enhanced learning - "the earth's natural brainwave" [MAG]
Announcement
Collapse
No announcement yet.
Earth Battery SG
Collapse
X
-
Thanks for this one Bod!
Originally posted by Bodkins View Post7.83 - Earth Resonance, grounding [×], "Schumann Resonance." [TS, ESR+HSW, MAG]; anti-jetlag, anti-mind control, improved stress tolerance [SS]; psychic healing experiments [ESR]; pituitary stimulation to release growth hormone (helps develop muscle, recover from injuries, rejuvenation effects) [HSW]; Earth Resonance Frequency - 'leaves you feeling revitalized like you've spent a day in the country.' [PWM via DW]; reports of accelerated healing/enhanced learning - "the earth's natural brainwave" [MAG]Watching television is like taking black spray paint to your third eye.Bill HicksLast edited by hh1341; 12-18-2008, 04:47 PM.
Comment
-
Thanks for noticing.
Bodkins,
Just so were clear about everything, thats not the tesla switch per se, what you're seeing on the cam is just a maker breaker and the batteries are three DEAD 6v lantern batteries.
Thanks to all for their efforts.
Stand by for homemade batteries, automatic battery switching and speed control.
Peace
PJLast edited by sigzidfit; 12-18-2008, 05:12 PM.A Phenomenon is anything which can be apprehended by the senses.
Comment
-
Earth Potential & Self Running Bedini Oscillator
Here are two vids I posted in the past but got yanked off youtube.
Here they are again:
YouTube - Earth Battery (rods)
YouTube - Self Running Bedini OscillatorSincerely,
Aaron Murakami
Books & Videos https://emediapress.com
Conference http://energyscienceconference.com
RPX & MWO http://vril.io
Comment
-
Originally posted by Aaron View PostHere are two vids I posted in the past but got yanked off youtube.
Here they are again:
YouTube - Earth Battery (rods)
YouTube - Self Running Bedini Oscillator
are you just using only one iron rod in the ground
outside as the power source or do you use the 2 rods ( copper and iron) ?
Or do you use any battery to power your Imhotop pulser
or is the Bedini circuit just powered by the about 0.8 Volts only ?
How long does the oscillator run on this ground rod(s) ?
Many thanks.
Regards, Stefan.
Comment
-
oscillator details
Hi, welcome Stefan,
I have 2 rods in the ground. A copper rod and a steel or aluminum rod. The wire going to the caps on the oscillator is only coming from the aluminum rod.
When I was running the Imhotep Oscillator just to charge the cap initially, it was running on a 6v/1.7ah gel cell battery and I have done it with a 12v/7ah gel cell battery. In either case, that was only to charge the cap with radiant. Once the cap was charged up a bit, I turned off the oscillator totally so there was no other input into the trifilar oscillator except the caps and ground wire. At 3:00 into the oscillator video, I turned off the Imhotep Oscillator so the trifilar oscillator (big coil with the rca 3055 transistor) was only running on the caps and ground wire.
The oscillator ran on the caps and ground wire for hours. The 33000 uf caps actually stayed around 0.630 volts. That is the voltage it dropped to when it level out I guess you could say.Sincerely,
Aaron Murakami
Books & Videos https://emediapress.com
Conference http://energyscienceconference.com
RPX & MWO http://vril.io
Comment
-
update
I have a fan using to sg setup with a diode to the charging battery postive,
Antena ----->diode----coil in the ground insulated in plastic and pot ash---->diode-----battery.
day two 1.2 volt
day three 2.2 volts
reading i disconnect the battery and read from antena to what was battery connection.
I think i have replaced the tiggercoil for the fan.
The negative emitter of the 2n3055 is to real ground.
Comment
-
Bodkins, are you saying you are charging with just the antenna, that's brilliant and perfect for emergency power. Well done man
If the power is just going to oscillate the SG fan? if so then i am sure you can at least put two batteries on there.
Comment
-
Bodkins Earth Battery
Hi All, Kingman has been away for awhile because of the holidays and other obligations. Anyway, great work Bodkins on attaching an antenna to your ground coil and getting the results that you are getting. It looks as if the system is growing in power or possibly responding to the fluctuations in the earth. I have come to a conclusion just as Nathan had mentioned that the energy that is in the Earth runs in waves or tides that are on their own time table. If you have been following this thread you know that I have an experiment setup in my Garage that has an LED attached to a battery and of course there is a bit more to it then that, but you can read back in this thread for a better explanation of my experimental setup. I have been logging the daily changes in the voltage along with temperature variations. I have been logging this into an Excel spreadsheet and will share that with you if you would like to see it?
Bodkins, have you considered logging the daily changes in voltage that we could possibly compare notes as to what we might see in a scalar wave that happens in the northern hemisphere of this planet we live on and possibly see some correlations from where you are and where I'm at. It would be so cool if we could see a wave or increase developing at the same time.
I'm of course in the northern hemisphere and it is darn cold here right now! It has not at all halted the scalar waves that continue to light my Garage LED in an ever changing voltage increase and decrease. Right now I'm in a lull of minimal changes but I'm sure the next wave or tide is just on the horizon of rolling through and energizing my setup as it has done so many times.
Bodkins let me know what you think and if you want I have a pre-made log sheet that you could use to log changes in Date, Time of Day, Voltage, and Temp.
Kingman
Do the thing and you will get the energy to do the thing.
Comment
-
Does anyone think that earth batteries would work with the joule thief circuit? I recently can remember seeing a 1.5v AA battery and a joule thief circuit light a 15 watt fluorescent bulb and two 90v neon bulbs. If someone got their earth battery to put out 2v at 50mA, this would be a perfect application.
(These are not mine, I found these on the internet and youtube and am using them as examples)
joule thief in action
YouTube - Super Joule Thief
fluorescent bulb AA
bulb AA.jpgLast edited by ApEkV2; 01-18-2009, 09:20 PM.http://www.youtube.com/user/lApEkv2l
If a connection cannot be established to the following link, it is because my server is either off or in Windows XP
Trying to understand the spark of plasma in water. Links - Pics - Vids
Comment
-
timing....i found the j thief about two weeks back and have been thinking the same. i notice lidmotor just posted a vid aswell on the j thief. timing..
i asked this guy to come and check out this thread, he's doing some fun stuff >> YouTube - kubikop's Channel
i can imagine a lamp that people could just push into the ground....don't know if it would work in dry countries though..
this is getting closer, yay, keep up the awesome work lads !
Comment
-
Electromagnets
I've read this entire thread, and it comes to me that it only makes sense that this thing should generate some power and oscillate if you can make and break it at points 5 and 6 properly.
You've created an electromagnet with a north and south pole if current flows through the wires. If this is oriented correctly (not up and down but horizontally and opposite to the earths natural magnetism/earth current), you've disrupted the natural flow of the earths magnetic field/current, so when shorted momentarily, you've allowed the earth to resume it natural flow, which starts the process all over again.
Once a pulse (or initial break) has been input to start this oscillation, it should continue if the materials and strength of the coil are correct. Maybe it needs a pulse every now and then to keep it going. Then, as stated by several of you, add an additional coil to accept this induced current and you have a source of power...how much power is a question. Or you should also be able to take the spike off the interior coil, as in the Bedini setups, as the coil wants to inhibit that current and should generate some level of voltage spike which will also charge capacitors.
I wonder if it is galvanic action or magnetism/earth currents. I'm guessing magnetism or earth currents that cause this to work. Maybe it is a combination.
I wonder if you can use this to drive a bedini SSG wheel, as Aaron has already shown a solid state replication with capacitors...just radiant with basically no amperage. I also wonder about using R60 welding rod as in the SSG for the core of this NS device. Seems like this could increase the capability over just a bolt.
What if the SSG wheel (turning) was the make and break that caused a transistor to turn on and off, making and breaking points 5 and 6? The wheel would turn at the proper rate for the coil and earth currents...allowing power to be drawn from the device at no cost.
LLast edited by ldissing; 01-17-2009, 02:52 PM.
Comment
-
Kingman no amp all potentcial no power in it. its crap
Great ideals gentlemen
ldissing i think your right in the patent he said it can power a wheel/trigger system
I think this is the same thing http://www.energeticforum.com/renewa...ator-coil.html
Comment
Comment