Imhotep's Radiant Oscillator Video

[braden]

Re amplitude

The higher we can get the AMPLITUDE to be in relation to the average line, the bigger will be the window for the Aether – the MORE universal energy can enter. Oh yes…….what is the story of those special waves called ***** SOLITON *****?
Aromaz
I think you are spot on here ,have you looked at the TRIODE valves, old radio vacuum amplifying valves ,these may be worth adding to your circuit to get what you are now looking for

[Inquorate]

New video

Wood seems to amplify the 'not capacitance effect'...

YouTube - Inquorate 16 salt water cap

[Vortex]

YouTube - Bodkins 40.AVI

http://ca.youtube.com/watch?v=EddcotROmzc

http://ca.youtube.com/watch?v=7yvL86Cl1XE

YouTube - Bodkins 43.AVI

thanks Arron

@All, some videos still processing
I had to do this before Lidmotor
will do a scr neon charging battery video next!!

Ok LOOKING-GOOD ..!!CAPS!!
I was able to view video 40 and 43 but not 41 and 42
41 and 42 seem to be missing or is it just me?

[Aromaz]

Vacuum Valves

The higher we can get the AMPLITUDE to be in relation to the average line, the bigger will be the window for the Aether – the MORE universal energy can enter. Oh yes…….what is the story of those special waves called ***** SOLITON *****?
Aromaz
I think you are spot on here ,have you looked at the TRIODE valves, old radio vacuum amplifying valves ,these may be worth adding to your circuit to get what you are now looking for

@Braden; Indeed I did. I have two postings here. One very...long time ago and the other on Page 52 Posting #1532. time goes so fast, feels like yesterday. Took me a while of searching to find that!

I have now 8 different types but can not seems to get similar results.

[Inquorate]

Bodkins vids

At moment they say 'not available' to me. still processing?

[Vortex]

What's Happening

Wood seems to amplify the 'not capacitance effect'...

YouTube - Inquorate 16 salt water cap

Right after about 5:14 into your video the sound goes dead.
Is that Just ME again having personal problems or is the sound
missing for that part of the video?
The camera goes jerky all over and the meter is racing up and down
and I'm thinking Dang what's going on, talk to me tell me what's happening.

How's your X-Ray detection badge holding up there Inquorate?

The WOOD? please explain ..
I saw you touch the table and the light lit up. Did it not light up with your
hand as close but not touching the table? And your circuit is wood based and
the table is wood also?
That's the greatest distance "effect" seen so far which was not part of
the circuit I think or am I mistaken?

[Aromaz]

Sparks everywhere~!

Damn! I wish I had this 'Secrets of the Cold war' manuscript earlier!
If you have it, refer to Page 30 last paragraph and upper half of Page 40.

"......Thomson made for the door and was abruptly stopped. Touching the brass knob on the otherwise insulated oak door, Thompson received an unexpected sizzling shock....... the two gentlemen ran throughout the huge stone, oak and iron building with insulated metal objects.......however distant from the coil or insulated from the floor, produced long continues white sparks...."

Page 40....."This is the departure point in which Tesla abandons research and devellopment of HF AC. Divorcing himself of that field entirely......could be so continuesly produced from a single wire......Tesla began to relize the true nature of the fine issuing "gas" which projected from wire ends immersed in oil...

He now prepared..... copper plates.....

Strange that it seems I have unknowlingly gone through the same set of sequence and experiences. Funny thing is yesterday I bought a number of additional copper and aluminium sheets for 'possible future experiments' though not yet decided what to do exactly. I was also trying in vain to get transformer oil.....

I wonder........ Who? What? is leading us?

[Inquorate]

Sound on my video.

Dammit. Well, to begin, the ignition coil and salt water capacitor and electromagnet and glass eyedropper spark gap tube and cfl are all 'glued' with one of those arts and graft hot glue guns, to a piece of (maybe treated?) pine wood. That wood is sitting on the table you see, which is thin veneer of probably pine, and chip-wood.

The system would be on but not jumping the spark gap, and I could put my hand 5 cm from setup and hertz measured from (unconnected, due to spark not jumping) ground would lower, but spark started jumping and cfl would light up... When I held hand 30cm away just above wood of workbench, no change. When touched wood of bench, sparks started jumping. I noticed this yesterday but didn't really twig that wood was amplifying / channeling my aetheric disturbance ? further from me?

More study must be done... Try holding long metal pipe -insulated - and touching far end to various places, versus wooden pole versus plastic pipe.

After that, I connected Alfoil side of saltwater capacitor to 3rd ground over spark gap. While sparking, the ground from cfl frequency is what you saw. On good connection, coil hummed but cfl and first spark gap died. what I said that you couldn't hear issue that I will set up a proper magnetically quenched spark gap from there to 2nd cfl to ground and see what happens.

@Aromaz, don't know who or what or how we're being 'guided' to do stuff, but I say if it probably won't kill you, follow the urge, no matter how nonsensical it seems. We all should. For example, I want to put a coil before my spark and after my saltwater cap. Dunno why. But now I will.

:-)

[Aromaz]

Videography tips

A few tips to try and improve on your video presentations.
Not that I am an expert! I am also learning how to this better.
Because I learn from my own and your mistakes and good points,
I would like to share the following:

A: Do not keep you camera in your hand, rather get a cheap tripod; or if you can not afford that, just use and surface and some clay to mount camera on. Broomstick or bamboo can also do wonders with a lump of clay on top.

B: Always give overview of working; remember the other people watching your video does not know exactly what you know. In other words, get a perspective view, then zoom in (or move closer) to the point of interest.

C: Always have light BEHIND your camera.

D: A very practical useful tool is a LED torch - one of those new High Power ones. See photo attached - here in Thailand I bought for US$ 1.50. This light is suitable strong and colour so allow your video camera to see more clearly - and right colour. You can see in my video # 024 (just gone active) where I am using exactly this torch. Nice to have it with definite spot ability.

E: Rather use a pointer to point to items on your circuit than moving camera in close.

F: Place your digital meter so that you can move freely and still have multimeter somewhere on screen out of workspace, but in film – VERY important else you loose effect is to check through camera if you can see the numbers on the meter.

G: Try to use different colour wires for different purposes. It makes it easier for other people to understand/see what you did. i.e. My earth is always and alone - green, Battery Positive is red, battery negative is black. All other wires are mix of colours so when someone looks at video it is easier to see what goes where.

OTHER TIPS:
1: Mistake I did myself : Spark gap adjuster must have bigger round head. To use screw did sound like better idea, BUT I found it terminates the spark easier than something like drawer button which has bigger, smooth polished head.

2: Keep your camera as far from the HV as possible. HV makes the thing stop performing well – so many videos I though I made, only to see later either no video or no sound.

3: Take a short trial video and then look at it to get idea what other will see – see if it is detailed enough.

Meant in all good spirit because I really do appreciate all your efforts to get us see your experiments.

At last my video #024 is active with ground effects on farm
YouTube - Aromaz 024 - Test on Farm and Ground Earth.MP4

.

[Bodkins]

Ok LOOKING-GOOD ..!!CAPS!!
I was able to view video 40 and 43 but not 41 and 42
41 and 42 seem to be missing or is it just me?

Uploading again

[Bodkins]

sorry everone here they are ENJOY

YouTube - Bodkins 40.AVI

YouTube - Bodkins 41.AVI

YouTube - Bodkins 42.AVI

YouTube - Bodkins 43.AVI

[Aaron]

357116hz

the frequency is 357Khz

Hi Luc,

Nice job! Are you able to adjust the frequency super specific?
If you can do it at 357116hz then you will have a multiple a universal healing frequency.

[broli]

Has anyone tried water at the high voltage terminal. You guys might have already found a hho producing system without realizing it .

[broli]

No you're absolutely right stringguy. The main focus should stay trying to extract energy from the Aether. The sooner that gets the done the sooner everybody's wildest dreams gets fulfilled here. Something as trivial as hho production would be obsolete then. So I should apologize instead.

[boguslaw]

Damn! I wish I had this 'Secrets of the Cold war' manuscript earlier!
If you have it, refer to Page 30 last paragraph and upper half of Page 40.

"......Thomson made for the door and was abruptly stopped. Touching the brass knob on the otherwise insulated oak door, Thompson received an unexpected sizzling shock....... the two gentlemen ran throughout the huge stone, oak and iron building with insulated metal objects.......however distant from the coil or insulated from the floor, produced long continues white sparks...."

Page 40....."This is the departure point in which Tesla abandons research and devellopment of HF AC. Divorcing himself of that field entirely......could be so continuesly produced from a single wire......Tesla began to relize the true nature of the fine issuing "gas" which projected from wire ends immersed in oil...

He now prepared..... copper plates.....

Strange that it seems I have unknowlingly gone through the same set of sequence and experiences. Funny thing is yesterday I bought a number of additional copper and aluminium sheets for 'possible future experiments' though not yet decided what to do exactly. I was also trying in vain to get transformer oil.....

I wonder........ Who? What? is leading us?

Aromaz,

that's all true but if you look at tesla lectures radiant effects are there also with AC current, and your experiments may prove it.If you have stationary longitudinal waves on output of your coil then there should be nodes there.It's so easy to check it.Like in gotoluc video - sliding a neon on bare wire connected to coil output (and placed not on table but in air on supportive wood or other insulator support) would show a bright and dark spots of light.