Imhotep's Radiant Oscillator Video

[Guest]

Another interesting thing; I saw it is claimed Tesla used vacuum tubes instead of SS devices in his Pierce Arrow car. Anyone has details on that one? Remember EM waves travel best in vacuum, air should be the second best.

About the neg pole of the charge battery you are right(earth is a negative pole too) but I see the receiver path coil-cap-negative pole-positive pole - true earth as more attractive. I guess Gray tried that too at least in one of Bedini´s drawings I saw something like it. Anyway you just need to try it.

Another wild idea, try to place a spark gap near a rotating sphere so the sphere is not connected by wire only the spark gap...

@Nat, Bodkins, I think you are making great stuff and soon we will see some serious stuff I am convinced. Imagine in 6 months where you will be!!

I truly hope the best for your experiments, my time for experiments is not yet there.

[Bodkins]

ITs Just A Ride
YouTube - Mind Over Matter
YouTube - Resonance
YouTube - VORTEX Energy Part 1 Pyramid Energy and the Earth Grid

[braden]

Key part of the puzzle

Guys
Bodkins and I have been reading up on the following work
If you have time, please take a look, you will not be disappointed.Its amazing to think how much of your work has paralleled these findings

[braden]

further important pieces

Again here are some important pointers to the direction we are all heading
AMAZING TO THINK HOW MUCH OF THIS OVERLAPS WITH
NATS ,LIDMOTORS AND BODKINS WORK
BERLIN LECTURE: LECTURE NO. 27
http://www.google.com/patents?id=fE5...mcfarland+cook
OUR ENERGY FUTURE

[Bodkins]

Thanks Braden
One thing to ad, Sphere on the trigger and a sphere on the primary. the two need balance and tuning to resonant, One problem this will blow your pot and trany.But thats good

ps dont forget the ground.
Good luck

[nat1971a]

@braden

more cylinders within cylinders.....the cat is now out of the bag folks!!!!........cop that big business...free energy is coming!!!!............. good work!!!!!....will have a more detailed look at this patent.....

p.s tesla's squirrel cage is also a cylinder within a cylinder....refer patent 1119732 item C is the squirell cage.....and was Tesla's last design improvement around the period.....

Cheers

Nat

[nat1971a]

apparently the joe cell is also a cylinder within a cylinder

[nat1971a]

awesome braden...i had gotten about this...had seen this before....will have a better look

[Bodkins]

@nat it works with sphere too they are caps thats all, the magic cap!!!
you need the sphere at a 60degree angle to get it to work in line with the cosmos.
@lidmotor the reostat on the primary with the ignition coil with spheres and the trigger will need some kind of pot that can take HV with sphere at a angle too.
My next step is load between the sphere so they dont overload the setup.


TO A NEW WORLD

[Aromaz]

A step back - to look

This might be a step backwards for most, but I am still trying to catch up with you all here. However this might be of some interest.

Sweetspot:

Define - Where the maximum output of energy is achieved after the coil. When tuning, it is usually noticeable as a sudden increase of brightness in the light or amp out on a meter.

I will on this stage dare to make an observation: The ‘sweetspot’ is in actual fact the ‘resonant frequency’ of the coil/circuit. Weather this has been stated elsewhere or not I am not sure; have not seen yet. This came from a series of experiments I am doing with resonant frequencies. Off course, I will have to do much more work on this, but it might be of interest to some in this group.

In relation to the Imhotep as well as Bedini circuits I played around with changing of the pulse frequency – used 555 circuit on Imhotep and monopole wheel controlled RPM on Bedini. I do find the ‘sweet spot’ is actually resonance frequencies of the coil.

As first setup I used different bi-filar coils on both systems:
A) The same coil has nearly the same resonant Hz in both systems. Differences were very small at less than 10%.
B) Different coils re. wire gauge or number of windings have very different resonant frequencies.

As second setup I used four different ignition coils (brand names, weight and resistance). Here there was a much bigger difference in primary resonance varying from lowest 473.8 Hz to the highest at 764.3 Hz.

I am now expanding these experiments and looking into the effects of the harmonic resonance. I only did this on SSG. Hopefully this weekend can play around with settings on Imhotep. Very preliminary findings are on the Bedini SSG there are different ‘sweetspots’ starting from as little as 120 RPM and still getting them at 2,300 RPM. Though the speed control on Bedini is not as accurate as the 555 timer on Imhotep – it seems the best of these are around 300-450 RPM (4 magnet wheel, 22.3cm spacing = 1,600 Hz). When actually measuring the Hz on the switching wire, I found it very unstable – fluctuate as much as 15%. I guess this must have something to do with the flux movements of the magnet and fluctuation of the coil core.

On my best wound bi-filar coil – 950 windings #23 and #26, close together but not twisted I found the resonant frequencies as follow: 231 RPM, 427 RPM and 854 RPM. Thought this is not 100% on the spot, and the wheel is not exactly controlled it does seems there is a harmonic frequency with the root around 427 RPM where I get the highest output spike = best performance.

Question: Did anybody here do similar experiments?

It is possible that a great part of our quest will be related to the exact frequencies of the oscillation we are creating. The closer we can get the systems to self-resonate - at its own sympathetic frequency - the more power we will get AND better is the possibility to achieve self generation and the less input energy we will need to keep it going.

[Aromaz]

A stupid question

but it seems I can either not find or might not read something correct somewhere.

Let me explain by example of water: Water from tank has outflow of say 500 Liter per minute(LPM). The outlet pipe splits into two, one has a valve which controls the flow at 200 LPM maximum and the other has a pressure controlled valve that allows only the excess water (i.e. 300 LPM) to pass. Thus in this system the priority is to get 200 LMP through the first pipe and the excess only through the second.

Now I will try to translate this into an electrical circuit and explain where I need help. Let us say we have a flow of energy from a battery (500 Joules), then we split the outlet wire into two. On the one line we add a 200 J resistor to allow only 0.0 up to 200 J of energy through. Easy.

But now the ‘pressure valve’ is where my difficulty comes in. I want this other ? controller ? to remain open (not allow energy through) while the supply is between 0 and 200 units. Then when the energy rises above the 200 units, it must allow the excess to pass. Thus this one is only getting active when the first conductor is ‘fully loaded’.

WHAT kind of modern day instrument/circuit/device can I use for this ‘control valve’.

NOTE: I did see this were done in the early 20th century by use of the old glass ‘valves’ (Tesla/Moray) – which today are transistors. But transistors do not comply with requirements of High Voltage.

Ultimately I want to use this on the HV side of the ignition coils; thus transistors with mV control will not be able to handle the HV (expect between 6,000 and 20,000 Vdc). I want to experiment with a ‘bouncing’ effect on the outlet side of the ignition coil – i.e the back EMF.

200 Vdc should pass through and cycle back to operate the system. The balance/excess is to be dumped in a large home made capacitor and used from there for applications.

Dreamer? Wishes? Stupidity? Well I have been accused of worse.

[Guest]

Please check this one:

http://www.jsedip.jp/3-papers/2005/I...05_Tokachi.pdf

So here we go, this means the tree has a receiver circuit for cold current changes(radiant charge changesetc). As mentioned in another thread about volcanoes and HHO. I suspect true HHO(magnetic) is present below the surface where we are standing above.

Assume radiant charge is the difference between the earth magnetic field and the B-field strength of the radiant pulse. The tree will receive the difference immediately even though it takes days until something happens at the surface of earth.

So the receiver should include a "tree geometry", that is my opinion.

[nat1971a]

There is some major connections between Harold Aspens patent and Edwin Grays work conversion tube & circuit....I might modify my circuit this weekend to test out harolds cylinder connections and see what happens.....

[nat1971a]

@bodkins

whats this about 60 degree angle?

[nat1971a]

@gauss

thanks for the info