Imhotep's Radiant Oscillator Video

[ren]

@ren/all

the conversion tube is bizarre....still trying to understand exactly how it works....have been playing with it for a while...and still learning from it....it is unlike anything i have ever seen. i am convinced this is very important

@bodkins

Yes you are right they are Aussies. I believe there are quite a few aussies posting on this forum from what i gather.

Cheers

Nat

Yup, a few Aussies here, myself included. I will look into the tube a little more soon. I just threw a super quick vid together of the igntion coil arcing. Everythings a mess, and the filming is shoddy, its hard to hold the ground rod, adjust the PWM and film at the same time. I can get pretty decent light with it directly connected. The longer the arc is the more it draws generally. On the vid amp draw is between 300ma up to 4 amps.

Anyhoo. Enjoy. Im off to clean the ozone out of my nostrils. LOL @ Bobkins....
YouTube - arc

[Inquorate]

tesla stationary waves

Just re-watched my own video, the last one. Sound goes off at end, so maybe wasn't clear that ignition coil was off when disconnected ground was vibrating at 1.5khz, giving 2v ac. I'm thinking now having watched Boxa888 vids, maybe I set up one of Tesla's stationary waves??? And it persisted??? Will try duplication when I get home tomorrow night.

Ps I'm also an aussie. Quite an ingenious lot, very creative.

@bobkins, don't know how you stand living in pommy land.. That's where all those awful convicts came from :-)

[Bodkins]

feels like there all still HERE

[Aromaz]

New video's

Today is holiday in Thailand - and it was awful hot. So later afternoon I came to hide in aircon place. I posted three video's:

#018a - YouTube - Aromaz 018a - Full day run, additional info and comparison Part 1.MP4
Running full day with small 4.5A/Hr

#018b - YouTube - Aromaz 018b – Full day run, additional info and comparison
Continue af 18a - plus here I show full light in 240 Vac mains to compare strength.

#019 - YouTube - Aromaz 019 – DRE Peek from single line and to wireless
Some cutlets from earlier today and then a little peek into more advancement.

Wireless:
I found wireless transmission earlier this week - Tuesday. This was purely by accident; a spare tube on the table flickering. Has gone quite a bit with it. Now can light up my CFL to about 60% at range of 120 cm. Expanded more with it. Now reading Nat's work from earlier postings to see how it can all fit together while waiting for earth battery setup.

@Inquorate - Charging kitchen tap, misses coe to wash dishes. She gona kick you more then Hight Voltage!

This forums rocks more - I see so many things happening and at first might look like it is running different directions - but then suddenly it all comes together.

HOW I SEE IT – as Bodkins said “good things on the horizon’
Coils, oscillations, ground, Ren’s toroid, Bodkins tube and earth, Lidmotor’s ideas – all is coming closer together and will become one HUGE break through. Might just be big enough to Rock the World. Imhothep should start writing our song!

[Inquorate]

Zapped by casing of 2nd ignition coil.

2 grounds. Nothing happens in this video, wasn't going to post it but I been thinking... after I did this video, with system on, I touched case of 2nd ignition coil and got zapped. ??? Shouldn't happen if magnetism or induction are the only energy given off. More testing to do when I get home tomorrow. No zap from 1st ignition coil casing. Yes, dumb enough to touch it even after getting shock from 2nd coil case. I'm thinking that oscillating the coils creates longitudinal compression waves in aether. These waves or oscillations of aether particles jumping in and out of their matrices give off electrons, OR when aether particles pass thru atomic latticework of metal casing, creates electrons. Thanks to braden on energeticforum.com who pm'd me re my ramblings about why transistors switching. Helped clarify in my mind what is going on.

YouTube - Inquorate 14 - 2 grounds, not singing back

If link don't work (I chop it up, my phone gives link for phones, not pc) search Inquorate 14

[Aromaz]

Toroidal Spheres

YouTube - TESLA'S RADIANT ENERGY WIRELESS TRANSMISSION - UPDATE 21 /EDWIN GRAY HYBRID CIRCUIT


More wireless radiant energy transmission lighting lights up

Nat - Just a thought that puzzled me for a while, result from one of those strange dreams a while back.
It will take some time before I can catch up with you.
Those spheres you have up outside (RE: Video) - They are empty inside?

I am just wondering if a coil or even a toroid inside those spheres will have effect on receiving especially. Maybe you can look into this? Thinking back as Tesla's tower - that upper part looks awfully like a toroid coil? Also remember my much earlier postings where I used the toroid on probe end to pick up emissions from early systems.

[Aromaz]

Longtitudal? Worthwhile to look

2 grounds. Nothing happens in this video, wasn't going to post it but I been thinking... after I did this video, with system on, I touched case of 2nd ignition coil and got zapped. ??? Shouldn't happen if magnetism or induction are the only energy given off. More testing to do when I get home tomorrow. No zap from 1st ignition coil casing. Yes, dumb enough to touch it even after getting shock from 2nd coil case. I'm thinking that oscillating the coils creates longitudinal compression waves in aether. These waves or oscillations of aether particles jumping in and out of their matrices give off electrons, OR when aether particles pass thru atomic latticework of metal casing, creates electrons. Thanks to braden on energeticforum.com who pm'd me re my ramblings about why transistors switching. Helped clarify in my mind what is going on.

YouTube - Inquorate 14 - 2 grounds, not singing back

If link don't work (I chop it up, my phone gives link for phones, not pc) search Inquorate 14

I too got spiked today a few times from coil. Wrote it off to careless and possibly other factors. It is just very possible you might be pointing out a possibility.

Also one serious jolt from negative terminal of battery when I disconnected it. Thereafter it is plyers only. Regardless all care I take now, that plate on video #-19 was the last shock - and strongest ever to this date since I started with these things four months ago.

[stringguy]

Ps I'm also an aussie. Quite an ingenious lot, very creative.

@bobkins, don't know how you stand living in pommy land.. That's where all those awful convicts came from :-)

ha, i'm also an ozzie, but live a few hundred k's west of bobkins, where its green and freezing, but the beer is better....
envious of Aromaz..in that beautiful place he lives.

how smart are the poms? sending their convicts to a tropical paradise, haha

all of you guys are just fabulous, i'm becoming addicted to this topic, its exciting, and i feel as well that you are all on the brink of something amazing that gives hope for the future.
bless you all.

[Inquorate]

@Aromaz

Have you connected another ignition coil in series to first without neg of 2nd connected to anything? Or did the coil case of only one coil zap you? Maybe it is like electric fence where you hold someone else and then touch fence; only the end person gets shocked? -always funny, that trick -

But yeah, has to be creating electrons, 6000 volts isn't enough to penetrate the oil / bakelite insulation and it's got no inductance cause it's not a coil of any sort, so it's not electromagnetically 'coupled' in any way... It does have a little capacitance maybe. Tesla said capacitors can have charge added or removed when exposed to radiant streams.

We could measure voltage coming off case to a ground (a third ground wire? ''No, sweetiepie, I don't think I'll need a pillow, this couch looks comfortable enough, thankyou..'') and then wrap case in alternating layers of clear book laminate and Alfoil.. See what happens then...

I'll try that.

Ps, the wire coming off 2nd coil in my video #14, point it at a capacitor that has neon and ground wire off neg terminal, and neon will light. Even with piece of wood in the air between.

Having watched boxa888's vids, I don't think that kind of wireless will run a load, as it's still caught up in hertzian waves, which apparently tesla says we need to get rid of, else earth is just a capacitor...

So much to do!

[stringguy]

@Inquorate
build Nat's TP roll conversion tube around your 2nd ignition coil ???

[Inquorate]

@stringguy

Yeah, something like that. I'm going to use that clear sticky on one side plastic 'contact' stuff libraries put on book covers.. See if charge increases with more layers, so I'll leave a little petticoat of Alfoil tabs around her base, and I shall call her mary... And she can stay with me on the couch...

[Bodkins]

getting there Aromaz

[Aromaz]

I wan'na play with sparks too

I looked at Lidmoter's video again and, as few times today, though I also want to play with sparks like THAT! So, on the way home - 2 hours or so ago, I thought let me just go and see.......

Well it is nearly time for the date to change here, so I am uploading this video and go to sleep.

BUT:
I got amazing light, reasonable sparks - NICE TOY!
Plenty of 'ozonging ozone'
MORE light
No heat - little warmer than body
and new possible direction to investigare - SOUND

Lastly, now while uploading looked at earlier videos to review - I realized I am still playing with same battery (batteries now) that this whole thing started up this morning. Same small 'whatevers; and they have been giving me fun for 16 hours - thouh this last while probably used lots of amp draw??

Went to check quickly: #1 is 12.16 and #2 is 12.19 volt.

@ Ozzies, I am happy more joined! Was little long-lip because I was almost alone on this time line!

Video # 20 is just a bit of time off - SORRY: on review it seems the first part with nice sparks went AWOL. will fix tomorrow.
YouTube - Aromaz 020 - I wan'na play sparks too

Good night.

[Aromaz]

THAT is a BIG one

getting there Aromaz

Bodkins, THAT is a long one! 32 Watt? #24 wire? Watch out, it does not make sense but those wires can shock real hard! I had mine with 24V into coils and both HV's on one side of fL/tube - that shock was worse than a camel kick!

See your video tomorrow!

[gotoluc]

Today is holiday in Thailand - and it was awful hot. So later afternoon I came to hide in aircon place. I posted three video's:

#018a - YouTube - Aromaz 018a - Full day run, additional info and comparison Part 1.MP4
Running full day with small 4.5A/Hr

#018b - YouTube - Aromaz 018b – Full day run, additional info and comparison
Continue af 18a - plus here I show full light in 240 Vac mains to compare strength.

#019 - YouTube - Aromaz 019 – DRE Peek from single line and to wireless
Some cutlets from earlier today and then a little peek into more advancement.

Dear Corrie Lamprecht,

I must congratulate you on proving your current draw is really in the 16 or so micro amps draw since there is now way you could have had all this light running for 20+ hours on such a small battery and have next to nothing in voltage drop. It is unfortunate that the voltage was not taken before the experiment was started but we know a 12v battery is full charge around 12.88 and your battery was around 12.80 after the 20+ hour test.

After seeing video #018b where you separate your Dual system system setup and the amp draw returns to the milliamps range like everyone else here have, it is clear that this DUAL setup is the way to go

I also see that you have wounded a new tube with more copper wire with 920 turns. However you have not mentioned if there is a change using it, like more or less amp draw or more or less light, compared to the first tube coil you have been using for your 20+ hour test.

Could you please do a test on your Dual setup by removing only your Tube Coil and after check the amp draw in order to conclude if it is the tube coil making the difference (low amps) or is it the Dual setup that is making the difference.

Thank you for your great work and sharing it.

Luc