That was unexpected.... (Magnacoaster)

[vrand]

@everyone,

looking at the picture slayer007 posted above and now knowing it was actually one of Richard's builds and not an attempted replication by someone, I realize that a very important component is missing!... anyone noticed that there are no rectifiers

I have made many tests to try to replicate his effect but I never tried it without diodes... could this be actually creating internal resonating pulses inside the battery itself, since it has no rectifiers?

Anyone care to share

Luc

Interesting idea to try out

Richard also says that regular lead acid batteries are the best to use, and now says that gel cells were not as good as lead acid bateries.

Richard says that he pumped in up to 200 volts into his batteries at one time and worried that it might explode.

Bedini and Beardon also said that lead acid batteries are keys to tapping unlimited power from the unlimited vacuum.

-Mike R.

[darkwizard]

Is a liar, case closed

[gotoluc]

Interesting idea to try out

Richard also says that regular lead acid batteries are the best to use, and now says that gel cells were not as good as lead acid bateries.

Richard says that he pumped in up to 200 volts into his batteries at one time and worried that it might explode.

Bedini and Beardon also said that lead acid batteries are keys to tapping unlimited power from the unlimited vacuum.

-Mike R.

Hi vrand,

thanks for your reply post.

I did hear of what you posted above but sending AC to a DC Battery is not something I have heard of, nor have you mentioned it in your list.

To test this, one would need to find a battery that can be wasted since it may kill the battery to do this. There could be a specific size of coil to a specific battery size (effects of impedance between each) that at a certain frequency the battery itself would start to resonate which could create some extra pulses to which would go back and forth through the coil and magnets during the pulse period to which may amplify the pulses.

As I have posted before, I am capable at this time to use magnets on a coil and it doubles the output but the input power also goes up. But if we can get to input (source battery) to resonate then maybe we would have a different result.

I can create this effect in my coil at resonance (see below) The green is the coil output and believe it or not the yellow short peek is the pulse which lasts only 1.6 micro second. As you can see the coil can give many more kicks under the right conditions.

Now, if we could do that inside a battery! I think we may get extra energy back.

So much to test and so little time and money to do all this.

If Richard really has this, I think it was by accident he hit the right combinations.

Luc

[patmac]

Interesting PDF...

@vrand and everybody
Ok, we can think on this...

Look the pic botton on attach.

We visualize a coil bifilar, first wire awg18 iron+aluminium can be better, then the second wire copper awg24, rolled (twisted) around the 18 wire, this form some like the coil around the 18 wire like core, then this bifilar cable, rolled aronund the coil core.

This can capture the Afield of the Iron wire throuht 24 wire like recovery, used like power coil, the motor must be controlled by mechanical swith or reed, etc

[vrand]

Hi vrand,

thanks for your reply post.

I did hear of what you posted above but sending AC to a DC Battery is not something I have heard of, nor have you mentioned it in your list.

To test this, one would need to find a battery that can be wasted since it may kill the battery to do this. There could be a specific size of coil to a specific battery size (effects of impedance between each) that at a certain frequency the battery itself would start to resonate which could create some extra pulses to which would go back and forth through the coil and magnets during the pulse period to which may amplify the pulses.

As I have posted before, I am capable at this time to use magnets on a coil and it doubles the output but the input power also goes up. But if we can get to input (source battery) to resonate then maybe we would have a different result.

I can create this effect in my coil at resonance (see below) The green is the coil output and believe it or not the yellow short peek is the pulse which lasts only 1.6 micro second. As you can see the coil can give many more kicks under the right conditions.

Now, if we could do that inside a battery! I think we may get extra energy back.

So much to test and so little time and money to do all this.

If Richard really has this, I think it was by accident he hit the right combinations.

Luc

Bob Boyce adds a bias 170VDC voltage to his 13.8VAC waveform that he feeds into his 100 series cell hydroxy unit.

That AC waveform was pulsed through a toroid and was the key to making 5 to 100X Faraday gas output.

Maybe Richard Willis does the same thing with his magnetic unit to feed his lead acid batteries?

-Mike R.

[gotoluc]

Hi everyone,

below is a new video I just made which is a test I would like to share. I posted it in the Resonance topic and thought to share it here also because of the components I am using.

What I'm finding is if a certain size of Neo Magnet is introduced in a certain size opening of a Air Core Coil and is Pulsed with Sine Wave or Square Wave the Magnet starts to Oscillates at a certain Frequency, nothing new right!... what is new to me is it started to reduces the Amp draw of the Coil and at a certain frequency I was able to reduce the input power by about 350% or from 79 milli amps to 23 mili amps.

I find this to be an interesting effect!... we also need to keep in mind that I'm using a off the shelve coil core opening and magnet I had. I am quite sure the effect can get much more efficient once we study it better and find the best configurations.

Video Link: YouTube - Vibrating Magnet Coil test 1

Some of you maybe thinking what would happen if a load is attached .... would it still show a reduction of current ... and the answer is yes!... I did try it with a load and it definitely shows current reduction as the frequency rises. The load was a tinny 12vdc car dash bulb and the brightness of the bulb goes up as the frequency rises and the amp draw goes down to a point where the magnet can no longer hold in the core opening on its own and falls out if the frequency or load is too high.

Please tell me what you think of this effect. If you think it to be off topic you can go and post your comments at the Resonance topic: http://www.energeticforum.com/renewa...html#post51274

Thanks for your time.

Luc

[Ted Ewert]

Hi everyone,

below is a new video I just made which is a test I would like to share. I posted it in the Resonance topic and thought to share it here also because of the components I am using.

What I'm finding is if a certain size of Neo Magnet is introduced in a certain size opening of a Air Core Coil and is Pulsed with Sine Wave or Square Wave the Magnet starts to Oscillates at a certain Frequency, nothing new right!... what is new to me is it started to reduces the Amp draw of the Coil and at a certain frequency I was able to reduce the input power by about 350% or from 79 milli amps to 23 mili amps.

I find this to be an interesting effect!... we also need to keep in mind that I'm using a off the shelve coil core opening and magnet I had. I am quite sure the effect can get much more efficient once we study it better and find the best configurations.

Video Link: YouTube - Vibrating Magnet Coil test 1

Some of you maybe thinking what would happen if a load is attached .... would it still show a reduction of current ... and the answer is yes!... I did try it with a load and it definitely shows current reduction as the frequency rises. The load was a tinny 12vdc car dash bulb and the brightness of the bulb goes up as the frequency rises and the amp draw goes down to a point where the magnet can no longer hold in the core opening on its own and falls out if the frequency or load is too high.

Please tell me what you think of this effect. If you think it to be off topic you can go and post your comments at the Resonance topic: http://www.energeticforum.com/renewa...html#post51274

Thanks for your time.

Luc

Very interesting, thanks for sharing.
It's basically a Newman motor, except that the magnet doesn't go all the way around.

Cheers,

Ted

[gotoluc]

Very interesting, thanks for sharing.
It's basically a Newman motor, except that the magnet doesn't go all the way around.

Cheers,

Ted

Hi Ted Ewert,

I think the Newman motor also has a switching mechanism... this has none.

So I don't think it's a Newman motor since two of Newman's most important principals for the operation of his motor are not present.

Luc

[Ted Ewert]

Hi Ted Ewert,

I think the Newman motor also has a switching mechanism... this has none.

So I don't think it's a Newman motor since two of Newman's most important principals for the operation of his motor are not present.

Luc

The whole point of a Newman motor is a pulsed coil with a magnet in the core. The pulse rotates the magnet, which then induces current back into the coil by virtue of its rotation. Whether it's switched or pulsed, the same mechanism is in effect in your set up.
Put a ball magnet in your core and the thing will really spin.

Ted

[Jules Tresor]

it's AC, not DC

Hey Luc,

I understand better now that you said it's AC !

I was also thinking about pulsed DC like in Newman motor, but in that case we couldn't get the magnet flipping in 2 ways. Unless we had 2 coils, one for the DC pulse and another one for the collapsing pulse going in opposite sens; but even in that case, the collapsing pulse being little bit lower in power as the original pulse, the magnet wouldn't flip symetrically..

It's AC, so everything is different ; very interesting Luc !

Amazing the influence of this little magnet inside the coil.

Great interesting stuff as usual Luc
Blessings,
MDG

[BUGS]

Any one checked out magna lately?I think it was Stirling's site, I seen his patent,very interesting,reminds me of Don Smith work of magnetic resonance flux.Don said when you produce a magnetic flux you can collect it as many time as you like,without drawing any more power.
I have his patent No. some where? Lost in the mountians of papers!
Regards Ivan

[Burned_NE2]

Hi Bugs & All

There was an update posted at OU.com about this with theaudio interview and patent links:

Hi All

Sterling D. Allan has updated information on the latest "Magnacoaster Vorktex nearing commercial rollout" at Magnacoaster Vorktex nearing commercial rollout which includes an audio interview and also a link to the patent at esp@cenet — Bibliographic data which includes schematics and information that may be of use to some in trying to figure out how this device works.

Thank you Sterling D. Allan and Richard Willis for the update

Regards,
Paul

[gotoluc]

Thanks Paul for Posting this new information

Luc

[Mark]

esp@cenet — Bibliographic data

Here is a link, go into original documents and look at pages 16 and 20.
The way I look at it no power would even be going to the output both paths are blocked by diodes.

[darkwizard]

it seems a lie