Aromaz Radiant Energy Joint Research Group

[Aromaz]

Happy new year

For me it is almost, thus: Happy NEW YEAR to all.



I hope wish and pray that this year 2009 will bring us the breakthrough in Alternative clean pure energy - and that this Energetic Forum will be part of that breakthrough.

May you all have a very good, happy prosperous and exciting 2009.

[Bodkins]

Happy to see you visiting us Aaron!

Yes, that is exactly what I found. Thus a big part for the low energy ‘consumption’ from the batteries is actually due to the continues replenishing from back EMF. It is working like a buffering – use 100 units and immediately give 99 back as BEMF. I am still looking more into this to see how far this effect stretches. If it works very well, can we then reach a state where the BEMF is much greater than the use?

However, there are some difficulties I have; more about that when I can figure out how to display it best. That is in relation to the big 1000 wind tube I used in part of video #028.

Aromaz Its is not back emf it is time potencial Arron said this is the imhotep thread YouTube - Bodkins 39 Time.AVI
its also what the EV gray machine is using.
also static electricity remember what Tesla said about it?
If you have sparks on the terminals you can charge caps with It, I have shown this Too.
I feel things are going around in circles

[Aromaz]

Aromaz Its is not back emf it is time potencial Arron said this is the imhotep thread YouTube - Bodkins 39 Time.AVI
its also what the EV gray machine is using.
also static electricity remember what Tesla said about it?
If you have sparks on the terminals you can charge caps with It, I have shown this Too.
I feel things are going around in circles

I feel like I am in a maze, and yes; running in circles. Every time I think we have something locked up in the cage, there is only another two doors to be found open. The more I scratch the more strange things I get to see. That is why I decided to go right back to the basics - for myself - and then from there to consider all possible options. Get it all mapped out.

You are right about not BEMF -
- I stand to be corrected: BUT

In this circuit there is definitely more than one kind of energy.

That is what keeps on confusing me.
Now I want to differentiate between them,
- identify and only then try to manage them.

We do definitely have Back EMF
– and that is what is charging the batteries and reducing the consumption from the batteries.

We do definitely have Radiant energy
– that is what we find with the sparks and corona
- We do have the blue devil running outside the wires

I do also suspect Vortex to be right about static
– We do have a high potential of static electricity

Now how to separate Radiant from Static. Even Tesla was somewhat confused by the two, so much similar they are.

How to separate High Voltage in the environment
...(my 'wireless videos' are purely HV in the environment) ...
from scalar/soliton waves that transfer electricity wireless?
..... as in completely wireless, no earth connection; not Tesla coil setup.

I think the most important factor here is:
A: Static can not go through matter - Radiant can.
B: Static can not pass through vacuum – Radiant can.
Now there is an eye opener for myself.
Got to find a way to test this energy through vacuum.

Then: In parts of the circuit we do have normal electricity with magnetic field and all; lastly we should also consider the effects of nuclear – for we are working on atomic level, we should also consider the effects of magnetic – and gravity. I will present a video soon about the effects of gravity on this energy! Got some amazing observations and ideas to experiment with more.

See why I am going back to basics? I stacked my other research in the corner and started up with very basic setup and do all possible angles - to get to the root of this whole phenomena; systematically.

Happy new year for you and may this 2009 be our victory in alternative energy.

[Inquorate]

new year

Happy new year all! - went to see fireworks with the missus and she got pickpocketed... No i.d. Left etc......Oh well. Let's see if we can give the bastards free energy eh

me sleep now.

[Bodkins]

Kickback is the Key Word here, Sir William Crookes use spark kick back to light the cathoray tubes to understand Radiant energy/matter Sir William Crookes - On Radiant Matter
I think this is what we see on the termials of the batterys.
This is time, Bedini called it BEMF to get it pasted the patent office.

[Aaron]

back emf vs potential spike

Hi everyone, happy newyears - 14 hours for me to go

Anyway, here is the very literal and specific difference between back emf and the radiant spike.

The back emf is lenz's law - it is the counter current created to oppose the forward current in a coil for example. The back emf is what happens simultaneously while we charge the ignition coil.

Then after the power is shut off from the coil and the magnetic coil collapses - that spike that comes back is this inductive spike, transient spike, voltage potential spike, time potential, radiant spike. It is what comes after the forward charge on the coil and back emf have both already stopped happening.

The back emf is what slows down the charging of the coil - there is no back emf there when the power is disconnected, that is why the magnetic field collapses so fast - there is no counter current (back emf) there to hold it back.

[Xenomorph]

Alternating magnetic field

"the wire gets in montion / jumping - to and from like a pendulum.
Though with compass right beneath this contact point - no movement."

Maybe the compass is simply not suited to measure a rapidly alternating magnetic field ???

It could be that there INDEED is a magnetic field around the high voltage line that doesnt change the "static" polarity of the whole setup`s magnetism. Like you can't measure AC with DC-meters.

Just for better description, this is 2 videos from a guy having magnetic effects
He has put a magnetic ball into a plastic tube and placed it into the middle of a coil and the tube starts moving (logically) and increases the energy output.

YouTube - Bedini EMF Test Free Energy
YouTube - EMF High Speed

The coin in the 2nd video spins at about 1300 Hz (extractable from the audiowave it creates) and i think a compass wouldnt have been able to measure it too, but maybe i am mistaken.

Maybe that gives you guys some new ideas?

[broli]

Aromaz, have you thought of hiring real life assistants in this kind of research? In other words I'm offering myself up if there are positions.

[Inquorate]

No static in a Vacuum

I have a vacuum tube, I'll attach it to the end of hv wire and see if it increases the wireless transmission to a capacitor to neon to ground. Will try tonight :-)

[Aromaz]

Compass test

Maybe the compass is simply not suited to measure a rapidly alternating magnetic field ???

Lately I learned to say "Anything is possible, anything is not possible"

I picked those small compasses because they are very sensitive - have neo magnets. If you look in my video 027 you see how rapid and quick they react with just the small screw driver coming near them. They will not make a good utility compass - way out too sensitive - but excellent for me!

Now, whatever the frequency or strength - unless such magnetic flux terminates completley 100% less than 10mm from wire; it will affect the compass; i.e. even if not turning, it will cause movement on the needle. But it does not. When I test same with 1.5v battey - it does swing the compass. With that amount of spark the flux field should be much bigger than even 10 cm. Then, the whole area are charging up.

Still looking and testing.

[Aromaz]

Aromaz, have you thought of hiring real life assistants in this kind of research? In other words I'm offering myself up if there are positions.

I did and do. I plan on discussion with my investors in coming week during their visit.

Thank you for the offer.

Regards,

Corrie

[Aromaz]

Kickback is the Key Word here, Sir William Crookes use spark kick back to light the cathoray tubes to understand Radiant energy/matter Sir William Crookes - On Radiant Matter
I think this is what we see on the termials of the batterys.
This is time, Bedini called it BEMF to get it pasted the patent office.

The clipping on Sir Crookes is giving light in my dark corner!

"...... and as in the last conversion many qualities were lost, so here also many more would disappear........ four states - solid, liquid, gaseous and radiant ....differences in their several essential properties."

Is it really possible that in two months we have gone from solid (12Vdc relay) to liquid ??? , to gaseous (corona) and now onto radiant - which we do not yet understand, BUT it does loose its typical electrical properties ??

Again it point that we should get the above forms of energy properly defined and listed with their properties. It will be along hard labour to get all their properties listed.

Amazing how little of this is really available on the internet!
Seems like Electricity is just accepted - not dissected, no forensics ??

Come on folks, lets get the most interesting one done first. Could everyone please post whatever you know of the properties in RADAINT energy. What do we know for sure are these - Properties, Appearance, Conditions?

[Inquorate]

@ Aromaz

I posted 3 posts in dmonarch's radiant matter thread, page 3. I forgot to copy text before posting, and can't copy text on webpage from my phone... Could someone copy the text in their pc browser and repost it for me here? Ta, ben

- Aromaz, I believe it's the explanation you are looking for :-)

[sucahyo]

@sucahyo: I already did that; as stated in video I did much more than shown, but this circuit and energy does not conform to expectation – therefore I am back to basics to study this energy itself.

I see.

I ask because I think back EMF flow like water from positive of the battery to negative. Coil act as accelerator or pipe. When you stop the door after the coil, the water stream will be go to anything passable, or reverse if there is only one way.

Did your circuit still the same as posted in panacea bocaf PDF? Since the way I see it you don't utilize back EMF at all. In my opinion back EMF happen when you put coil at the positive part of the circuit, not at negative part like your circuit on panacea document.

What I mean is, I think you will get more back EMF by make car coil replacing the cable between 4 2N3055 collector and alone 2N3055 collector, where the coil primary positive is going to the 4 2N3005 collector. The positive from battery will connect to 2N2222 collector, the alone 2N3055 collector, and the negative of both car coil and neon light. No diode. The emittor of 4 @n3055 will go straight to batter negative.

If I recall correctly, I don't get shock when I reverse the polarity of my relay. I stand corrected.

[Electrotek]

Radiant Energy is non-Maxwellian and travels with a non-spherical wavefront. This means that an individual Ray does not get wider with distance, even if a bundle of Rays diverge due to the source angle.

As shown by the Minto Antenna, this energy is super luminal at frequencies below around 40 kc/sec or kilo pulses. (The energy is non Hertzian.) At much higher frequencies, the propagation is much slower than light. This pronounced difference in velocity from one frequency to another facilitates pulse forming - much easier than with EM.