Aromaz Radiant Energy Joint Research Group

[Aromaz]

[QUOTE=Joit;44112.......What i remeber, they allways had Problems to find
Investors, maybe this is a good Time, that they can find some........

......The Magnets and this inner Ring what are made at the original Device are magentized in a special Way, and what they have said, its a complicated Process to success, and with much losses.[/QUOTE]

Investors are never a problem - provided you have a working model. On the
other hand, if you want to get investors to experiment with your ideas; that
is a near impossible thing.

I am interested in Prof Searl; usually I would have dumped him BUT talking
of the special magnetized magnets is what caught my attention long time
ago - BECAUSE that might just give me more clues as to what Floyd Sweet
did. Besides the fact I do believe the only way we will be good is the
combined manipulation of aether/electrons and magnetic flux. However,
there is very little available from either Searl or Sweet about how they
modified the magnetic flux.

[Aromaz]

YouTube - Comparison of Tesla Bifilar and Pancake Coils[/url]

THAT is a very interesting video presentation. One that calls for me to clear
table right away and duplicate this experiment.

Thanks for this links Ben!

[Inquorate]

@ Aromaz

Lol, but try to get some sleep!

[Joit]

About SEG.
I found once a Page, where they showed the Roller.
It magnetized like a Grid, but no Idea about the Size of it.
And he swapped some Sides, i think.
That why he did need a special Apperature for that.
There are few Hits, when i put 'searl seg magnetizing' into Google.
The Searl-Effect Generator
Invention of the SEG
Even this first Link, where they show the way of it doesnt look like a easy Thing,
And another Page mentions something from special Material for Magnetizing.
I guess, i do need a Magnetizer

[Inquorate]

Pancake coil winding

I had a Duh moment last night re pancake coil winding. The guy in youtube links I posted used cd stack and cd. I couldn't get that stable enough. So I chucked a tiff (in the last 3 weeks I've had 3 hours to myself to experiment so I'm getting short tempered) and threw cd stacker at my dead computer.

Then the light went on; I've had two old harddrives lying around I'd been thinking of turning into bedini motors. I'll use them to turn out pancake coils instead!

:-)

[samedsoft]

DEAR AROMAZ!!

Please check http://jlnlabs.online.fr/cnr/images/neg3osdg.gif
A Negative Differential Resistance Oscillator with a Negistor
Loaded The NDR Oscillator with LOAD

AND FINALLY:

Please download before it is gone:

http://jnaudin.free.fr/html/lmdtem.htm

This one is verified by Eric Dollard. Great OU!

[Aromaz]

@samedsoft: #426

Excellent !!! Start production and get it into the world.
All the poor people are awaiting this magical device.

Borderland (E Dollard and Dr Lindeman) completed this invention in 1988.
?? Then why are they still trying to achieve the same goal ??

JNL Duplicated the same experiment in 1998 - yet ??

Please download before it is gone:

The websites you are reffering to are on line for 10+ years now,
will not go off soon.

[Aromaz]

Pancake coil

Then the light went on; I've had two old harddrives lying around I'd been thinking of turning into bedini motors. I'll use them to turn out pancake coils instead!
:-)

That is still small! I do think you will need to do bigger coils to get the effect - at least 20 cm. I used 15mm plywood, drilled hole and used washers to space. Very rigid, easy and cheap. Do not even need to be round, just two square pieces, use long bolt on axle, clamp bolt in vice and roll on.

I was hoping to have my flat wire, last week they send me wrong item. Hope to get it soon!

[samedsoft]

@samedsoft: #426

Borderland (E Dollard and Dr Lindeman) completed this invention in 1988.
?? Then why are they still trying to achieve the same goal ??

Dear Aromaz

I feel sorry. I thought, the info they supply was real.

I will try anyway.

Could you let me know how can we achieve zero resistance circuit with load? Under resonance.

Thanks.

[Inquorate]

@ samedsoft

Read (very short) 1x input 2x output thread, and previous page of this thread.

What you're saying might be possible.

[Aromaz]

Could you let me know how can we achieve zero resistance circuit with load? Under resonance.

Resonance is depending on CEMF; thus I am not sure that one might be able
to get resonance without resistance.

To get zero resistance - two options:

A) Wireless - as the word say,
or signal around outside of conductor
or using hollow tube for signal i.e. Channel transmission, fibre optics, etc.
CERN in Switzerland is also example of using zero resistance

B) Zero temperature for conductor, done all the time (Almost) with small and
big loads. Use liquid nitrogen, hydrogen or helium.

[samedsoft]

Dear Aromaz,

There is resistance on the OSC right?

This work is quite similar to Dr. Stiffler design.

He uses his own OSC.

On ESEC he uses Copper CAP as kind of radiant energy receiver.

http://67.76.235.52/images/secchg100.gif

http://67.76.235.52/images/esec20_383.jpg

[Aromaz]

There is resistance on the OSC right?

I did not do that circuit. There are some 266 pages of up to date information available on:


Selfrunning cold electricity circuit from Dr.Stiffler


I am sure in that forum you will find a number of people who did the circuit and can answer all your questions.

On ESEC he uses Copper CAP as kind of radiant energy receiver.

That copper shield only picks up electrons emited form the cap under high voltage.
Same as with my fluorecent tube with copper wire around it.
Same as with shielded copper wire.

Yes it is Radiant energy - but HV (electrons) energy radiated from the inside of the cap.

[Aromaz]

.....re pancake coil winding.

Tired of waiting and wrong deliveries; took off to Bangkok yesterday and
walked for miles on market. Eventurally in a small obscure shop in small
almost lane; I found flat magnetic wire. And penty too. Bloke must have
known he had a gem cause he was extra expensive!

Got 5x2mm and 8x2mm rolls. Nice; now I can start winding them Tesla pancakes.
Also happy to find two 500Watt AC speed controlled motors 25RPM to 900 RPM, Nice for coil winding machine!

[Aromaz]

Tesla Pancake

I think we might need to look with different eyes at this pancake of Tesla.

Patent:
http://www3.telus.net/chemelec/Proje...sla-Patent.png

Page 1, Line 10: ....in which alternating currents are employed the self-induction.....by giving rise to false currents.....

Meaning this coil might be more effective with AC current?
That might bring us back to CEMF?

More to think about and experiment.

Essentially this coil is a capacitor; sort of acting like a coil; or coil sort of acting like a capacitor.