The Watson Machine

[Turion]

I plan on mechanical switching using spark gaps. For my motor I am replicating Gary Stanley's air coil motors which have little or no Lenz loss because of the way they are constructed, and with the use of spark gaps (yes THOSE things again) can actually contribute some power to this setup. (See the Gary Stanley thread here at EF)
With my weighted shaft and flywheel, a Lenzless pulse motor and 16 coils run through spark gaps, I hope I have something interesting when I am done. I will be charging a large capacitor bank I have constructed, and charging my batteries from that.

There will be 8 different rotors on my shaft, some for the motor and some for the energizer, and none of them firing at the same time, so I should be able to get the shaft up to pretty high speed with all that kick the rotors will be putting out. I guess time will tell.

I have been working on this idea for some time, and have finally gotten it all to come together. My magnets just got here on Friday, so I am going to start bolting things together come Tuesday morning.

[Turion]

Here is my build in its first stage. I decided to change my design some. Magnets at the outside edges of my rotors will help to achieve the flywheel effect I am looking for. Instead of having my coils between my rotors, I have them pointing toward the rotors from the outside, so magnets are only interacting with one end of the coil instead of both ends like I had planned at first. My shaft is twice as long as what appears in the picture, so I can add more rotors or the Gary Stanley motor to drive it. There are only eight coils in the picture. The other eight will get added tomorrow or possibly Monday. I have a 12 volt series wound (wound rotor and stator) electric motor with a 1/2 inch shaft ordered, and am waiting for it to arrive. I will use it or the Gary Stanley motor to drive this device. I am going to try both, PLUS another 12 volt electric motor I have. Lots of things to try.

For right now I intend to power it by using the simple motor circuit that Matthew Jones uses in his video. You can find Matt.s video on YouTube at YouTube - Simple Motor
There will be one circuit for each coil with a spark gap and a cam to open and close points providing electricity and the back EMF to charge batteries. 16 of those circuits. Matt, if you ever see this, if you look at my picture, the magnets on each rotor are staggered, so that they all fire at different times and there isn't as much opportunity to "lock up" the shaft. I am thinking about using the back emf from one rotor to power the next set of coils, which powers the next, which powers the next, and finally dumping the last one to a battery. It's just one of the things on my list to try. Don't even know if it will work. The first step is to get each rotor to work BY ITSELF to turn the shaft, then run them all at once and see what happens. THEN start playing around..

First step is to get the thing built. Oh, and since it appears this topic has been abandoned by everyone but me, hope somebody gets to see this some day, especially if it actually works. LOL

[The Saint]

Xenon

YouTube - "Energy from the Vacuum" Series - Trailer - Pt. 6

YouTube - Breathing more Xenon gas, HD

[Turion]

Not quite ready to fire it up yet. Have some work to do on my timing circuit, and Radio shack only had two reed switches, one of which did not work, so tomorrow I am on the prowl for more reed switches. Luckily, there are a number of Radio Shacks in the area, so I will cruise by a few and see how many I can locate.
Here's a link to a video of what I have put together so far. Anybody else out there got one of these things up and running wanta share?

YouTube - 11Turion's Channel

[arch chicken]

Hi every free energy pioneer!

I live in south africa and have hunted every aveneu open to me, trying my level best to get a hold of jhon bedinni's free energy generator book. Could annyone out there help? I have build symalar devices to the watson machine and have one running for the last year and two months. I wish to read this book of jhon in order to learn more...
My machine produces 3 kilowhatt
I will post photos as soon as I have time

[wrtner]

Mark,

Check Ash's doc here:
http://www.panaceauniversity.org/Joh...Technology.pdf
See pages 78-82

From page 84 onwards.

I've stopped believing in car starter motors which are a hassle.
The bearings need replacing and we need a longer shaft.

[BrandNewWorld]

spec needet

Hi Folks,

I been as well to the Convention I CDA in November and It was very Nice to be with all that people together.The Energy was amazing especially on the Second day.

At the Moment I have to build a pure Energizer to bring back a big size of a Battery.

So I decide To replicate The Bedini/Watsen Energizer.
And run him of a Window-Motor.

I would pretty much appreciate Any information about the Energizer!

for Example: disk diameter,no of Magnet(and Type) number of coils and size and Winding and size of the Cap, etc..

Hope to get some reply's soon, so that i can go on

Kind Regards

Holger

[Bizzy]

Not quite ready to fire it up yet. Have some work to do on my timing circuit, and Radio shack only had two reed switches, one of which did not work, so tomorrow I am on the prowl for more reed switches. Luckily, there are a number of Radio Shacks in the area, so I will cruise by a few and see how many I can locate.
Here's a link to a video of what I have put together so far. Anybody else out there got one of these things up and running wanta share?

YouTube - 11Turion's Channel

Hi Turion,
We have not heard from you in a while. And I was wondering how you are progressing. I am currently workiung on a mechanical timing switch that has much promise, I hope to share with everyone soon.
Bizzy

[kalena555]

this might be way off base here but wouldn't the "lead out" theory of Lawrence Tseung apply to the watson machine? you can find details of the lead out theory here.

http://free-energy-info.co.uk/Chapter4.pdf