High Voltage from Thin Air?

[DrStiffler]

4W FL can't com close to the LED's

Comparing a 4W FL to the 48 LED's, the LED's win hands down.

[mudwump]

Receivers

Doc,

While waiting for parts, I thought I would ask this question. Have you run multiple receivers off of one transmitter and if so, what was the outcome?

I am just trying to figure out if I should be collecting more parts.

Thanks,
Steve

[DrStiffler]

Doc,

While waiting for parts, I thought I would ask this question. Have you run multiple receivers off of one transmitter and if so, what was the outcome?

I am just trying to figure out if I should collecting more parts.

Thanks,
Steve

No, not without major changes. The coils, the trimmer and the top hats must all tune to the same freq. If you add a receiver and do not change the exciter coil it will not load properly. The xmitter coil is also of autoformer design and the tap and the trimmer form a parallel resonate tank that excites the upper section.

So, each set of coils must be designed for a specific configuration.

Hope this answers your question.

[mudwump]

No, not without major changes. The coils, the trimmer and the top hats must all tune to the same freq. If you add a receiver and do not change the exciter coil it will not load properly. The xmitter coil is also of autoformer design and the tap and the trimmer form a parallel resonate tank that excites the upper section.

So, each set of coils must be designed for a specific configuration.

Hope this answers your question.

Ok. I think I initially understand. Thank you.

Your last video, Finding Spatial Resonance Part 6, is really amazing. Could you physically feel the effect, that is biologically?

[Loki67671]

Hey Doc,
Impressive as usual! Do you have room for a used and abused test developer around here? Seems like corporate and the "Macro-Economics" have given me a bit of free time. No more 55 to 60 hour weeks and their grasp on my soul has slipped a bit.

In any case my PC was never the same after the last incident with ESEC and the disappearing OS, power supply, and NIC but the LINUX box lived. This is a resurrected and rebuilt VISTA machine and my exciters don't get the luxury of running very close to it anymore...

I've been watching, as I'm sure you know, and I have to get another new cert but I can dedicate some time now and for the immediate future if you like.

Oh yeah..............Great work Ron...........I'm always impressed sir.

Best regards,
Jim

[Loki67671]

Very Nice shot of the SA in the SR #6 video. I know I have seen that reaction from mine especially while I was working with charging caps.....ACTUALLY just before the PC meltdown stuff............

Now this isn't exactly the same but as my cap bank was charging, and I was charging a large bank of caps to well over 300VDC wireless with an exciter, there would be a time that the spectrum would look just like what you are showing in the video.

Man does that block of LED's get bright as hell. I sure wouldn't mind getting rid of my traditional "heaters"

Best regards,
Jim

[lamare]

Steel balls

@All,

Yesterday, I was at a party where they had a nice steel ball in the garden. These are known as "witch balls" or "gazing globes/balls". "A gazing ball is a highly polished sphere, originally made of glass but now often from metals such as stainless steel, copper and chrome. They are usually used as garden ornaments and frequently mounted on special stands."

I found a couple of places where these can be ordered:

Amazon.com: 12 Inch Silver Stainless Steel Gazing Globe: Patio, Lawn & Garden
10 Inch Silver Stainless Steel Gazing Ball - Gazing Ball Outlet
6" Stainless Steel Dazzling Gazing Ball With Stake - eBay (item 310157728957 end time Aug-01-09 19:37:26 PDT)

And of course one can search at ebay:
steel gazing ball, great deals on Home Garden on eBay!

Might be interesting as antenna's...

[DrStiffler]

Hey Doc,
Impressive as usual! Do you have room for a used and abused test developer around here? Seems like corporate and the "Macro-Economics" have given me a bit of free time. No more 55 to 60 hour weeks and their grasp on my soul has slipped a bit.

In any case my PC was never the same after the last incident with ESEC and the disappearing OS, power supply, and NIC but the LINUX box lived. This is a resurrected and rebuilt VISTA machine and my exciters don't get the luxury of running very close to it anymore...

I've been watching, as I'm sure you know, and I have to get another new cert but I can dedicate some time now and for the immediate future if you like.

Oh yeah..............Great work Ron...........I'm always impressed sir.

Best regards,
Jim

@Jim

Yes, I know... The last time we talked you sounded so bogged down and depressed I did not want to bother you until things worked out. Anyway with the equipment damage, that takes time to recover from.

Hey I still have an unsettled Debt I owe you, so yes lets get back to work. Drop me a line and I can forward a package to you

I've been watching, as I'm sure you know, and I have to get another new cert but I can dedicate some time now and for the immediate future if you like.

Forget the cert., I great leaders have back doors and escrows on all the publicly available programs, gee is it not great to feel wired and so fully protected from ourselves????

Merlin still needs the initial transfer, but as you know will not do images so its down the tubes. Another person on this thread suggested PGP, yet I know for fact that all the commercial cuts have the problems stated above. I was also advised that there exist builds of PGP that have trap, now I do not have the time to wade through hours of C code. To old to even trust the Open Source Site, although the person told me he doubted it would not have been found by now.

So, in short save the hassle, the group has fallen back to hand delivery from trusted source.

[DrStiffler]

Ok. I think I initially understand. Thank you.

Your last video, Finding Spatial Resonance Part 6, is really amazing. Could you physically feel the effect, that is biologically?

@mudwump

I think if you go back a few pages and read forward you will see some of the effects also described by others.

This is what they call a Hot Button Topic and this open forum is not the place to cover than, suffice it to say you can get a headache at the least under the right conditions.

[DrStiffler]

Very Nice shot of the SA in the SR #6 video. I know I have seen that reaction from mine especially while I was working with charging caps.....ACTUALLY just before the PC meltdown stuff............

Now this isn't exactly the same but as my cap bank was charging, and I was charging a large bank of caps to well over 300VDC wireless with an exciter, there would be a time that the spectrum would look just like what you are showing in the video.

Man does that block of LED's get bright as hell. I sure wouldn't mind getting rid of my traditional "heaters"

Best regards,
Jim

@Jim

Yes Indeed, we have been there have we not

I can not post here, but a few in the group have seen and I just at last did a few days ago a display that has been confirmed on some real good gear as real and not overload. Later

Man does that block of LED's get bright as hell. I sure wouldn't mind getting rid of my traditional "heaters"

Remember and I say this for others watching, High Z. I have tied incandescents and all manor of resistive loads in place of the LED's and of them all it seems only our fans work. Carbon resistors can be used (composition) and upwards of 10K, they get nice and hot.

Waiting for mail to embarq

[DrStiffler]

@All,

Yesterday, I was at a party where they had a nice steel ball in the garden. These are known as "witch balls" or "gazing globes/balls". "A gazing ball is a highly polished sphere, originally made of glass but now often from metals such as stainless steel, copper and chrome. They are usually used as garden ornaments and frequently mounted on special stands."

I found a couple of places where these can be ordered:

Amazon.com: 12 Inch Silver Stainless Steel Gazing Globe: Patio, Lawn & Garden
10 Inch Silver Stainless Steel Gazing Ball - Gazing Ball Outlet
6" Stainless Steel Dazzling Gazing Ball With Stake - eBay (item 310157728957 end time Aug-01-09 19:37:26 PDT)

And of course one can search at ebay:
steel gazing ball, great deals on Home Garden on eBay!

Might be interesting as antenna's...

@lamare

Thanks for the posting. You may have missed where I state that I believe the sphere is not needed. I understand the mathematical basis for thinking this, but our work does not show that. In fact if one remembers the different forms of lightening arrester design (excluding rods) the normally looking canopy (tips down and the inverse with the tips up, works quite well. Many shapes work and some seem not to. It all still points to mass, my little Al blocks will work better than 1/2m of wire.

The little SS cups we are using are nice in that you can build in sections to add or subtract when working with different coils. Changing capacity and shape of course are primary and still I feel the sphere is not critical.

[DrStiffler]

Scalar Detector

If it gets into the box its scalar or your body is being fried with RF.

[HairBear]

If it gets into the box its scalar or your body is being fried with RF.

Is there a way I could remove the RF? Would the use of counter wound coils help? Non-inductive windings?

[Loki67671]

Now I'm just going to think out loud here because that damned question will not leave me alone!

"What does mass have to do with it?"

With the exciter we cause a radical excitation of the environment and from that we are attempting to get more energy back, coherent energy conversion, than we have put in. BUT IT IS NOT ANYTHING FREE OR OVER-UNITY OR CREATED FROM NOTHING. It is already present in the surrounding environment as the "glue" or pressure that holds or forces everything together. Perhaps the Aether to some. To me I don't "know" what it is.

The more mass in proximity to the excitation, and not just ANY mass but electrically conductive mass, then I supposed the more cohered energy available?????? Seems to make sense. BUT it's very presence detunes the whole thing including the exciter seemingly AS IT RELATES to the total mass and the desired effect not the primary frequency of oscillation.

So when I stuck my big old aluminum generator on the pancake motor into the bubble I detuned the system such that the stimulation from the exciter was not at the spatial resonant frequency of the mass present in the system and the motor would not turn?

Another point to note is early on we were making heat with NE bulbs and the chokes used in the device at the time were 10uh from supply to collector important yes but of most interest to me right now is the 22uh AND the 47pf capacitor to the parasitic plate. Series Fr = 1 / 2*Pi*SqRt(LC) so this is 4.95Mhz and interestingly the separation between the spikes of excitation were approximately 5 MHz. Hmmmm????

I've been tormented by this thing for over 18 months now SO I'm just blathering some of the observations of a tortured and SEC pummeled mind.

Indeed what does MASS have to do with it............? The weekend is coming up............Got EXCITER?



Best regards,
Jim

[Lidmotor]

One wire energy transmission at a distance---a partial replication

@ Dr Stiffler and All----I am slowly building and gathering parts and it is hard. I did test out my transmitter and receiver "towers" on a standard SEC and got a replication of the long distance power transmission lighting up LEDs. This is not a pure replication and the only reason that I am posting this is to encourage others to keep going. What I am seeing so far looks really good. The amount of light that I am getting out when the coils hit resonance is impressive.
Here is the video of my efforts so far:

YouTube - SEC one wire energy transmission--At a distance

Lidmotor